Ozito ESA-1231U Handleiding

Ozito Grasmaaier ESA-1231U

Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito ESA-1231U (3 pagina's) in de categorie Grasmaaier. Deze handleiding was nuttig voor 83 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

SCARAFIER /

LAWN AERATOR

1200W

ORIGINAL INSTRUCTIONS

SPECIFICATIONS

Power Rating: 1200W

Working Width: 310mm

Scariﬁer Roller: 8 double blades

Aerating Roller: 42 claws

Scarifying Depth: -3 / 3 / 7 / 9mm

Catcher: 28 litre

Protection Type: IPX4

Protection Class: II

Weight: 10.87kg

ESA-1231U

WHAT’S IN THE BOX

Scariﬁer / Lawn Aerator

Handle Fasteners

Catcher and Frame

This equipment is not to be used by people (including children) with disabilities, whether physical, sensory or cognitive,

or by people without prior experience/adequate knowledge of the equipment, without supervision by qualied safety

personnel, or instructions on how to use it.

Children should be supervised, to ensure that they do not play with the equipment

Replacing the power cable

If the power cable for this equipment is damaged, it must be replaced by the manufacturer or its after-sales service or

similarly trained personnel to avoid danger.

CAUTION: To prevent a risk arising from the unintentional resetting of the thermal cut out, never connect the equipment

to an external switching device such as a timer switch or to an electric circuit which is regularly switched on and off.

Safety instructions

1.1 General Safety Instructions for this electrical equipment

¥ This equipment is not to be used by people (including children) with disabilities, whether physical, sensory or cognitive,

or by people without prior experience/adequate knowledge of the equipment, without supervision by qualied safety

personnel, or instructions on how to use it.

¥ Children should be supervised, to ensure that they do not play with the equipment

1.2 Safety instructions for electric scariers

¥ Both before and after every time the equipment is used, check for damage and wear to the mains connection and

extension cable. The equipment must not be used if cables are damaged.

¥ If the electricity supply should get damaged during use of the equipment, the plug must immediately be removed from

the socket. The mains connection and extension cable must not be touched until the plug is removed from the socket.

¥ Before each use, check the equipment for possible damage. The equipment should not be used if it is damaged, and

must not be used up until it has been attended to by a specialist/our customer service personnel.

¥ If the equipment vibrates excessively, switch it off immediately and remove the plug from the socket. Tilt the equipment

to examine the scarier rotor for possible causes of imbalance and remove these as necessary. - Always wear gloves

when working with this equipment, to avoid cuts. Should this not be the cause, consult one of our service personnel for

repairs.

¥ When starting, both hands must be on the handle, the equipment must be on the ground, and must not be overturned.

¥ Safety components must be checked for damage before each use, and if any damage is present, must be replaced by

our customer service personnel.

Warning

Danger! The Lawn Scarier (Lawn ventilator) must not be used if any connections are damaged or worn out.

Danger! Do not connect a damaged cable to the power supply and do not touch the cable before it is

disconnected from the power supply. A damaged cable may result in contact with active parts.

Danger! Do not touch the teeth before the equipment is disconnected from the power supply and the teeth have

reached a complete standstill.

Danger! Keep the extension cables away from the teeth. The teeth could damage the cables and lead to contact

with active parts.

Danger! Always interrupt maintenance work (by removing the plug from the socket):

¥ when the equipment is left unattended,

¥ before a trapped tool is freed from the machine,

¥ when the equipment is checked, cleaned, or having maintenance work done

¥ after a foreign body has been hit,

¥ or if the equipment vibrates abnormally.

It is advisable only to connect the equipment to an electricity supply which is protected by a residual-current operated

protective device (RCD) with a release current of max. 30 mA.

Preparations

a) Never allow children or other persons who are not familiar with the operating instructions to use the equipment. Contact

your local governmental agency for information regarding minimum age requirements for the user;

b) Never use the machine while other people, particularly children or animals, are nearby;

c) Always keep in mind that the operator or user of the equipment is responsible for accidents or risks involving other

persons or their property;

d) Wear hearing and eye protection while operating the machine;

e) Always wear sturdy, non-slip footwear and long trousers when using the equipment. Never use the equipment barefoot

or in sandals;

f) Check the ground on which the equipment will be used and remove stones, sticks, wire, bones and other foreign bodies

that could be caught up and violently ung out;

g) Before use, always visually examine the tools and bolts for signs of wear or damage. To prevent any imbalance,

replace worn out or damaged tools and bolts as a set only;

h) If you operate equipment with an ejector at the rear and exposed rear rollers without a debris device, you must wear

full eye protection at all times.

