Onkyo VC-FLX1 Handleiding

Onkyo Speaker VC-FLX1

Lees hieronder de 📖 handleiding in het Nederlandse voor Onkyo VC-FLX1 (25 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/25

Voice Control Speaker with Camera VC-FLX

VC-FLX1

Instruction Manual Cautions and Disclaimers .......................................2

Safety Precautions .....................................................2

Disclaimers, Trademarks, etc. ...................................4

Parts Name ...............................................................6

Light Ring Status .......................................................8

Preparation and Setup ............................................9

Initial Setup and Pairing ........................................10

Items on Home Screen ..........................................13

Setting Manager Screen ..........................................14

Sensors Manager screen .........................................15

Rules Manager Screen ............................................18

History Screen .........................................................19

Using the unit .........................................................20

Enjoying Audio Source ............................................20

Live Video ................................................................21

Amazon Alexa ..........................................................22

Sensors on the unit ..................................................22

Troubleshooting ....................................................23

Specifications ........................................................24

Cautions and Disclaimers

Safety Precautions

The rating plate is on the bottom of the product.

WARNING:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER. NO USER SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE

OF PLUG TO WIDE SLOT OF AC POWER OUTLET, THEN

FULLY INSERT.

Warnings:

Handling the cord on this product will expose you to lead, a

chemical known to the State of California to cause cancer

and birth defects or other reproductive harm. Wash hands

after handling.

Do not expose the product to liquids. Do not place items

containing liquid on top of the product, such as glasses or

vases.

Keep the product away from direct sunlight, extreme cold, or

heat sources. Exposure to extreme temperatures may

damage or reduce the life of the product.

IMPORTANT SAFETY INSTRUCTIONS

1. Do not use this product near water.

2. Clean only with a dry cloth.

3. Do not block any of the ventilation openings.

4. Do not install near any heat sources such as radiators,

heat registers, stoves, or other devices that produce heat.

5. Protect the AC adapter and cord from being on damaged

or pinched.

6. Only use approved attachments/ and accessories.

7. Unplug this product during lightning storms.

8. Refer all servicing to qualified service personnel.

Servicing is required when the product has been damaged

in any way, including when the power cord or plug is

damaged, liquid has been spilled or objects have fallen

into the product, the product has been exposed to rain or

moisture, the product does not operate normally, or the

product has been dropped.

9. Never pull on a power cord/cable to remove a plug from a

socket. Always grasp the plug directly. Failure to follow this

instruction may damage the cord/cable, and/or result in a

fire or electric shock, possibly resulting in serious injury.

Always confirm that the power plug (and extension cable

plug if used) has been fully inserted into the socket, to

ensure a secure electrical connection. Failure to do so

may result in a fire or electric shock, possibly resulting in

serious injury. Be careful if you use a multiple connector.

An overload on one socket could cause a fire or electric

shock, possibly resulting in serious injury.

Critical Applications

This product is not designed for any "critical applications."

"Critical applications" means life support systems, medical

applications, connections to implanted medical devices,

commercial transportation, nuclear facilities or systems or

any other applications where product failure could lead to

injury to persons or loss of life or catastrophic property

damage.

ACCORDINGLY, ONKYO Corporation, ITS AFFILIATES

AND SUPPLIERS DISCLAIM ANY AND ALL LIABILITY

ARISING OUT OF THE USE OF THE PRODUCT IN ANY

CRITICAL APPLICATIONS. IF YOU USE THE PRODUCT

IN A CRITICAL APPLICATION, YOU, AND NOT ONKYO

Corporation, ASSUME FULL RESPONSIBILITY FOR

SUCH USE.

ADDITIONAL SAFETY INSTRUCTIONS

1. If the product should emit smoke or an unusual odor,

immediately disconnect the AC adapter from the wall outlet

and obtain service from an authorized service provider.

USA

Federal Communications Commission Statement

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2)

This device must accept any interference received, including

interference that may cause undesired operation

Interference

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one of the

following measures:

0Reorient or relocate the receiving antenna.

0Increase the separation between the equipment and

receiver.

0Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

0Consult the dealer or an experienced radio/TV technician

for help.

0Bluetooth® and Wireless LAN devices operate within the

same radio frequency range and may interfere with one

another. If you use Bluetooth and Wireless LAN devices

simultaneously, you may occasionally experience a less

than optimal network performance or even lose your

network connection. If you should experience any such

problem, immediately turn off your Bluetooth or Wireless

LAN device.

Wireless Radio

Radio Frequency Interference Requirements

This device is restricted to indoor use due to its operation in

the 5.15 GHz to 5.25 GHz frequency range. FCC requires

this product to be used indoors for frequency range 5.15 GHz

to 5.25 GHz to reduce the potential for harmful interference

to co-channel Mobile Satellite systems.

High power radars are allocated as primary users of the 5.25

GHz to 5.35 GHz and 5.65 GHz to 5.85 GHz bands. These

radar stations can cause interference with and/or damage

this device.

Important: Any changes or modifications not expressly

approved by the party responsible for compliance could void

the user’s authority to operate this equipment. This device

and its antenna(s) must not be co-located or operating in

conjunction with any other antenna or transmitter.

