Oregon Scientific BHGR618 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Oregon Scientific BHGR618 (11 pagina's) in de categorie Weerstation. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/11
1
GB
INTRODUCTION
Congratulations on your purchase of the Multi-Channel In-Out
Thermometer / Hygrometer (BHGR618) with a 433MHz cable-free thermo-
hygro sensor.
Enclosed with this package is one (1) main display unit and one (1)
cable-free remote thermo-hygro sensor unit.
The main unit has an LCD that shows recordings for indoor and outdoor
temperatures, humidity, maximum and minimum recordings. The unit
supports up to three 433MHz remote thermo-sensors or thermo-hygro
sensors. A variety of additional sensors can be purchased separately.
No wire installation is required between the main and remote units. As
the BHGR618 operates at 433MHz, it can be used in the U.S. and most
places in Continental Europe.
FEATURES & KEY CONFIGURATION : MAIN UNIT
MULTI-CHANNEL IN-OUT
CABLEFREE
THERMO-HYGROMETER
MODEL: BHGR618
USER’S MANUAL
A
B
C
F
D
E
2
GB
A RF SIGNAL INDICATOR
- Indicates the signal-receiving status of the unit
B Upper window
-Displays the temperature data
C Lower window
-Displays the humidity data
D [ IN / REMOTE ]
-Selects between the main-unit display and a selected remote unit
-Activates search mode
E [ CHANNEL ] button
-Selects among different channels
-Activates remote sensor scanning mode
F [ MEM / CLEAR ] button
-Recalls the maximum or minimum temperature and humidity
readings
-Clears the maximum and minimum temperature and humidity
memory of remote sensor channels or the main unit display
G [ RESET ]
-Returns all settings to default values and erases all memories
H [ °C/°F ] slide switch
-Selects between degree Centigrade (°C) and Fahrenheit (°F)
G
H
3
GB
FEATURES: REMOTE
THERMO-HYGRO SENSOR (Model BHGR 228)
a LED indicator
Flashes when the remote unit transmits a reading
b Upper window
Displays temperature data
c Lower window
Displays humidity data
d [ RESET ]
Returns all settings to default values
e °C/°F slide switch
Selects between Centigrade (°C) and Fahrenheit (°F)
f Channel slide switch
Designates the remote unit Channel 1, Channel 2 or Channel 3
BEFORE YOU BEGIN
To ensure proper functioning of the BHGR618 follow this setup procedure.
For best operation:
1. Assign different channels to different remote units.
2. Insert batteries for remote units before doing so for the main unit (see
instructions for battery installation).
3. Place the main unit as close as possible next to the remote unit, reset the
main unit after installing batteries. This will ensure easier synchronization
between the transmission and reception of signals.
4. Position the remote unit and main unit within effective transmission
range, which, in usual circumstances, is 20 to 30 meters.
a
b
c
d
e
f


Product specificaties

Merk: Oregon Scientific
Categorie: Weerstation
Model: BHGR618

Heb je hulp nodig?

Als je hulp nodig hebt met Oregon Scientific BHGR618 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Weerstation Oregon Scientific

Handleiding Weerstation

Nieuwste handleidingen voor Weerstation