Handling

a) Only use the equipment in broad daylight or in well-lit conditions; b) If possible, the equipment should not be used on

damp grass, but if this cannot be avoided, take special care to ensure that you do not slip;

c) Always maintain good footing on slopes;

d) Only operate the equipment at a walking pace;

e) Always guide the equipment across slopes, never straight up or down;

f) Be particularly careful when you change direction on a slope;

g) Do not work on overly steep slopes;

h) Be particularly careful when you turn the equipment around or pull it toward yourself;

i) Stop the tools if the equipment has to be tipped to one side for transport purposes. Stop the tools if you cross any

surfaces other than grass and whilst transporting the equipment from and to the area on which you wish to use it;

j) Never use the equipment with damaged or missing safety devices, e.g. without deector plates and/or the grass

collecting device;

k) Do not adjust or over clock the engine speed settings;

l) Uncouple all tools and drive units before you start the engine;

m) Use the ON/OFF switch with caution, according to the manufacturer‘s advice. Make sure that your feet are far enough

away from the tool(s).

n) Do not tilt the equipment when you start the engine, unless the equipment must be raised off of the ground a little, in

order to start it. In this case, tilt it as little as absolutely necessary and only raise the side opposite to that of the user;

o) Do not start the motor if you are positioned in front of the chute;

p) Never move your hands or feet toward or under any rotating parts. Keep clear of the chute opening at all times;

q) Never lift or carry the equipment with the engine running.

Maintenance and storage

a) Make sure that all nuts, bolts and screws are tightened securely to ensure that the equipment is in safe working

condition;

b) Allow the motor to cool before you put the equipment in an enclosed area;

c) to avoid risk of  re, keep the ventilation openings free of grass, straw, moss, leaves and similar materials,

d) Make regular checks on the grass collecting device for wear or damaged parts;

e) Check the equipment at regular intervals and replace worn or damaged parts for your own safety.

Ozito Industries will not be responsible for any damage or injuries

caused by repair of the tool by an unauthorised person or mishandling

or mistreatment of the tool. This tool is designed for Domestic Home Use

only. Use in commercial or industrial environments will void the warranty.

CAUTION!: ALWAYS HANDLE THE ROLLER WITH CARE

– SHARP EDGES COULD CAUSE SERIOUS INJURY.

USE GLOVES.

MAINTENANCE

WARNING!: BEFORE CLEANING OR CARRYING

OUT ANY MAINTENANCE PROCEDURE, MAKE

SURE THAT THE MOTOR IS OFF AND THE TOOL

DISCONNECTED FROM THE POWER SUPPLY TO

PREVENT ACCIDENTAL STARTING.

Removing the Roller

1. With a 5mm hex key (not included),

remove the two bolts.

Fitting the Roller

• Keep all nuts, bolts and screws tight to be sure the scarier aerator is in a

safe working condition.

• Check the catcher frequently for wear or deterioration.

• Replace worn or damaged parts for safety.

• Only use the replacement roller specied for this product.

• Be careful during adjustments of the scarier aerator to prevent entrapment

of the ngers between moving roller and xed parts of the machine.

• Oil the wheel pins.

• When not in use, the scarier aerator should be stored in a dry, frost-free

location, out of reach of children. If the housing requires cleaning, do not use

solvents but a moist soft cloth and brush only.

• Frequently check the roller bolt threads are rm and tight.

CAUTION!: DO NOT TOUCH ROTATING ROLLER.

ADDITIONAL SAFETY INSTRUCTIONS

ozito-diy.co.uk

OZITO UK Unit 9 Stadium Court, Wirral International Business Park, Plantation Road, Bromborough, Wirral, CH62 3QG

All of our products undergo strict quality checks to ensure that they reach

you in perfect condition. In the unlikely event that your device develops a

fault, please contact our service department at the address shown on this

guarantee card. You can also contact us by telephone using the customer

service number shown. Please note the following terms under which

guarantee claims can be made:

1. These warranty terms regulate additional warranty services, which the

manufacturer mentioned below promises to buyers of its new products

in addition to their statutory guarantee claims are not affected by this

guarantee. Our guarantee is free of charge to you.

