Ozito EPHT-501 Handleiding

Ozito Heggenschaar EPHT-501

Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito EPHT-501 (8 pagina's) in de categorie Heggenschaar. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/8
TELESCOPIC
POLE HEDGE
TRIMMER
500W 470MM
INSTRUCTION MANUAL
SPECIFICATIONS
Input Power: 500W
No Load Speed: 3,000/min
Blade Length: 560mm
Telescopic Range: 2.30 - 3.10m
Max. Cutting Length: 470mm
Max. Cutting Diameter: 14.5mm
Noise Rating: 105dB
Weight: 4.4kg
EPHT-501
STANDARD EQUIPMENT
3 YEAR REPLACEMENT WARRANTY*
Your product is guaranteed for a period of 36 months from the original date of purchase.
If a product is defective it will be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: bearings, carbon brushes, blade, and included
accessories.
*This product is intended for DIY use only and replacement warranty covers domestic use.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other than that specified on the machine.
• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents
or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
Ozito Industries Pty. Ltd. 25 Fox Drive, Dandenong South, Victoria 3175 Australia.
ozito.com.au
Telescopic Pole Hedge Trimmer
Blade Cover
1122
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY
YOU MUST RETURN THE PRODUCT TO YOUR NEAREST
BUNNINGS WAREHOUSE WITH YOUR BUNNINGS
REGISTER RECEIPT. PRIOR TO RETURNING YOUR
PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR
CUSTOMER SERVICE HELPLINE:
Australia: 1800 069 486
New Zealand: 0508 069 486
The benefits provided under this warranty are in addition to other rights and remedies which
are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this warranty,
however, where you have suffered any additional direct loss as a result of a defective product
you may be able to claim such expenses by contacting our customer service helpline above.
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE
THE MODEL NUMBER AND DATE OF PURCHASE
AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE
WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS
YOU MAY HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
Combination Key & Screw
Shoulder Strap
Fitting the motor housing
1. Push the tube fully into the motor housing aligning the cutout. Ensure the
motor housing and the rear handle are in the correct orientation when you
do so.
1. Blade
2. Motor housing
3. Pivoting head button
4. Motor tube collar
5. Telescopic tube collar
6. Main tube
7. Shoulder strap retainer
8. Soft grip handle
9. Rear handle
10. Safety switch
11. Trigger switch
12. Extension cord retainer
13. Blade cover
14. Shoulder strap
15. Combination key
16. Assembly screw
TELESCOPIC POLE HEDGE TRIMMER
ACCESSORIES
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
1
3
2
6
9
5
4
7
WARNING! ENSURE THE MACHINE IS TURNED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
10
11 12
2. Screw tight with the motor tube
collar.
WARNING! WHEN HANDLING THE BLADE ASSEMBLY,
WEAR NON-SLIP, HEAVY-DUTY PROTECTIVE GLOVES.
DO NOT PLACE YOUR HAND OR FINGERS BETWEEN
BLADES OR IN ANY POSITION WHERE THEY COULD
GET PINCHED OR CUT. NEVER TOUCH BLADES, MAKE
ADJUSTMENTS OR SERVICE THE UNIT WITH THE POWER
SUPPLY CONNECTED.
Blade cover
The blade cover protects
the blade when not in
use. Simply slide it off the
blade before use. Once
finished operating, place
the cover back over the
blade.
7
13
14
WARNING! NEVER START THE POLE HEDGE TRIMMER
WHILE THE BLADE COVER IS FITTED.
8
15 16
3. Fit the assembly screw in the
hole provided and firmly tighten
to secure in place with the
combination key.
NOTE: The hole in the tube and
the motor housing will align when
assembled correctly.
2. SETUP 3. PREPARATION
Adjusting the telescopic length
1. To unlock the telescopic tube collar, twist
the collar in a clockwise direction while
pointing the blade away from the user.
The locking and unlocking directions are
indicated on the collar.
2. With the collar released, the telescopic tube can be pulled forward out of the
collar, thereby extending its reach.
3. To lock in the desired position, firmly twist the telescopic tube collar in an
anti-clockwise direction, while pointing the blade away from the user.
Attaching the shoulder strap
1. Fasten the carabiner hook on the ends of the shoulder strap to the shoulder
strap retainers.
2. Wear the shoulder strap so that it lies over your shoulder.
3. Using the strap adjuster on the shoulder strap, make adjustments until you
achieve the most comfortable working and cutting position.
4. The shoulder strap is equipped with
a buckle. Wear in such a way that the
buckle is always close to hand. In an
emergency you can quickly unclip by
pressing either side of the buckle.
NOTE: If necessary you can adjust the
position of the shoulder strap retainer on the main tube. To do so, loosen the
bolt with the supplied combination key and move the shoulder strap retainer
as required and then retighten the bolt.
Adjusting the blade tilt
WARNING! DO NOT HOLD THE BLADE IN AN ATTEMPT TO
ADJUST THE BLADE ANGLE. DOING SO MAY RESULT IN
POSSIBLE PERSONAL INJURY.
The cutting head can be tilted to 5 different angles for ease of cutting in
different conditions.
1. Grip the motor housing of the trimmer,
press and hold the pivoting head button.
2. Tilt the head to any of the 5
preset angles, then release
the button to lock the head
in the selected position.
Protective clothing
Make absolutely sure to wear the appropriate, close fitting protective clothing,
such as protective pants, gloves and safety shoes. Wearing hearing protection,
protective goggles and a safety helmet with a face guard will provide
protection against falling and recoiling branches.
WARNING!: NEVER USE THE EQUIPMENT BAREFOOT OR IN
SANDALS.
WARNING! ALWAYS USE A SHOULDER STRAP WHEN
WORKING WITH THE POLE HEDGE TRIMMER. ALWAYS
SWITCH OFF THE EQUIPMENT BEFORE YOU RELEASE
THE SHOULDER STRAP. OTHERWISE THERE IS A RISK OF
INJURY.

