Ozito HDR-710 Handleiding

Ozito Boormachine HDR-710

Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito HDR-710 (6 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/6
HAMMER
DRILL
710W
INSTRUCTION MANUAL
SPECIFICATIONS
Motor: 710W
Input: 230-240V ~ 50Hz
Chuck Size: 13mm (1/2
”) Keyed
No Load Speed: 0-2,700/min
Impact Rate: 0-43,200bpm
Drilling Capacities: Timber 25mm
Masonry 13mm
Steel 10mm
Weight: 2.3kg
HDR-710
WHAT’S IN THE BOX
Hammer Drill
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase and is intended for DIY (Do It
Yourself) use only. If a product is defective it will be replaced in
accordance with the terms of this warranty. Warranty excludes
consumable parts, for example: carbon brushes, chuck, depth rod,
chuck key, auxiliary handle, etc.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
Depth Rod
0517
Chuck Key
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
KNOW YOUR PRODUCT SETUP & PREPARATION
1. SIDE HANDLE & DEPTH ROD
The side handle provides additional comfort, control, and guidance
for the hammer drill.
1 Loosen the side handle.
Slide handle onto the collar
mount of the hammer drill.
1 To adjust, loosen the
side handle.
1 Chuck
2 Side Handle
3 Hammer Selector
4 Forward/Reverse Lever
5 Speed Selection Dial
6 Variable Speed Switch
7 Lock-On Button
HAMMER DRILL
2 Adjust to any position, 360°
around the collar mount.
Tighten side handle.
2 Adjust the depth
rod so the bit
extends beyond
the end of the rod
to the required
drilling depth.
3 Tighten the side handle to
secure the depth rod in this
position.
required
drilling depth
Depth Rod
Side Handle
The depth rod helps to drill to a pre-determined depth.
WARNING! Ensure the tool is turned off & disconnected from the
power supply before performing any of the following operations.
8 Chuck Key 9 Depth Rod
ACCESSORIES
2. CHUCK 3. CONTROLS
2 To start drilling squeeze the
variable speed switch.
3 To stop drilling release the
switch.
1 Open the chuck jaws
slightly larger than the
bit you wish to insert.
4 To ensure the bit is
securely fastened,
insert the chuck
key into 1 of the
3 holes on the
chuck. Turn chuck
key clockwise.
3 Hand tighten the chuck
jaws.
2 Insert the drill bit,
making sure it is
centred in the jaws.
OPERATION
1 To lock the drill on, squeeze
the variable speed switch
(a) then depress the lock
on button (b).
2 Release the variable speed
switch, then the lock on
button.
3 To unlock the drill,
squeeze and release
the variable speed
switch.
Variable Speed Switch
Lock On Button
Keyed Chuck
a
b
a
b
1 Plug the tool into the mains power supply.
5 Repeat this step with the two remaining chuck holes.
WARNING! THE POWER SUPPLY FOR THIS PRODUCT
SHOULD BE PROTECTED BY A RESIDUAL CURRENT
DEVICE (RATED AT 30MA OR LESS). A RESIDUAL CURRENT
DEVICE REDUCES THE RISK OF ELECTRIC SHOCK.

Product specificaties

Merk: Ozito
Categorie: Boormachine
Model: HDR-710

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito HDR-710 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Boormachine Ozito

Ozito

Ozito BDP-450 Handleiding

26 Juli 2023
Ozito

Ozito HDR-1050U Handleiding

30 Juni 2023
Ozito

Ozito HDR-3000U Handleiding

19 Juni 2023
Ozito

Ozito HDR-1100U Handleiding

14 Juni 2023
Ozito

Ozito PXBHS-100U Handleiding

14 Juni 2023
Ozito

Ozito PXHDS-301U Handleiding

14 Juni 2023
Ozito

Ozito HDR-5000U Handleiding

14 Juni 2023
Ozito

Ozito DP-350U Handleiding

8 Juni 2023
Ozito

Ozito PXDDS-201U Handleiding

24 Mei 2023
Ozito

Ozito LCD-2050U Handleiding

23 Mei 2023

Handleiding Boormachine

Nieuwste handleidingen voor Boormachine

DeWalt

DeWalt DCD1624 Handleiding

2 Januari 2025
Makita

Makita DDF459 Handleiding

21 December 2024
Total

Total TRHLI1601 Handleiding

16 December 2024
Black Decker

Black Decker 1963 Handleiding

8 December 2024
Black Decker

Black Decker 1350-09 Handleiding

8 December 2024
Gude

Gude GTB 16/5 R Handleiding

8 December 2024
Hikoki

Hikoki DV36DA Handleiding

7 December 2024
Hikoki

Hikoki DH26PC2 Handleiding

7 December 2024
Hikoki

Hikoki DH28PCY2 Handleiding

7 December 2024
Zipper

Zipper ZI-BHA1500DN Handleiding

7 December 2024