OptiTrack CinePuck Handleiding

OptiTrack Niet gecategoriseerd CinePuck

Lees hieronder de đź“– handleiding in het Nederlandse voor OptiTrack CinePuck (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/4
CinePuck CNP0010
CinePuck
This page provides specicaons and addional informaon for the CinePuck.
The CinePuck is designed specically for Virtual Producon or Broadcast studios. For more informaon on how to use
the CinePuck for Virtual Producon, please visit the Virtual Producon secon of this documentaon.
Acve Markers
LED Specicaons
The following specicaons apply for acve IR LEDs on the CinePuck:
ď‚· 850 nm IR spectrum
ď‚· 8 LEDs
 Illuminaons synchronized with camera exposures
 Illuminaon angle: ±60°
Basic Specs
Spec
Descripon
CinePuck Body
Dimensions
Dimensions
 Width: 153.30mm (~6.04”)
 Length: 127.68mm(~5.03”)
 Height: 25.70(~1.01”)
Weight
ď‚·
11.58 oz (~328.29g)
Aachment
ď‚·
-
Style An
-
Twist Mount w/ 3/8"
-
16 threads
ď‚· x6 Standard Tripod Mounts w/ 1/4"-20 threads
Baery
2200mAh Lithium polymer baery
Charging
ď‚· 5V micro USB Type C
 ~7.5 hours* of baery life (*Baery life varies depending on frame rate and exposure
sengs)
ď‚· 5hrs zero to full charge
IMU
Dimensions
ď‚· Width: 15mm
Spec
Descripon
ď‚·
Length: 15mm
ď‚· Height: 5.720mm
Weight
ď‚· < 1.75g
Gyroscope
Dynamic Range
 500 +/- °/sec
BaseStaon Load Capacity
The number of devices with IMUs (such as CinePucks) that can aach to a BaseStaon is determined by the system
frame rate and the divisor applied to the BaseStaon. The table below shows the IMU maximum for common frame
rates with a divisor rate of 1, 2, and in some cases 3.
FrameRate
Divisor Rate 1
Divisor Rate 2
Divisor Rate 3
60
26
54
83
70
22
47
71
80
19
39
62
90
16
36
54
100
14
32
49
110
13
29
44
120
11
26
40
130
10
24
140
9
22
34
150
9
20
160
8
19
30
170
7
17
180
7
16
26
190
6
15
200
6
14
23
210
5
14
220
5
13
21
230
5
12
240
4
11
18
250
4
11
As noted, the table does not include all possible frame rate and divisor combinaons. If you are familiar with using Tera
Term or , you can determine the maximum number of IMUs for any specic frame rate and divisor combinaon
PuTTy
not shown on the table.
1. Use PuTTy to change the divisor rate on the BaseStaon.
2. Connect an IMU puck to PuTTy.
3. Aempt to set the ID of the puck to an unrealiscally high value. This triggers a warning that includes the
current number of slots available for the given frame rate.
4. Set the IMU puck ID to the highest available slot for the frame rate and conrm that it appears in Move.
5. BaseStations have 16 radio frequency (RF) channels available for use (11-26).
When adding more than one BaseStation to a system, the IMU count is simply the
maximum number of IMUs multiplied by the number of BaseStations (up to 16). For
example, in a system with 4 BaseStations running at 90Hz and a divisor rate of 3,
the number of allowable IMUs would be 216 (54*4=216).
6. CinePuck in Motive
7. To use a CinePuck in Motive, it must first be an asset. Please see the Builder pane
page for instructions on creating a rigid body asset IMU Sensor , and the page
Fusion for instruction on pairing the IMU.
8. Use the feature to automatically pair and align a CinePuck to its Auto-Configure
associated IMU. When auto-configured, Motive changes the name of the Rigid Body
and its associated marker constraints to CinePuck_G###.
9. To use a different naming convention, use the Manual Pair option instead.
10. Once the CinePuck rigid body is created, it will be available in the Assets
pane. Select the CinePuck either in the Assets pane or the 3D Viewport to display
its properties in the Properties pane.
11.
12. CinePuck in the Assets pane (left) and the Properties pane (right).
13. When connected to the OptiTrack system, the properties for the CinePuck
IMU and its associated BaseStation are shown in the Devices Pane. Please see the
Devices Pane page for more details.

Product specificaties

Merk: OptiTrack
Categorie: Niet gecategoriseerd
Model: CinePuck

Heb je hulp nodig?

Als je hulp nodig hebt met OptiTrack CinePuck stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd OptiTrack

OptiTrack

OptiTrack CinePuck Handleiding

30 Januari 2025

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Sonifex

Sonifex DHY-04S Handleiding

30 Januari 2025
Wimberley

Wimberley AP-612 Handleiding

30 Januari 2025
Sonifex

Sonifex Redbox RB-PD2 Handleiding

30 Januari 2025
SmallRig

SmallRig FilMov 67mm Handleiding

30 Januari 2025
Scanstrut

Scanstrut RLS-508-404 Handleiding

30 Januari 2025
Scanstrut

Scanstrut PTM-R2-SL Handleiding

30 Januari 2025
JLCooper

JLCooper SloMo Elite-C Handleiding

30 Januari 2025
Scanstrut

Scanstrut SPT1001 Handleiding

30 Januari 2025
SmallRig

SmallRig FilMov 17mm Handleiding

30 Januari 2025
Scanstrut

Scanstrut RL-RM Handleiding

30 Januari 2025