Product specificaties

Merk: Ozito
Categorie: Heggenschaar
Model: EPHT-501

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito EPHT-501 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Heggenschaar Ozito

Ozito

Ozito PXPHTS-1845 Handleiding

8 April 2024
Ozito

Ozito PXPPK-2520 Handleiding

27 Augustus 2023
Ozito

Ozito PXPHTK-2545 Handleiding

27 Augustus 2023
Ozito

Ozito HTER-600U Handleiding

18 Juni 2023
Ozito

Ozito PXCHTS-018U Handleiding

13 Juni 2023
Ozito

Ozito PXCPHTS-018U Handleiding

7 Juni 2023
Ozito

Ozito PXCHTK-218U Handleiding

6 Juni 2023
Ozito

Ozito OHT-018 Handleiding

30 Mei 2023
Ozito

Ozito PXCHT-6502U Handleiding

19 Mei 2023
Ozito

Ozito EPHT-501 Handleiding

13 Mei 2023

Handleiding Heggenschaar

Nieuwste handleidingen voor Heggenschaar

Proviel

Proviel PVH 600 Handleiding

19 November 2024
Proviel

Proviel PVHA 24 Handleiding

19 November 2024
Proviel

Proviel PVH 660 Handleiding

19 November 2024
Proviel

Proviel PVH 550 Handleiding

19 November 2024
Anova

Anova CG2660 Handleiding

17 November 2024
Sovereign

Sovereign SHT 550 Handleiding

16 November 2024
Gardenline

Gardenline GLH 690 Handleiding

16 November 2024
Gardenline

Gardenline GLHT 680 Handleiding

16 November 2024
Gardenline

Gardenline GLH 664 Handleiding

16 November 2024
Gardenline

Gardenline GLHT 551 Handleiding

16 November 2024