Ozito CDL-1810 Handleiding

Ozito Boormachine CDL-1810

Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito CDL-1810 (8 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
CORDLESS
DRILL
DRIVER
18V Lithium Ion
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
Chuck Size: 10mm Keyless
No Load Speed: 0-550/min
Torque Setting: 21
Max. Torque: 16Nm
Battery Power: 1.5Ah Lithium Ion
Charge time: 3-5 Hours
Weight: 0.9kg
CDL-1810
WHAT’S IN THE BOX
Cordless Drill Driver
ozito.com.au
18V Battery x 2
Charging Adaptor & Cradle
Belt Clip
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1 2 3 4 5
8
6
9
7
10
8 Charging Cradle
9 Charging Adaptor
10 Charging Jack
11 Belt Clip Removing the Battery Pack
1 Hold down the battery release
button.
2 Slide the battery
out.
11
ACCESSORIES
Adjusting Torque
1 Rotate the torque collar to the desired setting.
Removing a Drill Bit
1 Open the chuck by rotating the
chuck collar and remove the
frill bit.
4 Pull on the bit to
ensure it is î‚¿rmly
secured.
Note: The more the variable speed trigger is depressed, the
faster the drill bit will rotate.
Note: Selecting a higher torque setting will allow the drill to
use more torque to drive the screw in or out. To prevent
damaging the screw head, it is recommended to start at
a low torque setting and increase when necessary.
CAUTION: TO REDUCE THE RISK OF INJURY WE
RECOMMEND THE USE OF GLOVES WHEN HANDLING
DRILL BITS.


Product specificaties

Merk: Ozito
Categorie: Boormachine
Model: CDL-1810

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito CDL-1810 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Boormachine Ozito

Handleiding Boormachine

Nieuwste handleidingen voor Boormachine