2. The warranty services only covers defects due to material or

manufacturing faults on a product which you have bought from the

manufacturer mentioned below are limited to either the rectication of said

defects on the product or the replacement of the product, whichever we

prefer.

Please note that our devices are not designed for use in commercial, trade

or professional applications. A guarantee contract will not be created if the

device has been used by commercial, trade or industrial business or has

been exposed to similar stresses during the guarantee period.

3. The following are not covered by our guarantee:

- Damage to the device caused by a failure to follow the assembly

instructions or due to incorrect installation, a failure to follow the operating

instructions (for example connecting it to an incorrect mains voltage or

current type) or a failure to follow the maintenance and safety instructions

or by exposing the device to abnormal environmental conditions or by lack

of care and maintenance.

- Damage to the device caused by abuse or incorrect use (for example

overloading the device or the use or unapproved tools or accessories),

ingress of foreign bodies into the device (such as sand, stones or dust,

transport damage), the use of force or damage caused by external forces

(for example by dropping it).

- Damage to the device or parts of the device caused by normal or natural

wear or tear or by normal use of the device.

4. Your Product is guaranteed for a period of 36 months from the original

date of purchase and is intended for DIY (Do It Yourself) use only. Warranty

excludes consumable parts. Guarantee claims should be submitted

before the end of the guarantee period within two weeks of the defect

being noticed. No guarantee claims will be accepted after the end of the

guarantee period. The original guarantee period remains applicable to the

device even if repairs are carried out or parts are replaced. In such cases,

the work performed or parts tted will not result in an extension of the

guarantee period, and no new guarantee will become active for the work

performed or parts tted. This also applies if an on-site service is used.

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST

RETURN THE PRODUCT TO THE PLACE OF PURCHASE WITH YOUR

Please refer to the restrictions of this warranty concerning wearing parts,

consumables and missing parts as set out in the service information in

these operating instructions.

CUSTOMER SERVICE HELPLINE

GB: 0151 294 4488

IRL: 1850 882711

Ozito-diy.co.uk

WARRANTY

1117

SPARE PARTS

Spare parts can be ordered from the Special Orders

Desk at your local Bunnings Warehouse or Homebase

store.

For further information, or any parts visit

www.ozito-diy.co.uk or contact Ozito Customer Service:

Great Britain: 0151 294 4488

Ireland: 1850 882711

E-mail: info@ozito-diy.co.uk

ELECTRICAL SAFETY

DESCRIPTION OF SYMBOLS

GENERAL POWER TOOL SAFETY WARNINGS

SERVICE INFORMATION

Please note that the following parts of this product are subject to normal

or natural wear and that the following parts are therefore also required

for use as consumables.

* Not necessarily included in the scope of delivery!

Category Example

Wear parts* V-belt, Roller

Consumables*

Missing parts

DECLARATION OF CONFORMITY

Gao/Product-ManagementWeichselgartner/General-Manager

explains the following conformity according to EU directives and norms for

the following product

Electric Scari er and Lawn Aerator ESA-1231U (Ozito)

2014/29/EU

2005/32/EC_2009/125/EC

2014/35/EU

2006/28/EC

X 2014/30/EU

2014/32/EU

2014/53/EC

2014/68/EU

90/396/EC_2009/142/EC

89/686/EC_96/58/EC

X 2011/65/EU

X 2006/42/EC

Annex IV

Noti ed Body:

Noti ed Body No.:

Reg. No.:

X 2000/14/EC_2005/88/EC

X Annex V

Annex VI

Noise: measured L

WA = 96 dB (A); guaranteed L

WA = 99 dB (A)

P = 1,2 KW; L/Ø = 31 cm

Noti ed Body:

2012/46/EU

Emission No.:

Standard references: EN 60335-1; EN 50636-2-92; EN 13684; EN 62233;

EN 55014-1; EN 55014-2; EN 61000-3-2; EN 61000-3-3

Landau/Isar, den 11.09.2017

First CE: 17 Archive-File/Record: NAPR017666

Art.-No.: 30.002.08 I.-No.: 11017 R. GehardDocuments registrar:

Subject to change without notice Wiesenweg 22, D-94405 Landau/Isar

ISC GmbH · Eschenstraße 6 · D-94405 Landau/Isar

For EU countries only

Never place any electric power tools in your household refuse.

