Ozito CPM-300C Handleiding

Ozito Grasmaaier CPM-300C

Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito CPM-300C (6 pagina's) in de categorie Grasmaaier. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/6
300MM CYLINDER PUSH MOWER
CYLINDER
PUSH MOWER
300MM
INSTRUCTION MANUAL
SPECIFICATIONS
Cutting Width: 300mm
Cutting Height: 16 - 38mm, 4 positions
Spindle: Ø125mm
Grass Catcher: 16 Litres
Weight: 6.35kg
CPM-300C
STANDARD EQUIPMENT
3 YEAR REPLACEMENT WARRANTY*
Your product is guaranteed for a period of If 36 months from the original date of purchase.
a product is defective it will be replaced in accordance with the terms of this warranty. Warranty
excludes consumable parts, for example: bearings and accessories.
*This product is intended for DIY use only and replacement warranty covers domestic use.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other than that specified on the tool.
• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents
or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
OZITO 25 Fox Drive, Dandenong South, VIC 3175, Australia.
ozito.com.au
Cylinder Mower
Upper Handle
0624
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY
YOU MUST RETURN THE PRODUCT TO YOUR NEAREST
BUNNINGS WAREHOUSE WITH YOUR BUNNINGS
REGISTER RECEIPT. PRIOR TO RETURNING YOUR
PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR
CUSTOMER SERVICE HELPLINE:
Australia: 1800 069 486
New Zealand: 0508 069 486
The benefits provided under this warranty are in addition to other rights and remedies which
are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this warranty,
however, where you have suffered any additional direct loss as a result of a defective product
you may be able to claim such expenses by contacting our customer service helpline above.
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE
THE MODEL NUMBER AND DATE OF PURCHASE
AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE
WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS
YOU MAY HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
Handle Uprights x 2
Grass Catcher
Lower Handle, Bolts & Nuts x 6
10mm
Bolt
Bolt
Tools Required
To assemble the mower handles you
will require a 10 mm spanner (not
included).
Fitting the Handle
1. First, select the upper handle and the two handle uprights. Insert the
two handle uprights into the upper handle.
2. Fasten the handle uprights and upper handle together using two
shorter bolts, through the square holes, and nuts as shown.
3. Place the handle uprights onto the lower handle and fasten together
using the four longer bolts, through the square holes, and nuts as
shown.
1. Upper Handle
2. Handle Upright x 2
3. Lower Handle
4. Wheels
5. Height Adjustment Knob x 2
6. Grass Catcher
7. Blade Adjustment x 2
8. Blades
9. Rear Roller
10. Blade Guard
11. Bolts & Nuts Short x 2
12. Bolts & Nuts Long x 4
CYLINDER PUSH MOWER
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
1
2
3
4
5 6
7 8
12
11
9 10
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
Fitting the Grass Catcher
1. Hook the grass catcher in place on the left and right side of the
roller.
2. Fit the strap over the lower handle and clip together, adjust so the
catcher sits flat when mowing.
4. Now the handle is fully assembled and ready to be attached to the
mower body.
To attach the handle to the mower body, locate the two metal lugs
found forward of the cutting bar adjustment lock nuts. Insert one
of the large holes in the
handle over the lug, then
repeat the same process
on the other side. It may
be necessary to squeeze
the two lower handle arms
together to allow room for
locating the second arm
over the remaining metal
lug.

Product specificaties

Merk: Ozito
Categorie: Grasmaaier
Model: CPM-300C

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito CPM-300C stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Grasmaaier Ozito

Ozito

Ozito CPM-300C Handleiding

10 December 2024
Ozito

Ozito PXBMK-4047SP Handleiding

16 Maart 2024
Ozito

Ozito ELM-1230 Handleiding

20 Juni 2023
Ozito

Ozito ESA-1231U Handleiding

18 Juni 2023
Ozito

Ozito PXCLMK-218U Handleiding

11 Juni 2023
Ozito

Ozito PXCLMK-1318EU Handleiding

8 Juni 2023
Ozito

Ozito PXCSDMK-418U Handleiding

8 Juni 2023
Ozito

Ozito PXCLMK-418U Handleiding

8 Juni 2023
Ozito

Ozito LMPC-301U Handleiding

5 Juni 2023
Ozito

Ozito ELM-1250U Handleiding

2 Juni 2023

Handleiding Grasmaaier

Nieuwste handleidingen voor Grasmaaier

Ryobi

Ryobi R36XLMW26 Handleiding

6 Januari 2025
Anova

Anova MTC620 Handleiding

22 December 2024
Anova

Anova MC100 Handleiding

22 December 2024
Anova

Anova CC146T Handleiding

20 December 2024
Anova

Anova E60BC Handleiding

20 December 2024
Anova

Anova CC151T Handleiding

20 December 2024
Gude

Gude 320/20-4 Handleiding

19 December 2024
Zipper

Zipper ZI-MOS4T Handleiding

19 December 2024
Powerblade

Powerblade 350CX Handleiding

10 December 2024
Powerblade

Powerblade V475 Handleiding

10 December 2024