FCC Notice "Declaration of Conformity Information"

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of

the FCC rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, it may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or

more of the following measures:

0Reorient or relocate the receiving antenna.

0Increase the separation between the equipment and

receiver.

0Connect the equipment to an outlet on a circuit different

from that to which the receiver is connected.

0Consult the dealer or an experienced radio/TV technician

for help.

Changes or modifications made to this equipment not

expressly approved by ONKYO Corporation or parties

authorized by ONKYO Corporation could void the user's

authority to operate the equipment.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits

set forth for an uncontrolled environment.

This equipment should be installed and operated with

minimum distance 20cm between the radiator & your body.

Wireless LAN and Your Health

Wireless LAN products, like other radio devices, emit radio

frequency electromagnetic energy. The level of energy

emitted by Wireless LAN devices however is far much less

than the electromagnetic energy emitted by wireless devices

such as mobile phones.

Because Wireless LAN products operate within the

guidelines found in radio frequency safety standards and

recommendations, ONKYO Corporation believes Wireless

LAN is safe for use by consumers. These standards and

recommendations reflect the consensus of the scientific

community and result from deliberations of panels and

committees of scientists who continually review and interpret

the extensive research literature.

In some situations or environments, the use of Wireless LAN

may be restricted by the proprietor of the building or

responsible representatives of the organization if the risk of

interference to other devices or services is perceived or

identified as harmful.

If you are uncertain of the policy that applies on the use of

wireless devices in a specific organization or environment,

you are encouraged to ask for authorization to use the

Wireless LAN device prior to turning on the equipment.

Bluetooth® Wireless Technology and Your Health

Products with Bluetooth

® wireless technology, like other radio

devices, emit radio frequency electromagnetic energy. The

level of energy emitted by devices with Bluetooth wireless

technology however is much less than the electromagnetic

energy emitted by wireless devices such as mobile phones.

Because products with Bluetooth wireless technology

operate within the guidelines found in radio frequency safety

standards and recommendations, ONKYO Corporation

believes Bluetooth wireless technology is safe for use by

consumers.

These standards and recommendations reflect the

consensus of the scientific community and result from

deliberations of panels and committees of scientists who

continually review and interpret the extensive research

literature.

In some situations or environments, the use of Bluetooth

wireless technology may be restricted by the proprietor of the

building or responsible representatives of the organization if

the risk of interference to other devices or services is

perceived or identified as harmful.

If you are uncertain of the policy that applies on the use of

wireless devices in a specific organization or environment,

you are encouraged to ask for authorization to use the device

with Bluetooth wireless technology prior to turning on the

equipment.

PRECAUTIONS

Notes on handling

0When shipping the product, the original shipping carton

and packing materials come in handy. For maximum

protection, repack the product as it was originally packed

at the factory. Take care not to give it a shock or shake

when carrying.

0Do not use volatile liquids, such as insect spray, near the

product. Do not leave rubber or plastic products in contact

with this product for a long time. They will leave marks on

the finish.

0The product may become warm after a long period of use.

This is not a malfunction.

0When the product is not in use for a long period,

disconnect the power.

0If you do not use the product for a long period, the product

may not function properly. Turn on and use the product

occasionally.

Notes on locating

0Place the product on a level surface. Do not use it on a

shaky or unstable surface such as a wobbling table or

inclined stand.

0When you place this product near a TV, radio, or VCR, the

playback picture may become poor and the sound may be

distorted. In this case, place the product away from the TV,

radio, or VCR.

0Do not use this product in places which are extremely hot,

cold, dusty or humid.

0Do not restrict the air flow of this product by placing

somewhere with poor air flow, by covering it with a cloth, or

by placing it on bedding or carpeting.

Product specificaties

Merk:	Onkyo
Categorie:	Speaker
Model:	VC-FLX1

Heb je hulp nodig?

Als je hulp nodig hebt met Onkyo VC-FLX1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Speaker Onkyo

Onkyo HT-S3405 Handleiding

22 Juni 2023

Onkyo HTP-2S Handleiding

27 Mei 2023

Onkyo SKS-4700 Handleiding

23 Mei 2023

Onkyo SKS-3600 Handleiding

5 Mei 2023

Onkyo D-407F Handleiding

2 Mei 2023

Onkyo D-309H Handleiding

1 Mei 2023

Onkyo SKS-HT230 Handleiding

16 April 2023

Onkyo SKR-L500 Handleiding

11 April 2023

Onkyo SKS-101 Handleiding

10 April 2023

Onkyo Smart Speaker G3 VC-GX30 Handleiding

4 April 2023

Handleiding Speaker

Nieuwste handleidingen voor Speaker

Braun LE03 Handleiding

23 November 2024

HK Audio L5-112X Handleiding

23 November 2024

Samson Rubicon R8a Handleiding

22 November 2024

Sony SS-SPG01 Handleiding

22 November 2024

Sony SS-MB200H Handleiding

22 November 2024

Sony SS-MB300H Handleiding

22 November 2024

JBL Studio 690 Handleiding

22 November 2024

JBL Studio 680 Handleiding

22 November 2024

Kramer Tavor 8-Sub Handleiding

21 November 2024

Kramer Galil 6-AW Handleiding

21 November 2024