Ozito OCPS-036 Handleiding
Ozito
Heggenschaar
OCPS-036
Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito OCPS-036 (6 pagina's) in de categorie Heggenschaar. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/6
CORDLESS
PRUNER
3.6V Lithium Ion
INSTRUCTION MANUAL
OCPS-036
STANDARD EQUIPMENT
Cordless Pruner
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au AC Charging Adaptor
1018
SPECIFICATIONS
Input: 3.6V
Battery: 1.5Ah Li-Ion
Max. Cutting Cap.: Ø12mm
Cutting System: Bypass
Charge Time: 3 Hours
Tool Weight: 0.6 kg
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: cutting blade
and included accessories.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
Blade Cover
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
KNOW YOUR PRODUCT SETUP & PREPARATION
1. BATTERY & CHARGING
1. Cutting Blade
2. Fixed Blade
3. Blade Lock
4. LED Work Light
5. On/Off Trigger
6. Sure Grip Handle
7. Safety Switch
8. State of Charge Indicator
9. Charging Socket
CORDLESS PRUNER
10. Charger Plug
11. AC Charging Adaptor
12. Blade Cover
ACCESSORIES
1
2
3
4
9
10
5
6
7
8
Charging your Lithium Ion Battery
2. Plug the AC charging
adaptor into a power outlet
and switch on the mains
power.
1. Plug the charger plug into the
tools charging socket.
The pruner state of charge indicator will
illuminate red signifying that the battery is
charging. Charging will take up to 3 hours
depending on the level of charge left in the
battery.
The Cordless Pruner’s battery has been shipped in a low
charge condition, and requires charging prior to use. Allow
several cycles of charging and discharging (through use of
the pruner) for the battery to reach its optimum performance /
runtime.
11 12
WARNING! THE POWER SUPPLY FOR THIS CHARGER
SHOULD BE PROTECTED BY A RESIDUAL CURRENT
DEVICE (RATED AT 30mA OR LESS). A RESIDUAL CURRENT
DEVICE REDUCES THE RISK OF ELECTRIC SHOCK.
Note: The charger plug will
only t the charging socket one
way, do not force it if it does
not t rst time.
Note: The AC charging
adaptor light will illuminate
when power is being supplied
to the charger.
Charging is complete when the state of
charge indicator illuminates green.
Note: During the charging procedure, the handle and the
housing of the tool will feel slightly warm to the touch. This is
normal.
Note: The battery will not develop a memory, it does not have
to be fully discharged before recharging.
3. Once the pruning is fully
charged, switch the mains
power supply off and remove
the charger plug from the
tool.
WARNING! THIS CHARGER DOES NOT AUTOMATICALLY
TURN OFF WHEN THE BATTERY IS FULLY CHARGED.
SWITCH OFF AND UNPLUG THE AC CHARGING ADAPTOR
AT THE MAINS WHEN CHARGING IS COMPLETE.
Note: Do not use the pruner during the charging procedure.
2. STARTING AND STOPPING 3. PRUNING TIPS
OPERATION
2. Depress the on/off trigger, the cutting blade will move down
and the two blades will close to cut.
8mm
• For best results always make
the cut above 8mm from the
bud. This allows the wound to
heal properly.
• When removing
unwanted growth
ensure you make
clean cuts that are
angled away from
the buds.
• Prune parallel to existing branches and leaf nodes to
encourage new growth.
• When removing the
entire stem, cut back
to the point where it
branched.
• Each plant is different, slow growing plants will require only
light pruning, fast growing plants will require more frequent
pruning to keep them healthy.
• Ensure you prune all parts of the plant at the same time as
this ensures that there is an even and consistent growth.
1. Press and hold the safety
switch.
Note: While depressed the
LED work light will illuminate.
3. Release the on/off trigger, the two blades will open.
• Remove the blade cover.
• Wear protective gloves and eye protection while working
with the pruner.
X
�
X
�
Before Starting the Pruner Pruning can be done all year round. It is advisable to prune
lightly when the shrub/plant is in full bloom or in its peak. Prune
more heavily when the plant is less active and dormant.
General Pruning
• Regular tip pruning of new growth should be carried out
when plants or shrubs are at a young age ideally seedlings
or rooted cutting stage.
• For higher results tip pruning is best after flowering and
during the season. If you prune too late in the season this
affects and reduces your bloom.
• Tip pruning increases your flowers and creates bushier
plants.