To comply with European Directive 2012/19/EC concerning old electric

and electronic equipment and its implementation in national laws, old

electric power tools have to be separated from other waste and disposed

of in an environment-friendly fashion, e.g. by taking to a recycling depot.

Recycling alternative to the return request:

As an alternative to returning the equipment to the manufacturer, the

owner of the electrical equipment must make sure that the equipment is

properly disposed of if p1-he no longer wants to keep the equipment. The old

equipment can be returned to a suitable collection point that will dispose

of the equipment in accordance with the national recycling and waste

disposal regulations. This does not apply to any accessories or aids

without electrical components supplied with the old equipment.

The reprinting or reproduction by any other means, in whole or in part, of

documentation and papers accompanying products is permitted only with

the express consent of the iSC GmbH.

Subject to technical changes.

Danger!

Sound and vibration

Sound and vibration values were measured in accordance with EN ISO

3744: 1995, EN ISO 11201: 1995, EN 1033:1995.

Lpa sound pressure level: 85 dB(A)

Lwa sound power level 99 dB(A)

Vibration at the handlebars: 2.71 m/s²

K uncertainty: 1.5 m/s²

Keep the noise emissions and vibrations to a minimum.

• Only use appliances which are in perfect working order.

• Service and clean the appliance regularly.

• Adapt your working style to suit the appliance.

• Do not overload the appliance.

• Have the appliance serviced whenever necessary.

• Switch the appliance off when it is not in use.

• Wear protective gloves.

Caution!

Residual risks

Even if you use this electric power tool in accordance with

instructions, certain residual risks cannot be rules out. The

following hazards may arise in connection with the equipment’s

construction and layout:

1. Damage to hearing if no suitable ear protection is used.

2. Health damage caused by hand-arm vibrations if the equipment is used

over a prolonged period or is not properly guided and maintained.

Important! Read the directions for use before operating

the tool.

Keep other persons (and animals) away from the

danger zone.

Caution! Sharp teeth. The teeth continue to rotate after

the equipment is switched off. Pull the plug out of the

socket outlet before carrying out any maintenance or if the

cable becomes damaged.

Keep the power cable a y from the roller.wa

Guaranteed sound p er level: 99 dBow

Danger! Read the operating instructions to reduce the risk of injury

Wear hearing and eye protection.

ADDITIONAL INFORMATION

Only replace the roller with a genuine Ozito replacement roller, as this will

ensure top performance and safety under all conditions.

TROUBLESHOOTING

Problem Cause Remedy

The motor

fails to start

There is no electricity at

the plug

Check the cable and the

fuse

The cable is defective Check the cable

Switch, switch/plug

block defective

Have machine checked by a

customer service centre

Connections to

motor or capacitor

disconnected

Have machine checked by a

customer service centre

Housing clogged If necessary adjust working

depth. Clean housing so that

the roller can run freely

The motor

performance

drops

Soil is too rm Change working depth

Housing clogged Clean housing

Roller badly worn Replace roller

Imprecise

scarifying

Roller worn Replace roller

Wrong working depth Correct working depth

Motor is

running, roller

is not rotating

Toothed belt is torn Replace belt Cord Clips

WARNING! “Read all safety warnings, instructions, illustrations and specications

provided with this power tool.” Failure to follow the warnings and instructions may result in electric

shock, re and/or serious injury.

Save all warnings and instructions for future reference. The term “power tool” in the warnings refers

to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

1. Work area safety

a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b. Do not operate power tools in explosive atmospheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

c. Keep children and bystanders away while operating a power tool. Distractions can cause you to

lose control.

2. Electrical safety

a. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power tools. Unmodied plugs and matching outlets will

reduce risk of electric shock.

b. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

c. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the

risk of electric shock.

d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase

the risk of electric shock.

e. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a

cord suitable for outdoor use reduces the risk of electric shock.

f. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD)

protected supply. Use of an RCD reduces the risk of electric shock.

