Oricom MTDi2 Handleiding

Oricom Niet gecategoriseerd MTDi2

Lees hieronder de 📖 handleiding in het Nederlandse voor Oricom MTDi2 (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 5 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

MTDi2

Features

Size Display

Specification

Pack includes

Operation

1 x Digital gauge

1 x Heavy duty carry case

2 x Hoses with quick connect fittings

4 x Velcro straps for hose organisation

1. In order to air down, once the air chucks are attached to the tyres, slide valve to the "open"

position.

2. To air up, connect the valve with 1/4" NPT at the base of the gauge to an air source,

open the valve, and turn on your air source. Air will flow from your air source, into the

connected tyres.

3. To check the pressure of your tyres, turn off your air source (if using an air source that does

not have a regulator or pressure switch), close the valve, wait 5 seconds for the tyres to

self-equalize, then power on the Digital Gauge. The pressure reading is what all of the connected

tyres are inflated to. If the tyre pressure needs small deflation adjustments, you can use the

built in bleeder valve on the manifold to release small amounts of air.

Inflation Range

Accuracy

Display Resolution

Compatibility

Battery Type

NPT Air Compressor Connector

2x AAA Batteries

Hose Material 1/4" ID hybrid rubber-PVC

Maximum working pressure

Bursting Pressure

Working tempreature

300PSI

1200PSI

-40°F to 150°F

isplay Type

0-250PSI, 0-17Bar, 0-1720Kpa, 0-17.6 Kg/cm²

±1%

0.1 PSI

Backlit LCD

This Express Warranty is provided by Oricom International

Pty Ltd ABN 46 086 116 369, Unit 1, 4 Sovereign Place, South Windsor NSW 2756, herein

after referred to as “Oricom”.

Oricom warrants that the product is free from defects in materials or workmanship during the

Express Warranty Period. This Express Warranty does not extend to any product from

which the serial number has been removed or was purchased outside of Australia.

The benefits of this Express Warranty are in addition to other rights and remedies you may

have under the Australian Consumer Law. Our goods come with guarantees that cannot be

excluded under the Australian Consumer Law. You are entitled to a replacement or refund

for a major failure and compensation for any other reasonably foreseeable loss or damage.

You are also entitled to have the goods repaired or replaced if the goods fail to be of

acceptable quality and the failure does not amount to a major failure. In the event of a minor

failure, Oricom reserves the right to choose to repair or replace the product.

The Express Warranty Period will be a period of 12 Months beginning on the date of

purchase of the product evidenced by your dated sales receipt. You are required to provide

proof of purchase as a condition of receiving Express Warranty services.

You are entitled to a replacement product or repair of the product at our discretion according

to the terms and conditions of this document if your product is found to be faulty within the

Express Warranty Period. This Express Warranty extends to the original purchaser only and is

not transferable.

Products distributed by Oricom are manufactured using new

materials or new and used

materials equivalent to new in performance and reliability. Spare parts may be new or

equivalent to new. Spare parts are warranted to be free from defects in material or

workmanship for thirty (30) days or for the remainder of the Express Warranty Period of the

Oricom branded product in which they are installed, whichever is longer. During the Express

Warranty Period, Oricom will where possible repair and if not replace the faulty product or

part thereof. All component parts removed under this Express Warranty become the

property of Oricom. In the unlikely event that your Oricom product has a recurring failure,

Oricom may always, subject to the Competition and Consumer Act 2010, at its discretion,

Express Warranty (Australia)

elect to provide you with a replacement product of its choosing that is at least equivalent to

your product in performance.

No change to the conditions of this Express Warranty is valid unless it is made in writing and

signed by an authorised representative of Oricom.

Oricom will not be liable under this Express Warranty, and to the extent permitted by law will

not be liable for any defect, loss, damage or injury arising out of or in connection with a:

1. Failure by you to adhere to the warnings and follow the instructions set out in this user

guide for the proper installation and use of the product;

2. Wilful misconduct or deliberate misuse by you of the product;

3. Any external cause beyond our control, including but not limited to power failure, lightning

or over voltage; or

4. Modification to the product or services carried out on the product by anyone other than

Oricom or Oricom’s authorised service provider.

