OSD Audio Black R10 Handleiding

OSD Audio Niet gecategoriseerd Black R10

Lees hieronder de 📖 handleiding in het Nederlandse voor OSD Audio Black R10 (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

R10 CEILING SUBWOOFER INSTALL GUIDE

BLACK R10 INSTALL GUIDE

NCR10 Bracket Installation - New Construction

NCR10 Construction Bracket Recommended:

NCR10 Bracket Installation - Retrot

Diagram 1:

Diagram 2:

Diagram 3:

The NCR10 is designed for new construction or retrot applications with it’s unique folding design. The NCR10 may be installed prior to

drywall or after across joists (from 16 - 24 on-center) where a speaker will be mounted.""

1. Find the joist nearest the desired speaker mounting location. If you

need to align the speaker to some other object or molding in the room,

be sure to consider the size of the bafe ange which extends beyond

the mounting hole.

2. Line up the bottom of one of the mounting bars with the bottom of

the joist. This will place the screw holes in an “L” position, ush with

the side of the joist, and the mounting ring “lip” will be facing down-

ward. Attach the mounting bar to the joist using appropriate wood

screws.

3. Make sure that the mounting ring is in a perfectly circular shape

( ) by opening the bracket until the arms come in con-see Diagram 1.

tact with the stoppers. Then, lineup the bottom of the other mounting

bar with the bottom of the same joist. Attach the mounting bar to the

joist using appropriate wood screws.

4. Extend both mounting bars to reach the opposite joist, then line up

the bottoms of each mounting bar with the bottom of the joist. Attach

the mounting bar to the joist using appropriate wood screws.

5. Adjust the position of the mounting ring between the joists, grab

both sides of the mounting ring, where it connects to the mounting bar,

then move the mounting ring to the desired position.

6. The protruding lip of the mounting ring will force the drywall install-

ers to hang the drywall with an appropriate hole cut out around the

mounting ring lip. After the drywall is hung and nished, the speakers

are then easily installed.

1. Find the joist nearest the desired speaker mounting location.

If you need to align the speaker to some other object or molding

in the room, be sure to consider the size of the bafe ange

which extends beyond the mounting hole.

2. Mark the hole using the speakers cut out template. Position

the template in the desired and pencil an outline on the ceiling.

3. Cut the hole. If you are not certain whether any CAUTION:

obstructions exist behind the mounting area, you should start by

cutting a small hole in the center of the penciled template outline

with a drywall saw, cutting at a 45° angle towards the inside of

the hole. ( ) Cutting a small hole at this angle will see Diagram 3.

make drywall repair easier if needed. If there are no obstructions

cut the nished hole at a 90° angle to the ceiling surface.

4. Collapse the mounting ring and the mounting bars to com-

press the bracket to it’s smallest shape (see Diagram 2.)

5. With the mounting lip facing downward, insert the bracket into

the ceiling cavity through the speaker cutout hole previously cut

in the drywall.

6. Make sure that the mounting ring is in a perfectly circular

shape by opening the bracket until the arms come in contact

with the stoppers, then set it into the ceiling hole. Push one of

the mounting bars L-shaped edges until it is ush with the joist,

and the bottom of the mounting bar lines up with the bottom of

the joist. Attach the mounting bar to the joist using appropriate

wood screws.

7. Push the other mounting bar L-shaped edge until it is ush

with the same joist, and the bottom of the mounting bar lines up

with the bottom of the joist. Attach the mounting bar to the joist

using appropriate wood screws.

8. Extend both mounting bars to reach the opposite joist, then

line up the bottoms for each mounting bar with the bottom of the

joist. Attach the mounting bar to the joist using appropriate wood

screws.

All Optimal Speaker Design speaker products have Limited Lifetime Warranty against defects in materials and workmanship. Proof

of purchase must accompany all claims. During the warranty period Optimal Speaker Design will replace any defective part and

correct any defect in workmanship without charge for either parts or labor Optimal Speaker Design may replace returned speakers

with a product of equal value and performance. In such cases, some modication to the mounting may be necessary and are not

Optimal Speaker Designs responsibility.

For this warranty to apply, the unit must be installed and used according to its written instructions. If necessary, repairs must be

performed by Optimal Speaker Design. The unit must be returned to Optimal Speaker Design at the owner’s expense and with

prior written permission. Accidental damage and shipping damage are not considered defects, nor is damaged resulting from

abuse or from servicing performed by an agency or person not specically authorized in writing by Optimal Speaker Design

Optimal Speaker Design sells products only through authorized dealers and distributors to ensure that customers obtain proper

support and service. Any Optimal Speaker Design product purchased from an unauthorized dealer or other source, including

retailers, mail over dealers and on-line sellers will not be honored or serviced under existing Optimal Speaker Design warranty

policy. Any sale of product by an unauthorized source or other manner not authorized by Optimal Speaker Design shall void the

warranty on the applicable product.

Damage to or destruction of components due to application of excessive power voids the warranty on those parts. In these cases,

repairs will be made on the basis of the retail value of the parts and labor. To return for repairs, you must email customer service

at RMA@audiogeargroup.com for a Returned Merchandise Authorization (RMA) number# then the unit must be shipped to

Optimal Speaker Design at the owner’s expense, along with a note explaining the nature of service required. Be sure to pack the

speaker(s) in a corrugated container with at least 3 inches of resilient material to protect the unit from damage in transit.

This Warranty Does Not Cover: Damage caused by abuse, accident, misuse, negligence, or improper operation (installation) •

Any products that have been altered or modied • Any product whose identifying number of decal, serial #, etc. has been altered,

defaced or removed • Normal wear and maintenance.

WARRANTY

Black R10 Manual 9/20

Specications

Type: Passive Ceiling Subwoofer

Woofer: 10" Long Excursion Graphite Cone

Power Handling: 200 Watts

Freq Response: 30 - 120Hz

Sensitivity: 92dB 1W/1m

Grille: Trimless Thin-Bezel held by Neo Magnets

Dimensions: 133/8" x 6½"

Cut Out: 117/8"

Product specificaties

Merk:	OSD Audio
Categorie:	Niet gecategoriseerd
Model:	Black R10

Heb je hulp nodig?

Als je hulp nodig hebt met OSD Audio Black R10 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd OSD Audio

OSD Audio SVC205 Handleiding

20 November 2024

OSD Audio Black R10 Handleiding

18 November 2024

OSD Audio Black S82 MK2 Handleiding

18 November 2024

OSD Audio MVC-25 Handleiding

8 Juli 2023

OSD Audio SS2V70-200W Handleiding

6 Juli 2023

OSD Audio SLS-300 Handleiding

6 Juli 2023

OSD Audio BK-100W70T Handleiding

4 Juli 2023

OSD Audio SSVC1 Handleiding

2 Juli 2023

OSD Audio MVC-50 Handleiding

29 Juni 2023

OSD Audio MVC-100 Handleiding

28 Juni 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Protector AS-5030.3 V2 Handleiding

21 December 2024

Sabrent AU-MMCW Handleiding

21 December 2024

Sabrent AU-2X35 Handleiding

21 December 2024

Sabrent CB-RS232 Handleiding

21 December 2024

Owon 500W Handleiding

21 December 2024

Owon 300W Handleiding

21 December 2024

Sabrent SB-RKTQ4-1TB Handleiding

21 December 2024

Sabrent SB-RKTQ-1TB Handleiding

21 December 2024

Sabrent SB-ROCKET-1TB Handleiding

21 December 2024

Sabrent SB-HTSS Handleiding

21 December 2024