Onkyo SKS-4800 Handleiding

Onkyo Speaker SKS-4800

Lees hieronder de 📖 handleiding in het Nederlandse voor Onkyo SKS-4800 (31 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/31
E
n
Speaker System
SKS-4800
Instruction Manual
Thank you for your purchase of the Onkyo speaker
system.
Please read this manual thoroughly before using it.
Following the instructions in this manual will
enable you to obtain optimum performance and
listening enjoyment from your new speaker
system.
Please retain this manual for future reference.
• The speaker cabinet is made of wood and is
therefore sensitive to extreme temperatures and
humidity. Avoid placing the speaker systems in
locations subjected to direct sunlight, or in smoky
or in humid places, such as near an air conditioner,
humidifier, bathroom, or kitchen. Doing so may
result in damage to the speaker.
• Place the unit on a rigid, level surface. Placing it
on a slanted surface or weak base not only may
cause the unit to fall, but also results in decreased
sound quality.
• Be sure to turn off your amplifier before
connecting the speaker system. Connecting them
with the amplifier’s power on may result in
damage to the amplifier or the speaker system.
• Keep water or other liquids away from the unit. If
water is spilled into the unit, not only the unit but
also the speakers themselves may be damaged.
• This speaker system can handle the specified
input power when it is used for ordinary music
reproduction. If the following abnormal signals
are fed to the speaker, however, an overcurrent
may flow in the internal
circuits, ca
using burning
or breakage of the wires even if the input power is
below the specified rating.
1. Noise produced when FM station is not tuned in
2. Sound produced when fast-forwarding cassette
tape deck
3. High-frequency sound generated by an
oscillator, an electronic musical instrument, etc.
4. Oscillating amplifier signals
5. Special test signals produced by audio checking
CD, etc.
6. Sound produced when connecting or
disconnecting audio connection cables (Always
turn off the amplifier’s power before connecting
or disconnecting cables.)
7. Howling when a microphone is used
• Do not place magnetic objects such as
screwdrivers and iron parts near the tweeter since
they use speakers with strong magnets. Otherwise,
the objects may be attracted, causing injury or
damaging the diaphragm.
Before using this unit
Precaution on use
2
Center speaker system SKC-4800 × 1
Surround speaker system SKR-4800 × 2
The two speakers are identical, so it doesn’t matter
which one you use on the left or right.
• Turn the sound volume to the minimum and
disconnect the power cord from the amplifier before
connecting the speaker cables.
• The nominal impedance of this speaker system is 6 Ω.
Use only amplifiers capable of handling this
impedance.
• Use the supplied speaker cables to connect between
speaker’s input terminals and the amplifier’s speaker
terminals as illustrated on the below.
• Use the red line wires to connect the positive (+)
terminals.
•
Connect the speaker cables
securely to the terminals, with the
core wires twisted properly. In this
case, make sure that the core wires
do not touch each other. Note that
a short circuit in core wires may
result in damage to the amplifier.
Connecting to AV amplifier
Model name
Connections
+–
L
R
SURROUND BACK
SPEAKER SURROUND
SPEAKERS FRONT
SPEAKERS A CENTER
SPEAKER
+–
+– +–
+–
1. Strip the insulation of speaker cables,
and twist the core wires tightly.
2. While pressing the lever, insert the
wire into the hole, and then release
the lever.
3. Make sure that the terminals are
gripping the core wires, not the
insulation.
SKF-4800
Front right speaker
SKF-4800
Front left speaker
SKC-4800
Center speaker
AV amplifier
SKR-4800
Surround
right
speaker
SKR-4800
Surround left
speaker
Red line
Red line
3
Before turning on the amplifier’s power switch:
• Make sure that the positive (+) and negative (–)
speaker cables do not contact each other. Otherwise, a
short-circuit may occur, causing damage to the
amplifier.
• Be sure to connect the speaker cables with correct
polarity (connect the speaker’s positive (+) and
negative (–) binding posts with the amplifier’s
corresponding speaker terminals). Reversed polarity
results in impaired bass-range reproduction, causing
mislocalization of the sound image. Also, be sure to
connect the Right and Left speakers with the
amplifier’s corresponding speaker terminals.
• Pull lightly on the speaker cables to ensure that they
are connected firmly.
For better-quality sound, observe the following
precautions when you install the speaker system:
• Placing the speaker system on several small-diameter
supports generally results in better sound than placing
it directly on a wide installation surface. Also note
that high quality bass cannot be obtained if the
speaker system is unstably positioned. Always use
the spacers or thin metal discs (such as coins) to seat
the speaker stably.
• Place the Right and Left surround speakers in similar
conditions. If they are placed in extremely different
conditions, left right channel balance will be
adversely affected.
SKC-4800 Center Speaker
Place the SKC-4800 as close as possible to your TV set,
for example, above or below the TV set. Be sure to set
the SKC-4800 firmly on the TV set or other equipment
so that it cannot slip and fall. This is especially
important if you have small children. If the SKC-4800
is to be placed on a TV set, be sure that:
• The supporting area of the TV set is larger than that
of the SKC-4800.
• The TV set’s support surface is flat and level.
• The TV set is not placed on an unstable support.
SKR-4800 Surround Speaker
If the speakers are to be wall-mounted, make sure that
the walls are strong enough to support the speaker’s
weight. The weight that mounting screws can support
varies greatly depending on the wall material and the
position of the reinforcing ribs embedded in the wall.
Use the thickest and longest possible mounting screws
with mounting screw head diameters less than 8.5 mm
and shank diameters less than 3.5 mm (consult with
your interior designer or contractor).
Using spacers
Affix four of the supplied spacers to the SKC-4800/
SKR-4800.
In general, Braun tubes used for color TV sets, etc. are
extremely sensitive and can be affected even by the
magnetism of the earth. If a speaker system is used near
them, therefore, discoloration or distortion of pictures
will occur. Refer to the following precautions when you
use the speaker with TV sets.
For magnetic shielded speaker (SKC-4800):
The speaker is shielded to prevent discoloration. In
some situations, however, discoloration may still be an
issue, in which case you should turn off your TV sets,
wait 15 to 30 minutes, and then turn it back on again.
This normally activates the degaussing function, which
neutralizes the magnetic field, thereby removing any
discoloration effects. If discoloration problems persist,
try moving the speaker away from your TV sets.
For non-magnetic shielded speakers (SKR-4800):
Try moving the speakers away from your TV sets. If
discoloration should occur, turn off your TV sets, wait
15 to 30 minutes, and then turn it back on again. This
normally activates the degaussing function, which
neutralizes the magnetic field, thereby removing any
discoloration effects.
Your Onkyo speakers are finished with a very high
quality polymer laminate covering that serves to protect
the wood speaker cabinet.
Wipe the cabinet periodically with a dry, silicon-
embedded or plain soft cloth.
The covering may be cleaned with a soft cloth
moistened with water and a mild soap. Avoid the use of
furniture polishes or harsh cleansers. Use a soft brush or
hand vacuum cleaner to remove dust and lint from the
grille material.
Placement
Bottom of the
SKR-4800
Mounting on a wall
Wall bracket
Spacer
Spacer
Bottom of the
SKC-4800
Use with a TV set
Speaker care