How to make a claim under your Express Warranty in Australia

Oricom has a simple warranty process for you to follow:

· Please call or email our Customer Support Team, (02) 4574 8888 or

support@oricom.com.au.

· A Customer Support Team member will verify after troubleshooting with you if your product

qualifies under warranty. If so, they will give you a Product Return Authorisation number.

· We will then email or fax a Return Authorisation form and a Repair Notice (if necessary),

together with instructions on how to return the goods for warranty service.

Please note that if a Customer Support Team member advises that your product does not

qualify for return, this warranty does not apply to your product. Products that are authorised to

be returned to Oricom in Australia must include all of the following:

· A completed Return Authorisation form

· A copy of your Proof of Purchase (please keep your original copy)

· The faulty product, including all accessories.

Send the approved returns to:

Oricom International Pty Ltd

Locked Bag 658

South Windsor NSW 2756 Australia

Please note that this Express Warranty excludes expenses incurred by you in returning any

faulty product to us. You must arrange and pay any expenses incurred (including postage,

delivery, freight, transportation or insurance of the product) to return the faulty product to us,

however, we will arrange delivery of the repaired or replaced faulty product to you.

Important Information

Repair Notice

Please be aware that the repair of your goods may result in the loss of any user generated

data (such as stored telephone numbers, text messages and contact information). Please

ensure that you have made a copy of any data saved on your goods before sending for

repair. Please also be aware that goods presented for repair may be replaced by refurbished

goods or parts of the same type rather than being repaired.

KG/CM²

Pressure Gauge

R e:ang

0-250Ps i

0-17Bar

0-170 pa0K

0-17Kg /cm²

LIGHTUNIT

1/4”NPT

2.5”

2.5M

KG/CM²

Pressure Gauge

Rang

0-250Psi

0-17Bar0- 00Kpa17

0- Kg/cm²17

LIGHTUNIT

User Guide

• Quick Connect/Disconnect Tyre Valve Connections

• Anti-Kink/Anti-Tangle Hoses

• Digital Gauge Display

• Quick Disconnects for Compact Storage

• Air Connections for ARB Style Compressors & Standard Compressors

• Large Storage/Carry Bag with Ventilation

• Velcro Straps & Bag for Storage

• Plated Brass Fittings

Caution: Over-inflating your tyres can cause them to burst. Always adhere to the

manufacturer’s recommended pressure levels to avoid risk and ensure safe vehicle operation.

Product specificaties

Merk:	Oricom
Categorie:	Niet gecategoriseerd
Model:	MTDi2

Heb je hulp nodig?

Als je hulp nodig hebt met Oricom MTDi2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Oricom

Oricom MTDi2 Handleiding

11 Februari 2025

Oricom MTDi4 Handleiding

10 Februari 2025

Oricom Rock Light Handleiding

10 December 2024

Oricom Eclipse OBHSSOO Handleiding

2 Juli 2023

Oricom VISO8 Handleiding

27 Juni 2023

Oricom TP4 Handleiding

22 Juni 2023

Oricom WNS100 Handleiding

12 Juni 2023

Oricom WAKE'N' SHAKE WNS10 Handleiding

7 Juni 2023

Oricom VISO10 Handleiding

6 Juni 2023

Oricom Wake 'N' Shake Dynamite WNS80 Handleiding

6 Juni 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Stabila AE-LAR350 Handleiding

11 Februari 2025

Metabo RW 18 LTX 140-2 Handleiding

11 Februari 2025

Foscam FN9108W-B4 Handleiding

11 Februari 2025

Advantech MIO-5377RC7PX-Q8A1 Handleiding

11 Februari 2025

Bright Starts Wanderlights Handleiding

11 Februari 2025

Texas WRS650 Handleiding

11 Februari 2025

Extron Cable Cubby 1202 Handleiding

11 Februari 2025

Extron CPM 102 Handleiding

11 Februari 2025

Extron Cable Cubby 100 Handleiding

11 Februari 2025

Extron Cable Cubby 1252 Handleiding

11 Februari 2025