Ozito PXBWK-250 Handleiding
Ozito
Slagmoersleutels
PXBWK-250
Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito PXBWK-250 (10 pagina's) in de categorie Slagmoersleutels. Deze handleiding was nuttig voor 6 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/10
PXBWS-340
STANDARD EQUIPMENT
Brushless Impact
Wrench
B
R
U
S
H
L
E
S
S
B
R
U
S
H
L
E
S
S
SPECIFICATIONS
Voltage: 18V
No Load Speed: 0-2900/min
Drive Shaft: 12.7mm (1/2”)
Impact Rate: 3000bpm
Max. Torque: 215Nm
Weight: 1.2kg
BRUSHLESS
IMPACT WRENCH
INSTRUCTION MANUAL
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
1220
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to the
online manual.
B
R
U
S
H
L
E
S
S
KNOW YOUR PRODUCT SETUP & PREPARATION
1. ASSEMBLY
BRUSHLESS IMPACT WRENCH
1 2 3 4 5 6
1 1/2” Drive Shaft
2 Tri-Beam LED Light
3 Variable Speed Trigger
4 Battery Seating
5 Belt Clip
6 Forward/ Reverse Lever
1 Align an appropriate 1/2” socket
with the drive shaft.
3 Pull the accessory away from the drive shaft to remove.
2 Push the socket onto the shaft
until it clicks into place.
WARNING! ENSURE THE TOOL IS SWITCHED OFF AND
THE BATTERY IS REMOVED BEFORE PERFORMING ANY
OF THE FOLLOWING TASKS.
WARNING! DO NOT HANDLE ACCESSORIES WITHOUT
GLOVES AS THEY ARE SHARP AND CAN BECOME HOT
AFTER USE, POTENTIALLY CAUSING PERSONAL INJURY.
Inserting & Removing Accessories
BATTERY & CHARGER
This tool is compatible with all battery and chargers from the Ozito
Power X Change Range.
3. CONTROLS
2. BATTERY FITMENT
OPERATION
Variable Speed Trigger
Forward/Reverse Lever
3 Control the speed by adjusting the
amount of pressure applied to the
trigger.
2 To remove screws and bolts, push
the fwd/rev lever hard right.
1 To start the wrench, squeeze the
variable speed trigger.
2 Release the variable speed
trigger to stop the wrench.
1 To drive screws and bolts, push
the fwd/rev lever hard left.
Inserting & Removing the Battery
1 Align the ribs of the battery with
the recess at the base of the
wrench handle and push in until
it clicks into place.
2 To remove, press and
hold the battery release
tab and then slide out.
S
a
b
FWD
REV
Slower Faster
Product specificaties
| Merk: | Ozito |
| Categorie: | Slagmoersleutels |
| Model: | PXBWK-250 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito PXBWK-250 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Slagmoersleutels Ozito
4 Oktober 2022
Handleiding Slagmoersleutels
- Slagmoersleutels Panasonic
- Slagmoersleutels DeWalt
- Slagmoersleutels Hitachi
- Slagmoersleutels Makita
- Slagmoersleutels Milwaukee
- Slagmoersleutels Parkside
- Slagmoersleutels Worx
- Slagmoersleutels Draper
- Slagmoersleutels Hamron
Nieuwste handleidingen voor Slagmoersleutels
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022