3. Personal safety

a. Stay alert, watch what you are doing and use common sense when operating a power tool. Do

not use a power tool while you are tired or under the inuence of drugs, alcohol or medication. A

moment of inattention while operating power tools may result in serious personal injury.

b. Use personal protective equipment. Always wear eye protection. Protective equipment such as dust

mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce

personal injuries.

c. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to

power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your

nger on the switch or energising power tools that have the switch on invites accidents.

d. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may result in personal injury.

e. Do not overreach. Keep proper footing and balance at all times. This enables better control of the

power tool in unexpected situations.

f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away

from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

g. If devices are provided for the connection of dust extraction and collection facilities, ensure

these are connected and properly used. Use of dust collection can reduce dust-related hazards.

h) Do not let familiarity gained from frequent use of tools allow you to become complacent and

ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.

4. Power tool use and care

a. Do not force the power tool. Use the correct power tool for your application. The correct power tool

will do the job better and safer at the rate for which it was designed.

b. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be

controlled with the switch is dangerous and must be repaired.

c. Disconnect the plug from the power source and/or remove the battery pack, if detachable, from

the power tool before making any adjustments, changing accessories, or storing power tools.

Such preventive safety measures reduce the risk of starting the power tool accidentally.

d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the

power tool or these instructions to operate the power tool. Power tools are dangerous in the hands

of untrained users.

e. Maintain power tools and accessories. Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may affect the power tool’s operation. If damaged,

have the power tool repaired before use. Many accidents are caused by poorly maintained power

tools.

f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking

into account the working conditions and the work to be performed. Use of the power tool for

operations different from those intended could result in a hazardous situation.

h) Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

5. Service

a. Have your power tool serviced by a qualied repair person using only identical replacement

parts. This will ensure that the safety of the power tool is maintained.

WARNING! When using mains-powered tools, basic safety precautions, including the

following, should always be followed to reduce risk of re, electric shock, personal injury

and material damage.

Read the whole manual carefully and make sure you know how to switch the tool off in an emergency,

before operating the tool.

Save these instructions and other documents supplied with this tool for future reference.

Before you connect the equipment to the mains supply make sure that the data on the rating plate are

identical to the mains data.

This tool is double insulated therefore no earth wire is required.

If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in order to avoid

a hazard.

Note: Double insulation does not take the place of normal safety precautions when operating this tool. The

insulation system is for added protection against injury resulting from a possible electrical insulation failure

within the tool.

Using an Extension Lead

Please only use power cables that are not damaged. The total length of the power cable should not exceed

40 meters; going beyond this distance will reduce the power output of the electric motor. The power cable

must have a cross-section of 3 x 1.5 mm2. The insulating sheath of lawn mower power cables is frequently

damaged.

Some of the causes for this are:

• Cuts caused by running over the cable

• Pinching when the power cable is dragging under doors and pulled through windows.

• Cracking due to old age of the insulation

• Kinking by improperly fastening or guiding the power cable.

The power cables must, at the very minimum, be of type HO5RN-F and 3-stranded. The cable type must

be printed somewhere on the power cable. Only purchase power cables that are marked as such! Plugs

and socket couplers for the power cables must be made from rubber and be splashproof. There is a limit to

how long power cables can be. Longer power cables require larger conductor cross-sections. Power cables

and connecting lines must be regularly checked for damage. Ensure that the lines are de-energized before

checking them. Completely unwind the power cable. Also check power cable entry points, plugs and socket

couplers for kinks.

2. Lift the roller on this side (1) and pull

out in the direction of the arrow (2).

1. Slide the new roller in the direction of the arrow (1) onto the square-ended

drive and press into the holder (2).

Square Drive

Holder

2. Refasten the roller with the two bolts using a 5mm hex key.

Note: Apply grease to the square drive from time to time so that the rollers can

be changed easily.

Handle Parts

Aerator Roller

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to

the online manual.

KNOW YOUR PRODUCT SETUP & PREPARATION

1. Start/stop lever

2. Safety switch

3. Upper handle

4. Securing knob

5. Mid handle

6. Lower handle

7. Catcher ap

8. Catcher

9. Scarier depth adjustment

10. Scarier roller

2. ASSEMBLY 5. OPERATION TIPS

SCARIFIER / LAWN AERATOR

The scarier depth is adjusted at both front wheels via the depth

adjustment knob.

