Oregon Scientific RMW128C Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Oregon Scientific RMW128C (8 pagina's) in de categorie Horloge. Deze handleiding was nuttig voor 83 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
1
GB
RADIO CONTROLLED WATCH
MODEL NO.: RMW128C/ RMW128S
USER’S MANUAL
SECTION 1 INTRODUCTION
Congratulations on your purchasing the RMW128C/ RMW128S
Radio-controlled Watch.
The RF Watch is a compact, easy-to-handle device with smart-
looking design. The RMW128C (Classic Design) and RMW128S
(Sport Design) are designed to automatically synchronize its current
time and date when brought within an approximate 1500km radius
of the radio signal generated from Frankfurt, Germany (DCF77).
This unit also comes with features such as Daily Alarm, Stopwatch,
2nd zone-time and Countdown Timer functions as well as EL back
light.
FEATURES AND KEY CONFIGURATIONS
1. MODE BUTTON
-Press to change the display mode
-Press and hold to enter the setting routine
2. ALARM BUTTON
-Press to display the daily alarm function
-Press and hold to enable/disable the alarm
3. START/STOP (UP) BUTTON
-Press to increase the value of a setting
-Press to start or stop the stopwatch function
-Press and hold to enable auto-reception of radio signal
4. SPLIT (DOWN) BUTTON
-Press to decrease the value of a setting
-Press to reset or change the display of the stopwatch function
-Press and hold to disable auto-reception of radio signal
5. LIGHT BUTTON
-Press to turn on the back light for 3 seconds
6. ZONE BUTTON
-Press to change to 2nd zone time and date display
7. WEEKDAY INDICATOR
8. 2ND ZONE-TIME DISPLAY MODE
9. ALARM MODE
10. ALARM-ON INDICATOR
11. STOPWATCH MODE
12. TIMER MODE
13. RADIO RECEPTION INDICATOR
1
2
6 3
5
4
7
89 13 10 11 12
2
GB
BATTERY
The battery is pre-installed at time of manufacture and should be
replaced by authorized dealer only.
Replace the battery when the weekday indicator starts flashing.
BACK LIGHT
Press the LIGHT button to turn on the back light for 3 seconds.
Note: Frequent use of the backlight will shorten the barttery life.
SECTION 2 THE CALENDAR CLOCK
DISPLAY MODES
Press the MODE button to display the following in sequence:
Time with Seconds
Time with Calendar
Zone Time and Date
Daily Alarm
Stopwatch
Countdown Timer You can also press to display the alarm clock and details.ALARM
Display will return to the last display mode upon release of the
ALARM button.
MODE
3
GB
Press ZONE to display the 2nd zone-time and calender. After 3
seconds the display will return to the Time with seconds display
mode.
ABOUT RADIO RECEPTION
When the unit is within range of its respective radio signals, its
radio-control mechanism will override all manual settings unless
the auto-reception function is mannally disabled by the users.
When the unit is receiving radio signal, the RADIO RECEPTION
icon [ ]will start to blink. A complete reception generally takes
about 2 to 10 minutes, depending on the strength of the radio signal.
After that, the periodical scanning will only take a few seconds.
When the reception is complete, the icon will stop blinking.
For better reception of radio signals, place the watch away from
metal objects and electrical appliances to minimize interference.
To improve the signal reception place the watch on a stable surface
as shown:
TO ENABLE OR DISABLE AUTO-
RECEPTION
If you wish to disable the auto-reception feature while the unit is
within range, press and hold the button for 2SPLIT (DOWN)
seconds. The antenna indicator will disappear and the unit will
NOT respond to radio signals.
To enable the feature again, press and hold the START/STOP (UP)
button for 2 seconds. The antenna indicator will start blinking to
initiate reception automatically.
SETTING THE CALENDAR CLOCK
MANUALLY
When the unit is not within range of the radio signal, you can set the
time and calendar manually.
1. Press and hold the button for 2 seconds.MODE
2. Enter the year using the START/STOP (UP) or SPLIT (DOWN)
buttons. Hold down either button to rapidly increase or decrease
the value.
3. Press the button to confirm the entry.MODE
4. Enter the months using the START/STOP (UP) or SPLIT
(DOWN) MODE buttons. Press the button to confirm the entry.
5. Follow the same pattern to set the days, hours, minutes, seconds
and 2nd time-zone hour-offset (+/- 12 hours).
6. For second-setting, if its value is between 0 to 29, press either


Product specificaties

Merk: Oregon Scientific
Categorie: Horloge
Model: RMW128C

Heb je hulp nodig?

Als je hulp nodig hebt met Oregon Scientific RMW128C stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Horloge Oregon Scientific

Handleiding Horloge

Nieuwste handleidingen voor Horloge