Ozito DP-350 Handleiding
Ozito
Boormachine
DP-350
Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito DP-350 (8 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/8
DRILL
PRESS
350W 5 Speed
INSTRUCTION MANUAL
DP -350
WHAT’S IN THE BOX
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from the
original date of purchase and is intended for DIY (Do It Yourself) use
only. If a product is defective it will be replaced in accordance with
the terms of this warranty. Warranty excludes consumable parts, for
example: feed wheel handles, keyed chuck, hex key, chuck key, belt.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that speciî™·ed on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction
manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofîž‚ce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The beneî™·ts provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
0714
SPECIFICATIONS
Motor Size: 350W
Input: 230 – 240V ~ 50Hz
No Load Speed: 580, 850, 1220,
1650, 2650/min
Chuck: 13mm Keyed
Spindle Travel: 50mm
Spindle Shaft to
Column Distance: 104mm
Column Height: 395mm
Table Size: 160x160mm
Weight: 16.4kg
Head Assembly
Base
Table
Steel Column
Feed Wheel
Handles x 3
13mm Keyed
Chuck
Column Support
Bolts x 3
Pulley Cover
Knob Assembly
Belt (assembled
to pulleys) 4 & 3mm Hex Keys
Chuck Key
Eye Shield
3
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
0
10
20
30
40
50
Assembling the drill press
1. Carefully remove contents from the packaging.
2. Select a îš¿rm, level surface on which to assemble the drill press.
3. Select the base and
align the column over
the large hole. Align
the holes in the column
support with those in
the base and secure
in place using the 3
column support bolts,
spring and at washers (supplied).
Using a 12mm spanner or shifter
(not supplied) securely tighten all
3 column support bolts.
4. Slide the table support over the
column. Using the table support
lock, secure the table into the
desired position.
5. Lift the head assembly and slide it
down onto the column as far as it
will go. To secure in position install
the two head lock screw. Tighten
using the 4mm Hex key, rotating in
a clockwise direction.
1. Pulley cover
2. Pulley cover knob
3. Feed wheel handles
4. Belt tension knob
5. Head lock screws
6. Feed wheel hub
7. Column
8. Table
9. Table support
10. Table support lock
11. Column support bolts x 3
12. Column support
13. Base
14. Head assembly
15. Depth indicator
16. ON/OFF Switch
17. Depth indicator lock nuts
18. Depth rod support
19. Depth rod
20. 13mm Keyed chuck
21. Depth scale
DRILL PRESS
KNOW YOUR PRODUCT
1
2
4
3
7
8
9
11
10
12
13
1514
1716
1918
2120
22 23 24
5
6
1. ASSEMBLY
SETUP & PREPARATION
WARNING! DURING ASSEMBLY ENSURE THE
DRILL PRESS IS DISCONNECTED FROM THE
POWER SUPPLY.
ACCESSORIES
22. Chuck key
23. 3mm Hex key
24. 4mm Hex key
Installing and removing drill bits
1. Using the chuck key, loosen the
jaws of the chuck by rotating in an
anti-clockwise direction.
2. Insert the drill bit fully into the
13mm keyed chuck.
3. Whilst holding the drill bit in one
hand, rotate the top collar of the
13mm keyed chuck in a clockwise
direction.
Ensure that you tighten all 3 holes
in the 13mm keyed chuck using the
chuck key to securely tighten the
jaws and hold the drill bit in position.
6. To îš¿t the feed wheel handles,
screw them into the feed
wheel hub.
7. To îš¿t the 13mm keyed chuck,
îš¿rst place a piece of timber on
the table and position the 13mm
keyed chuck with the jaws
retracted under the drive shaft.
Raise the table toward the drive
shaft until the 13mm keyed chuck
is approximately 25mm from the
drive shaft.
8. To secure the 13mm keyed chuck to the
drive shaft gently lower the drive shaft
using the feed wheel handles until the
drive shaft is pushed into the rear of the
13mm keyed chuck. A gentle tap on the
timber is required to secure the 13mm
keyed chuck onto the tapered drive shaft.
9. Fit the pulley cover knob to the
pulley cover by using the pulley
cover knob assembly (supplied).
