Oregon Scientific RMR112 Handleiding

Oregon Scientific Thermometer RMR112

Lees hieronder de 📖 handleiding in het Nederlandse voor Oregon Scientific RMR112 (11 pagina's) in de categorie Thermometer. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/11

Multi-Channel IN-OUT Thermometer

with Cable Free Sensor and RF Clock

MODEL: RMR112

USER'S MANUAL

INTRODUCTION

Congratulations on your purchase of the RMR112 Multi-Channel

In-Out Thermometer with 433MHz cable free sensor and

radio-controlled calendar clock.

The basic package comes with a main unit, which is the

temperature and calendar clock station, and a remote unit, the

thermo sensor.

The main unit has large read-outs for indoors temperature,

calendar clock and temperatures collected and transmitted by the

remote unit. The main unit can support up to three remote units.

The main unit is capable of keeping track of the maximum and

minimum temperature of different sites. And no wire installation

is required and the RMR112 operates at 433MHz.

As for the calendar clock, it is radio-controlled. It automatically

synchronizes its current time and date when it is brought within an

approximate 1500km radius of the radio signal generated from

Frankfurt, Germany (DCF77).

You can also set the calendar clock manually when it is off range.

Other features include four-language display, four-step crescendo

dual alarms and interchangeable display modes.

MAIN FEATURES

505B(1B5 9/9/04, 9:36 PM1

A. FOUR-LINE DISPLAY

Facilitates easy reading of remote and indoors temperatures

and calendar clock

B. CHANNEL BUTTON

Selects among different channels

C. MEMORY BUTTON

Recalls the maximum or minimum temperature of individual

channels

D. ALARM [24HR OFF] BUTTON

Sets the time for the alarms

E. MODE/SET BUTTON

Toggles the display modes and confirms entry while setting

the values for display

F. RADIO RECEPTION SIGNAL

Indicates the condition of radio reception

G. UP ( ▲ ) BUTTON

Advances the value of a setting

H. DOWN ( ▼ ) BUTTON

Decreases the value of a setting

I. ALARM [ AL ON/OFF] BUTTON

Enables or disables the alarms

J. RESET BUTTON

Returns all settings to default values

K. °C/°F SLIDE SWITCH

Selects between degree Centigrade ( C) and Fahrenheit (° °F)

L. BATTERY COMPARTMENTS

Accommodates two UM-3 or “AA” size 1.5V alkaline bat-

teries

M. REMOVABLE TABLE STAND

For standing the main unit on a ﬂat surface

N. WALL-MOUNT RECESSED HOLE

For mounting the main unit on a wall

MAIN FEATURES: REMOTE UNIT

Made in PRC

505B(1B5 9/9/04, 9:36 PM2

A. LCD

Displays the current temperature monitored by the remote unit

B. LED INDICATOR

Flashes when the remote unit transmits a reading

C. CHANNEL SLIDE SWITCH

Designates the remote unit Channel 1, Channel 2 or Channel 3

D. RESET BUTTON

Returns all settings to default values

E. BATTERY COMPARTMENT

Accommodates two AAA-size batteries

F. BATTERY DOOR

G. WALL-MOUNT RECESS HOLE

For mounting the main unit on a wall

H. MOVABLE TABLE STAND

For standing the remote unit on a ﬂat surface

BEFORE YOU BEGIN

For best operation,

1. Assign different channels to different remote units.

2. Insert batteries for remote units before doing so for the main

unit.

3. Place the main unit as close as possible next to the remote unit,

reset the main unit after installing batteries. This will ensure

easier synchronization between the transmission and recep-

tion of signals.

4. Position the remote unit and main unit within effective trans-

mission range, which, in usual circumstances, is 20 to 30 meters.

Note that the effective range is vastly affected by the building

materials and where the main and remote units are positioned. Try

various set-ups for best result.

Though the remote units are weather proof, they should be placed

away from direct sunlight, rain or snow.

BATTERY AND CHANNEL

INSTALLATION: REMOTE UNIT

1. Remove the screws on the battery compartment.

2. Select the channel number on the CHANNEL slide switch.

3. Install 2 alkaline batteries (UM-4 or “AAA” size 1.5V) strictly

according to the polarities shown.

4. Replace the battery compartment door and secure its screws.

Note that once a channel is assigned to a remote unit, you can only

change it by removing the batteries or resetting the unit.

505B(1B5 9/9/04, 9:36 PM3

Product specificaties

Merk:	Oregon Scientific
Categorie:	Thermometer
Model:	RMR112

Heb je hulp nodig?

Als je hulp nodig hebt met Oregon Scientific RMR112 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Thermometer Oregon Scientific

Oregon Scientific RMR183 Handleiding

20 Juni 2023

Oregon Scientific RMR500A Handleiding

17 Juni 2023

Oregon Scientific JTR168LR Handleiding

17 Juni 2023

Oregon Scientific RAR621 Handleiding

15 Juni 2023

Oregon Scientific AW133 Handleiding

14 Juni 2023

Oregon Scientific RMS300A Handleiding

7 Juni 2023

Oregon Scientific NTS912 Handleiding

6 Juni 2023

Oregon Scientific RMR132 Handleiding

5 Juni 2023

Oregon Scientific RMR500 Handleiding

5 Juni 2023

Oregon Scientific Alizé RMR262 Handleiding

5 Juni 2023

Handleiding Thermometer

Nieuwste handleidingen voor Thermometer

TFA 30.3053.IT Handleiding

19 September 2024

TFA 15.2010 Handleiding

19 September 2024

TFA 30.3039.IT KlimaLogg Pro Handleiding

19 September 2024

TFA 30.1000 Handleiding

19 September 2024

Medel No Contact Handleiding

18 November 2024

Techno Line WS7009 Handleiding

18 November 2024

Techno Line WS 7006 Handleiding

18 November 2024

Techno Line WS 7002 Handleiding

18 November 2024

Techno Line WS 7003 Handleiding

18 November 2024

Techno Line IR 380 Handleiding

18 November 2024