Product specificaties

Merk: Onkyo
Categorie: Speaker
Model: SKS-4800

Heb je hulp nodig?

Als je hulp nodig hebt met Onkyo SKS-4800 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Speaker Onkyo

Onkyo

Onkyo HT-S3405 Handleiding

22 Juni 2023
Onkyo

Onkyo HTP-2S Handleiding

27 Mei 2023
Onkyo

Onkyo SKS-4700 Handleiding

23 Mei 2023
Onkyo

Onkyo SKS-3600 Handleiding

5 Mei 2023
Onkyo

Onkyo D-407F Handleiding

2 Mei 2023
Onkyo

Onkyo D-309H Handleiding

1 Mei 2023
Onkyo

Onkyo SKS-HT230 Handleiding

16 April 2023
Onkyo

Onkyo SKR-L500 Handleiding

11 April 2023
Onkyo

Onkyo SKS-101 Handleiding

10 April 2023
Onkyo

Onkyo Smart Speaker G3 VC-GX30 Handleiding

4 April 2023

Handleiding Speaker

Nieuwste handleidingen voor Speaker

Braun

Braun LE03 Handleiding

23 November 2024
HK Audio

HK Audio L5-112X Handleiding

23 November 2024
Samson

Samson Rubicon R8a Handleiding

22 November 2024
Sony

Sony SS-SPG01 Handleiding

22 November 2024
Sony

Sony SS-MB200H Handleiding

22 November 2024
Sony

Sony SS-MB300H Handleiding

22 November 2024
JBL

JBL Studio 690 Handleiding

22 November 2024
JBL

JBL Studio 680 Handleiding

22 November 2024
Kramer

Kramer Tavor 8-Sub Handleiding

21 November 2024
Kramer

Kramer Galil 6-AW Handleiding

21 November 2024