Ozito OHT-018 Handleiding

Ozito Heggenschaar OHT-018

Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito OHT-018 (8 pagina's) in de categorie Heggenschaar. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

CORDLESS HEDGE

TRIMMER KIT

18V Lithium Ion

INSTRUCTION MANUAL

SPECIFICATIONS

Voltage: 18V

Battery: 1.5Ah Li-ion

Charge Time: 3-5 Hours

No Load Speed: 2,400/min

Cutting Length: 510mm

Cutting Capacity: 15mm

Weight: 3.12kg

OHT-018

WHAT’S IN THE BOX

OZITO

ozito.com.au

1216

Hedge Trimmer

Blade Cover

Battery Pack

Battery Charger

IN ORDER TO MAKE A CLAIM UNDER THIS

WARRANTY YOU MUST RETURN THE PRODUCT

TO YOUR NEAREST BUNNINGS WAREHOUSE WITH

YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY

PLEASE TELEPHONE OUR CUSTOMER SERVICE

HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE

HAVE THE MODEL NUMBER AND DATE OF

PURCHASE AVAILABLE. A CUSTOMER SERVICE

REPRESENTATIVE WILL TAKE YOUR CALL

AND ANSWER ANY QUESTIONS YOU MAY

HAVE RELATING TO THE WARRANTY POLICY

OR PROCEDURE.

The beneﬁts provided under this warranty are in addition

to other rights and remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded

at law. You are entitled to a replacement or refund for a major

failure and for compensation for any other reasonably foreseeable

loss or damage. You are also entitled to have the goods repaired

or replaced if the goods fail to be of acceptable quality and the

failure does not amount to a major failure.

Generally you will be responsible for all costs associated with

a claim under this warranty, however, where you have suffered

any additional direct loss as a result of a defective product you

may be able to claim such expenses by contacting our customer

service helpline above.

3 YEAR REPLACEMENT WARRANTY

Your product is guaranteed for a period of 36 months from the

original date of purchase and is intended for DIY (Do It Yourself)

use only. If a product is defective it will be replaced in accordance

with the terms of this warranty. Lithium Ion batteries are covered

by a 12 month warranty. Warranty excludes consumable parts.

WARNING

The following actions will result in the warranty being void.

• If the tool has been operated on a supply voltage other

than that speciﬁed on the tool.

• If the tool shows signs of damage or defects caused

by or resulting from abuse, accidents or alterations.

• Failure to perform maintenance as set out within the

instruction manual.

• If the tool is disassembled or tampered with in any way.

• Professional, industrial or high frequency use.

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to

the online manual.

Blade Cover

The blade cover protects the blade

when not in use. Simply slide it off

the blade before use. Once nished

operating, place the cover back

over the blade.

Safety Guard

Ensure the safety guard is tted

securely onto the hedge trimmer

before use. Tighten the screws on

either side if necessary.

1. Impact Guard

2. Dual Action Cutting Blades

3. Safety Guard

4. Safety Switch

5. Front Handle

6. Lock-off Switch

7. Sure Grip Handle

8. On / Off Trigger

9. Charge indicator button

10. Battery charge indicators

11. Battery release button

12. Charging adaptor

13. Charger LED

14. Charger cradle

CORDLESS HEDGE TRIMMER

ACCESSORIES

KNOW YOUR PRODUCT

1. ASSEMBLY

SETUP & PREPARATION

CAUTION! ENSURE THE TOOL IS OFF & THE BATTERY

REMOVED BEFORE PERFORMING ANY OF THE

FOLLOWING TASKS.

WARNING! NEVER START THE HEDGE TRIMMER

WHILE THE BLADE COVER IS FITTED.

WARNING! NEVER USE THE HEDGE TRIMMER

UNLESS THE SAFETY GUARD IS PROPERLY

FITTTED.

WARNING! WHEN HANDLING THE BLADE

ASSEMBLY, WEAR NON-SLIP, HEAVY DUTY

PROTECTIVE GLOVES. DO NOT PLACE YOUR

HAND OR FINGERS BETWEEN THE BLADES OR IN

ANY POSITION WHERE THEY COULD GET

PINCHED OR CUT. NEVER TOUCH BLADES OR

SRVICE THE UNIT WITH THE BATTERY PACK

INSTALLED.

Charging the lithium ion battery

Allow at least 3 hours of charge time before initial use of the hedge

trimmer. Charge the battery pack only with the charger provided.

The battery should be charged in a cool dry place.

It will take 2 to 3 charging/discharging cycles before the battery achieves

maximum run time capacity.

1. Connect the charging

adaptor into the main

power outlet.

2. Align the raised ribs on

the charger cradle with

the recess in the battery

and slide the charger

cradle onto the battery

until it locks into place.

3. The charger LED will illuminate red

signifying the battery is charging

4. The charger LED will illuminate green

once the battery if fully charged. A

battery takes around 3-5 hours to

become fully charged.

Note: The battery will not develop a

memory, it does not have to be fully

discharged before recharging.

5. When removing the

charger cradle from the

battery, rst press the

battery release button,

then slide the charger

cradle from it’s position.

Battery Charge Indicator

The purchased battery is

equipped with a battery

indicator to show the state of

the battery charge. Press the

charge indicator button and

look to see how many LED’s

illuminate.

1 RED LED indicates the battery

requires immediate charging.

1 GREEN LED indicates that the

battery has only a low charge and

requires charging soon.

2 GREEN LEDs indicate that the

battery has mid state of charge.

3 GREEN LEDs indicate that the

battery is fully charged.

Battery protection system

The tool is equipped with the battery protection system, which helps to

ensure a long service life.

The output power automatically cuts off during operation when the tool

and battery are placed under the following situations:

• When tool is overloaded:

If this occurs, turn off the hedge trimmer and remove the cause of

overload, then turn the tool back on to restart.

• When the remaining battery capacity becomes low:

Recharge the battery pack

Note: The battery protection system does not in any way damage the

tool

Note: The indicated capacity may be lower than the actual level during

use or immediately after using the tool.

2. BATTERY CHARGING

Product specificaties

Merk:	Ozito
Categorie:	Heggenschaar
Model:	OHT-018

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito OHT-018 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Heggenschaar Ozito

Ozito PXPHTS-1845 Handleiding

8 April 2024

Ozito PXPPK-2520 Handleiding

27 Augustus 2023

Ozito PXPHTK-2545 Handleiding

27 Augustus 2023

Ozito HTER-600U Handleiding

18 Juni 2023

Ozito PXCHTS-018U Handleiding

13 Juni 2023

Ozito PXCPHTS-018U Handleiding

7 Juni 2023

Ozito PXCHTK-218U Handleiding

6 Juni 2023

Ozito OHT-018 Handleiding

30 Mei 2023

Ozito PXCHT-6502U Handleiding

19 Mei 2023

Ozito EPHT-501 Handleiding

13 Mei 2023

Handleiding Heggenschaar

Nieuwste handleidingen voor Heggenschaar

Proviel PVH 600 Handleiding

19 November 2024

Proviel PVHA 24 Handleiding

19 November 2024

Proviel PVH 660 Handleiding

19 November 2024

Proviel PVH 550 Handleiding

19 November 2024

Anova CG2660 Handleiding

17 November 2024

Sovereign SHT 550 Handleiding

16 November 2024

Gardenline GLH 690 Handleiding

16 November 2024

Gardenline GLHT 680 Handleiding

16 November 2024

Gardenline GLH 664 Handleiding

16 November 2024

Gardenline GLHT 551 Handleiding

16 November 2024