Ozito BGBS-240 Handleiding
Ozito
Tafelslijpmachines
BGBS-240
Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito BGBS-240 (8 pagina's) in de categorie Tafelslijpmachines. Deze handleiding was nuttig voor 6 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/8
BENCH GRINDER
& BELT SANDER
150mm / 686x50mm
INSTRUCTION MANUAL
BGBS-240
STANDARD EQUIPMENT
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: grinding wheels,
sanding belts, etc.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specied on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
0519
SPECIFICATIONS
Voltage: 230 - 240V ~ 50Hz
Input Power: 240W S2:30min
No Load Speed: 2,950 min
-1
Grinding Wheel: Ø150 x 20 x Ø12.7mm
Wheel Speed: 23.16 m/s
Belt Speed: 900 m/min
Sanding Belt: 686 x 50 mm
Weight: 7.2 kg
Bench Grinder & Belt
Sander
Safety Shield Bracket
Assembly
Safety Eye Shield
Assembly
Tool Rest
Assemblies x 2
3
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
The Bench Grinder & Belt Sander is a combination device for the
coarse and ne grinding/sanding of metals, woods of all kinds and other
materials using the appropriate grinding wheel or belt.
Securing the Grinder/Sander
Before operating the Bench Grinder
& Belt Sander, it must be rmly
secured to a workbench, or solid
surface.
Insert screws or bolts (not included)
through the four mounting holes on
the base and secure the grinder/
sander to the solid surface.
1. Safety Eye Shield
2. Safety Shield
Adjusting Screw
3. Safety Shield Bracket
4. Wheel Guard Cover
5. Tool Rest Adjustment Knob
(belt sander)
6. Tool Rest (belt sander)
7. Sanding Belt
8. Side Cover Fastening Screw
9. Tool Rest (bench grinder)
10 Grinding Wheel
11 Tool Rest Adjustment
Knob (bench grinder)
12. Foot
13. ON/OFF Switch
14. Mounting Holes
15. Belt Tension/Tracking
Adjustment Knob
16. Belt Limit Adjustment
Screw
BENCH GRINDER & BELT SANDER
KNOW YOUR PRODUCT
1 2 3 4 5 6 7 8
1. ASSEMBLY
SETUP & PREPARATION
WARNING! ENSURE THE BENCH GRINDER & BELT
SANDER IS DISCONNECTED FROM THE POWER
SUPPLY BEFORE PERFORMING ANY OF THE
FOLLOWING OPERATIONS.
IMPORTANT! THE EQUIPMENT AND PACKAGING MATERIAL
ARE NOT TOYS. DO NOT LET CHILDREN PLAY WITH
PLASTIC BAGS, FOILS OR SMALL PARTS. THERE IS A
DANGER OF SWALLOWING OR SUFFOCATING!
9 10 11 12 13 14
15
16
WARNING! THE BENCH GRINDER & BELT SANDER
MUST BE FIXED TO A SECURE BASE IN USE.
Fitting the Safety Shield Bracket
1. Position the safety shield bracket
in front of the wheel guard cover,
aligning the slots on the safety shield
bracket with the holes of the wheel
guard cover.
2. Attach the safety shield bracket to the
wheel guard cover by screwing the
safety shield adjusting screws with the
spring washers and the washers, to
the nuts.
3. Position the safety shield bracket so
that the distance between the grinding
wheel and the safety shield bracket
is as small as possible and does not
exceed 2 mm.
4. Hold the nuts at the rear of the safety
shield bracket in place with a spanner
(not supplied), while tightening
the front adjusting screw with a
screwdriver (not supplied).
NOTE: Adjust the safety shield bracket
periodically to compensate for wear
on the wheel.
Fitting the Safety Eye Shield
1. Position the safety eye shield between
the vertical braces at the top of the
safety shield bracket.
2. Insert a long screw through
a washer, then through
the bracket and safety eye
shield (screws and washers
supplied).
3. Fasten the assembly in place
with a nut (supplied).
4. Hold the nut in place with a spanner
(not supplied), while tightening
the screw with a screwdriver (not
supplied). Do not overtighten.
2 mm
Max.
WARNING! ALL COVERS AND SAFETY DEVICES
HAVE TO BE PROPERLY FITTED BEFORE THE BENCH
GRINDER & BELT SANDER IS SWITCHED ON
Product specificaties
| Merk: | Ozito |
| Categorie: | Tafelslijpmachines |
| Model: | BGBS-240 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito BGBS-240 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Tafelslijpmachines Ozito
3 Oktober 2022
Handleiding Tafelslijpmachines
- Tafelslijpmachines DeWalt
- Tafelslijpmachines Parkside
- Tafelslijpmachines Ronix
- Tafelslijpmachines Yamato
- Tafelslijpmachines Clarke
- Tafelslijpmachines Far Tools
- Tafelslijpmachines Stayer
- Tafelslijpmachines Contimac
- Tafelslijpmachines Rikon
Nieuwste handleidingen voor Tafelslijpmachines
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022