Approx. 25mm
Product specificaties
| Merk: | Ozito |
| Categorie: | Boormachine |
| Model: | DP-350 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito DP-350 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Boormachine Ozito
26 Juli 2023
30 Juni 2023
19 Juni 2023
14 Juni 2023
14 Juni 2023
14 Juni 2023
14 Juni 2023
8 Juni 2023
24 Mei 2023
23 Mei 2023
Handleiding Boormachine
- Boormachine Bosch
- Boormachine IKEA
- Boormachine Panasonic
- Boormachine AEG
- Boormachine DeWalt
- Boormachine Baier
- Boormachine Basetech
- Boormachine Batavia
- Boormachine Bavaria
- Boormachine Berner
- Boormachine Black Decker
- Boormachine Blucave
- Boormachine Bort
- Boormachine Bruder Mannesmann
- Boormachine Defort
- Boormachine Delta
- Boormachine Dremel
- Boormachine Duro
- Boormachine Duro Pro
- Boormachine Ecomac
- Boormachine Economy
- Boormachine Einhell
- Boormachine Elu
- Boormachine Fe Powertools
- Boormachine Fein
- Boormachine Felisatti
- Boormachine Ferm
- Boormachine Ferrex
- Boormachine Festool
- Boormachine Flex
- Boormachine Gamma
- Boormachine Global
- Boormachine Goon
- Boormachine Gude
- Boormachine Hikoki
- Boormachine Hitachi
- Boormachine Holzmann
- Boormachine Huvema
- Boormachine Hyundai
- Boormachine Kawasaki
- Boormachine Kinzo
- Boormachine Kress
- Boormachine Laserliner
- Boormachine Lux Tools
- Boormachine Luxor
- Boormachine Maestro
- Boormachine Makita
- Boormachine Maktec
- Boormachine Max
- Boormachine Metabo
- Boormachine Milwaukee
- Boormachine Parkside
- Boormachine Powerfix
- Boormachine Powerplus
- Boormachine Profitech
- Boormachine Protool
- Boormachine Robust
- Boormachine Rupes
- Boormachine Ryobi
- Boormachine Scheppach
- Boormachine Silverline
- Boormachine Skil
- Boormachine Sparky
- Boormachine Spit
- Boormachine Stanley
- Boormachine Stihl
- Boormachine Stomer
- Boormachine Tanaka
- Boormachine Texas
- Boormachine Toolcraft
- Boormachine Toolland
- Boormachine Topcraft
- Boormachine Trotec
- Boormachine Varo
- Boormachine Velleman
- Boormachine Vonroc
- Boormachine Westfalia
- Boormachine Workzone
- Boormachine Worx
- Boormachine Wurth
- Boormachine Zipper
- Boormachine Clas Ohlson
- Boormachine Black And Decker
- Boormachine Steren
- Boormachine Cocraft
- Boormachine Meec Tools
- Boormachine Genesis
- Boormachine Carat
- Boormachine Eibenstock
- Boormachine Hilti
- Boormachine Cotech
- Boormachine Power Craft
- Boormachine Tacklife
- Boormachine Truper
- Boormachine Festo
- Boormachine Fieldmann
- Boormachine Mafell
- Boormachine Proxxon
- Boormachine Biltema
- Boormachine Malmbergs
- Boormachine Porter-Cable
- Boormachine Sun Joe
- Boormachine Dedra
- Boormachine Graphite
- Boormachine Narex
- Boormachine RIDGID
- Boormachine Tryton
- Boormachine Herkules
- Boormachine MSW
- Boormachine Sthor
- Boormachine Craftsman
- Boormachine Rikon
- Boormachine Cecotec
- Boormachine Verto
- Boormachine Alpha Tools
- Boormachine Hazet
- Boormachine G-Technology
- Boormachine Yato
- Boormachine Total
- Boormachine Stalco
- Boormachine Baumr-AG
- Boormachine Powerblade
- Boormachine Meister Craft
- Boormachine King Craft
- Boormachine Max Bahr
- Boormachine Toolson
- Boormachine Wolfcraft
- Boormachine Kreg
- Boormachine Rok
- Boormachine Netter Vibration
- Boormachine RUKO
- Boormachine Einhell Bavaria
- Boormachine McKenzie
- Boormachine Proviel
- Boormachine Ribimex
- Boormachine Ergotools Pattfield
- Boormachine MyTool
- Boormachine Rodcraft
- Boormachine Bavaria By Einhell
- Boormachine Handwerk
Nieuwste handleidingen voor Boormachine
2 Januari 2025
21 December 2024
16 December 2024
8 December 2024
8 December 2024
8 December 2024
7 December 2024
7 December 2024
7 December 2024
7 December 2024