1. Press and hold the lock-off

button.

WARNING!: ENSURE THE TOOL IS DISCONNECTED

FROM THE POWER SUPPLY BEFORE ASSEMBLY.

Fitting the Lower Handles to Motor Body

1. Inset the lower handle onto the

housing.

1. Place the middle handle inside

the upper ends of the lower

handles. From the handle

securing set, t the bolts

through the outer side of the

lower handle and then through

the hole in the middle handle.

1. Secure the power cord from the

switch housing to the scarier

aerator using the two cable clips

(supplied). To prevent accidental start up of the motor the scarier aerator is

tted with a dual action switch

2. Pull the catcher over the catcher

frame.

1. Push both frame parts into

each other.

WARNING!: DISCONNECT THE SCARIFIER

AERATOR FROM THE POWER SUPPLY AND

ENSURE THE BLADE HAS STOPPED COASTING

BEFORE ADJUSTING THE DEPTH.

Securing the Power Cord to the Handles

Assembling the Grass Catcher

Fitting and Removing Grass Catcher

3. ADJUSTMENTS

Adjusting the Scarier Depth

4. SWITCHING ON/OFF

¥ Lay the power cable on the ground in loops in front of the power

outlet. Scarify away from the power outlet and cable, making sure

that the power cable always trails in the already scaried grass so

that the equipment does not travel over the cable.

¥ Try to scarify in straight lines for a nice, clean look. In so

doing, the aeration swaths should always overlap each other

by a few centimetres in order to avoid bare strips.

Fitting the Middle Handle to the Lower Handles

3. To empty the catcher, lift the

catcher ap with one hand,while

unhooking the catcher with the

other.

1. Lift up the catcher ap with

one hand and hook it onto the

housing from above.

2. Lower the catcher ap. The

catcher ap is held against the

catcher by a spring.

WARNING! KEEP POWER CORD AWAY FROM

ROLLER.

CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK,

WE RECOMMEND THE USE OF A RESIDUAL CURRENT

DEVICE (RATED 30 A OR LESS).m

2. Pull the Start/stop lever towards

the handle and hold in position,

the motor will now start.

3. Release the lock-off button

4. Release the Start/stop lever to

stop the motor.

1. Pull out the adjusting knob and

turn to the left or right into one

of the available positions.

2. Release the knob, check that

it is securely seated in the

required depth.

2. Secure in place with a lower

handle screw. Note: Ensure that the power cord

does not interfere with the catcher

ap and it can be opened and closed

easily.

Cutting Depth Positions

0 - Transport position.

I - Scarier depth 3mm.

II - Scarier depth 7mm

III - Scarier depth 9mm

2. Secure in place by screwing

the handle securing knobs

over the protruding ends of

the bolts.

WARNING! THE ROLLER WILL STOP A FEW

SECONDS AFTER THE SWITCH HAS BEEN

RELEASED. BE AWARE OF THE NECESSARY TIME IT

TAKES FOR THE ROLLER TO STOP. DO NOT ATTEMPT

TO STOP THE ROLLER.

ESA-1231U

1. BEFORE USE

OPERATION

12 13 14 15 16

11. Cable clips

12. Catcher

13. Catcher frame

14. Aerator roller

15. Handle securing set x 4

16. Lower handle screws x 2

Fitting the Upper Handle to the Middle Handle

1. Place the upper handle

over each side of the middle

handle. From the handle

securing set, t the bolts

through the outer side of

the upper handle and then

through the hole in the middle

handle.

2. Secure in place by screwing

the handle securing knobs

over the protruding ends of

the bolts.

Note: The scarier depth must

always be identically set on both

sides.

3. Pull the rubber clips over the

catcher frame.

III

¥ How frequently you should scarify your lawn is determined primarily

by the speed at which the grass grows and the hardness of the soil.

¥ Keep the underside of the equipment clean and remove soil and

grass build-up. Deposits make it more difcult to start the aerator

and decrease the quality of the scarifying.

¥ Always ensure that a safe distance (provided by the long handles) is

maintained between the user and the housing.

¥ Be especially careful when scarifying and changing direction on

slopes and inclines.

¥ Maintain a solid footing and wear sturdy, non-slip footwear and long

trousers.

¥ Always scarify along the incline (not up and down).

