Makita 6906 Handleiding

Makita Slagmoersleutels 6906

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita 6906 (36 pagina's) in de categorie Slagmoersleutels. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/36

Impact Wrench Instruction Manual

Boulonneuse à chocs Manuel d’Instructions

Schlagschrauber Betriebsanleitung

Avvitatrici ad Impulso Istruzioni d’Uso

Slagmoersleutel Gebruiksaanwijzing

Llave de Impacto Manual de Instrucciones

Chave de Impacto Manual de Instruço˜ es

Slagnøgle Brugsanvisning

Hamrande Mutterdragare Bruksanvisning

Slagmuttertrekker Bruksanvisning

Iskuväännin Käyttöohje

GR ∫ÚÔ˘ÛÙÈÎﬁ ∫ÏÂÈ‰› √‰ËÁ›Â˜ ¯Ú‹ÛÂˆ˜

6905B

6906

1 2

3 4

ENGLISH Explanation of general view

1Socket

2Anvil

3Counterclockwise

4Reversible switch

5Clockwise

6Limit mark

7Screwdriver

8Brush holder cap

SPECIFICATIONS

Model 6905B 6906

Capacities

Bolt size ................................................................... 12 mm – 20 mm 16 mm – 22 mm

Square drive ............................................................ 12.7 mm 19 mm

Impacts per minute ..................................................... 2,000 1,600

No load speed (RPM) ................................................. 1,700 1,700

Tightening torque ........................................................ 3,000 kg.cm 6,000 kg.cm

Overall length ............................................................. 270 mm 327 mm

Net weight ................................................................... 2.7 kg 5.0 kg

•Due to the continuing program of research and

development, the speciﬁcations herein are subject

to change without prior notice.

•Note: Speciﬁcations may diﬀer from country to

country.

Power supply

The machine should be connected only to a power

supply of the same voltage as indicated on the

nameplate, and can only be operated on single-phase

AC supply. They are double-insulated in accordance

with European Standard and can, therefore, also be

used from sockets without earth wire.

Safety hints

For your own safety, please refer to enclosed safety

instructions.

These symbols mean:

Read instruction manual.

DOUBLE INSULATION

ADDITIONAL SAFETY RULES

FOR MACHINE

1. Wear ear protectors.

2. Check the socket carefully for wear, cracks or

damage before installation.

3. Hold the machine ﬁrmly.

4. Always be sure you have a ﬁrm footing. Be

sure no one is below when using the machine

in high locations.

5. The proper tightening torque may diﬀer

depending upon the kind or size of the bolt.

Check the torque with a torque wrench.

SAVE THESE INSTRUCTIONS.

OPERATING INSTRUCTIONS

Selecting correct socket

Use a correct size socket for bolts and nuts. A wrong

size socket will result in inaccurate and inconsistent

tightening torque.

Installing the side grip (Fig. 1)

For 6906 only

Fit the side grip into the groove on the middle of the

hammer case and fasten securely.

Attaching the socket (Fig. 2)

Selecting a proper socket in size, please insert it into

the anvil so as to ﬁx securely.

Switch action (Fig. 3)

CAUTION:

•Before plugging in the machine, always check to

see that the switch trigger actuates properly and

returns to the ‘‘OFF’’ position when released.

•Change the direction of rotation only after the

machine comes to a complete stop. Changing it

before the machine stops may damage the

machine.

The switch is reversible, providing either clockwise or

counterclockwise rotation. To start the machine, sim-

ply pull the lower part of the switch for clockwise, the

upper part for counterclockwise. Release the switch

to stop.

Product specificaties

Merk:	Makita
Categorie:	Slagmoersleutels
Model:	6906
Kleur van het product:	Black, Blue
Gewicht:	5600 g
Breedte:	327 mm
Diepte:	95 mm
Hoogte:	237 mm
Stroombron:	AC
Input vermogen:	650 W
Reverse:	Ja
Aantal slagen:	1600 bpm
Nominale snelheid:	1700 RPM
Type product:	Slagmoersleutel
Schroef diameter:	M16, M18, M20, M22