WARNING! NEVER TOUCH THE BLADE WHILE THE TOOL
IS IN OPERATION AND BE AWARE OF THE SHARP EDGES
EVEN WHEN THE PRUNER IS NOT IN USE.
Product specificaties
Merk: | Ozito |
Categorie: | Heggenschaar |
Model: | OCPS-036 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito OCPS-036 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Heggenschaar Ozito
8 April 2024
27 Augustus 2023
27 Augustus 2023
18 Juni 2023
13 Juni 2023
7 Juni 2023
6 Juni 2023
30 Mei 2023
19 Mei 2023
13 Mei 2023
Handleiding Heggenschaar
- Heggenschaar Bosch
- Heggenschaar DeWalt
- Heggenschaar Karcher
- Heggenschaar WOLF-Garten
- Heggenschaar Al-ko
- Heggenschaar Atika
- Heggenschaar Batavia
- Heggenschaar Bavaria
- Heggenschaar Black Decker
- Heggenschaar Brandson
- Heggenschaar Budget
- Heggenschaar Dolmar
- Heggenschaar Echo
- Heggenschaar Efco
- Heggenschaar Einhell
- Heggenschaar Eurogarden
- Heggenschaar Ferm
- Heggenschaar Ferrex
- Heggenschaar Florabest
- Heggenschaar Flymo
- Heggenschaar Fuxtec
- Heggenschaar Gamma
- Heggenschaar Garden Feelings
- Heggenschaar Garden Groom
- Heggenschaar Gardena
- Heggenschaar Gardenline
- Heggenschaar Gartenmeister
- Heggenschaar Greenworks
- Heggenschaar Grizzly
- Heggenschaar Gude
- Heggenschaar Hanseatic
- Heggenschaar Hikoki
- Heggenschaar Hitachi
- Heggenschaar Hoberg
- Heggenschaar Homelite
- Heggenschaar Honda
- Heggenschaar Husqvarna
- Heggenschaar Hyundai
- Heggenschaar Kaaz
- Heggenschaar Kibani
- Heggenschaar Kingcraft
- Heggenschaar Kress
- Heggenschaar Levita
- Heggenschaar Lux Tools
- Heggenschaar Makita
- Heggenschaar McCulloch
- Heggenschaar Metabo
- Heggenschaar Milwaukee
- Heggenschaar Mr Gardener
- Heggenschaar Parkside
- Heggenschaar Pattfield
- Heggenschaar Powerpeak
- Heggenschaar Powerplus
- Heggenschaar Remington
- Heggenschaar Robust
- Heggenschaar Ryobi
- Heggenschaar Scheppach
- Heggenschaar Shindaiwa
- Heggenschaar Skil
- Heggenschaar Sterwins
- Heggenschaar Stiga
- Heggenschaar Stihl
- Heggenschaar Tanaka
- Heggenschaar Tel Sell
- Heggenschaar Texas
- Heggenschaar Toledo
- Heggenschaar Topcraft
- Heggenschaar Trotec
- Heggenschaar Varo
- Heggenschaar Vonroc
- Heggenschaar Worx
- Heggenschaar Yardforce
- Heggenschaar Zipper
- Heggenschaar Black And Decker
- Heggenschaar Cocraft
- Heggenschaar Meec Tools
- Heggenschaar Cotech
- Heggenschaar Fieldmann
- Heggenschaar McGregor
- Heggenschaar Sun Joe
- Heggenschaar Challenge
- Heggenschaar Cramer
- Heggenschaar EGO
- Heggenschaar Grouw
- Heggenschaar Gtech
- Heggenschaar Hurricane
- Heggenschaar MacAllister
- Heggenschaar Maruyama
- Heggenschaar Sovereign
- Heggenschaar Spear & Jackson
- Heggenschaar CMI
- Heggenschaar Powerworks
- Heggenschaar Craftsman
- Heggenschaar Verto
- Heggenschaar G-Technology
- Heggenschaar Jonsered
- Heggenschaar Qualcast
- Heggenschaar Bestgreen
- Heggenschaar Baumr-AG
- Heggenschaar Martha Stewart
- Heggenschaar Mac Allister
- Heggenschaar Deltafox
- Heggenschaar Anova
- Heggenschaar Palmera
- Heggenschaar LawnMaster
- Heggenschaar Ergotools Pattfield
- Heggenschaar Maxbear
- Heggenschaar Yellow Garden Line
Nieuwste handleidingen voor Heggenschaar
6 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024