¥ For safety reasons, the scarier may not be used to scarify inclines

whose gradient exceeds 15 degrees.

¥ Use special caution when backing up and pulling the scarier

aerator (tripping hazard).

¥ It is recommended that you overlap scarifying paths a little.

Overload Protection

To protect the motor it is equipped with a thermal overload switch

which cuts out when overloaded and starts again automatically after a

short cooling-down period.

Items Supplied

Please check that the article is complete as specified in the scope

of delivery. If parts are missing, please contact our service centre or

the sales outlet where you made your purchase at the latest within

5 working days after purchasing the product and upon presentation

of a valid bill of purchase. Also, refer to the warranty table in the

service information at the end of the operating instructions.

¥ Open the packaging and take out the equipment with care.

¥ Remove the packaging material and any packaging and/or

transportation braces (if available).

¥ Check to see if all items are supplied.

¥ Inspect the equipment and accessories for transport damage.

¥ If possible, please keep the packaging until the end of the

guarantee period.

Danger!

The equipment and packaging material are not toys. Do not let

children play with plastic bags, foils or small parts. There is a

danger of swallowing or suffocating!

Proper Use

The equipment can be used both as a scarier and an aerator

depending on the intended use. Only a few movements are

required to change the roller.

The scarifying roller is designed for ripping moss and weeds -

complete with their roots - out of the soil and for loosening the soil.

As a result your lawn can absorb nutrients better and is cleaned.

The aerating roller scratches the surface of the lawn, helping water

to drain off more easily as well as promoting oxygen intake. Aerate

your lawn throughout the growing period.

The equipment is intended for private use i.e. for use in home and

gardening environments.

Scariers for private use are machines whose annual operating

time generally does not exceed 10 hours, during which the

machine is primarily used to maintain small-scale, residential lawns

and home/hobby gardens. Public facilities, sporting halls, and

agricultural/forestry applications are excluded.

The operating instructions as supplied by the manufacturer must

be kept and referred to in order to ensure that the equipment is

properly used and maintained. The instructions contain valuable

information on operating, maintenance and servicing conditions.

Warning! Due to the high risk of bodily injury to the user, the

equipment may not be used to grind up branch or hedge clippings.

Moreover, the equipment may not be used as a power cultivator to

level out high areas such as mole hills.

For safety reasons, the scarier may not be used as a drive unit for

other equipment or toolkits of any kind, unless specically advised

to do so by the manufacturer.

The equipment is to be used only for its prescribed purpose. Any

other use is deemed to be a case of misuse. The user / operator

and not the manufacturer will be liable for any damage or injuries of

any kind caused as a result of this.

Please note that our equipment has not been designed for use in

commercial, trade or industrial applications. Our warranty will be

voided if the machine is used in commercial, trade or industrial

businesses or for equivalent purposes.

35 6

Product specificaties

Merk:	Ozito
Categorie:	Grasmaaier
Model:	ESA-1231U

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito ESA-1231U stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Grasmaaier Ozito

Ozito CPM-300C Handleiding

10 December 2024

Ozito PXBMK-4047SP Handleiding

16 Maart 2024

Ozito ELM-1230 Handleiding

20 Juni 2023

Ozito ESA-1231U Handleiding

18 Juni 2023

Ozito PXCLMK-218U Handleiding

11 Juni 2023

Ozito PXCLMK-1318EU Handleiding

8 Juni 2023

Ozito PXCSDMK-418U Handleiding

8 Juni 2023

Ozito PXCLMK-418U Handleiding

8 Juni 2023

Ozito LMPC-301U Handleiding

5 Juni 2023

Ozito ELM-1250U Handleiding

2 Juni 2023

Handleiding Grasmaaier

Nieuwste handleidingen voor Grasmaaier

Anova MTC620 Handleiding

22 December 2024

Anova MC100 Handleiding

22 December 2024

Anova CC146T Handleiding

20 December 2024

Anova E60BC Handleiding

20 December 2024

Anova CC151T Handleiding

20 December 2024

Gude 320/20-4 Handleiding

19 December 2024

Zipper ZI-MOS4T Handleiding

19 December 2024

Powerblade 350CX Handleiding

10 December 2024

Powerblade V475 Handleiding

10 December 2024

Stihl RM 253 Handleiding

8 December 2024