Onkyo SKR-3600 Handleiding

Onkyo Speaker SKR-3600

Lees hieronder de šŸ“– handleiding in het Nederlandse voor Onkyo SKR-3600 (20 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
F Er s tI De lN SvEnCt
Speaker System
SKR-3600
Instruction Manual
Manuel dā€™instructions
Manual de instrucciones
Manuale di istruzioni
Bedienungsanleitung
Gebruiksaanwijzing
Bruksanvisning
ä½æē”Øę‰‹å†Š
English
FranƧais
EspaƱol
Italiano
Deutsch
Nederland
Svenska
äø­äø­
äø­äø­ ꖇꖇ
ꖇꖇ
Thank you for your purchase of the Onkyo speaker
system.
Please read this manual thoroughly before using it.
Following the instructions in this manual will
enable you to obtain optimum performance and lis-
tening enjoyment from your new speaker system.
Please retain this manual for future reference.
SKR-3600 (surround back speaker)
Ɨ 1
Speaker cord
Ɨ 1 (brown: 9 m)
Bracket
Ɨ 1
Screw
Ɨ 1
Cork spacer
Ɨ
4
SKR-3600 (Surround back speaker)
When using as a surround back speaker.
It is very important to place your speaker properly to
obtain the optimum sound space for your listening plea-
sure.
The surround back speaker is required for enjoying
Dolby Digital EX or DTS-ES audio. The surround back
speaker will also improve the quality of sound effects
for far more realistic acoustics.
Place the speaker so that its height is 1 meter higher
than that of the listenerā€™s ears.
The speaker cabinet is made of wood and sensitive to
extreme temperatures and humidity. Avoid placing the
speaker system in locations subjected to direct sunlight
or in humid places such as near an air conditioner, bath-
room, or kitchen.
Your Onkyo speaker is ļ¬nished with a very high quality
polymer laminate covering that serves to protect the
wood speaker cabinet.
The covering may be cleaned with a soft cloth moist-
ened with water and a mild soap. Avoid the use of furni-
ture polishes or harsh cleansers.
Use a soft brush or hand vacuum cleaner to remove dust
and lint from the grille material.
We recommend that you use the included cork spacers
so you can enjoy superior sound. The cork spacers also
prevent the speaker from slipping.
Mounting on a wall
Wall-mount the speaker upside down. Layer two spac-
ers and attach them to two locations. The plaques rotate
so that you can position the speaker upside down.
Attaching the bracket:
Use the included screw to attach the bracket to the back
of the speaker.
Caution:
ā€¢ Make sure that the walls are rigid enough for support-
ing the speakerā€™s weight.
ā€¢ The weight a mounting screw can support varies
greatly depending on the wall material and the posi-
tion of the reinforcing ribs embedded in the wall. Use
the thickest and longest possible mounting screw
whose head diameter is less than 10 mm and shank
diameter is less than 4 mm (consult with your
installer).
The surround back speaker bottom and rear are
equipped with screw holes so that you can attach com-
mercially-available stands or mounting ļ¬xtures for a
variety of mounting options. (Two M5 screw holes, 60
mm pitch on the bottom and one M5 screw hole on the
rear.)
Note:
ā€¢ When attaching
an accessory
item to a speaker,
be careful of the
length of the
screw used. Use
only screw that provide the required strength with a
screw length between 7 and 12 mm.
Supplied accessories
Placement
Speaker care
Using the included cork spacers and
installation bracket
Installation using commercially-
available stands and ļ¬xtures
Cork spacer
Bottom
Cork spacer
Bracket
Screw
M5 screw
5 mm
7 ~ 12 mm
En-1
ā€¢ Be sure to turn off your ampliļ¬er before connecting
the speaker system. Connecting it while the ampliļ¬er
is on may result in damage to the ampliļ¬er or the
speaker system.
ā€¢ The nominal impedance of this speaker system is 8
ā„¦
.
Use only ampliļ¬ers capable of handling this imped-
ance.
ā€¢ Use the supplied speaker cable to connect between
the speakerā€™s input terminals and the ampliļ¬erā€™s
speaker terminals as illustrated below.
ā€¢ Be sure to connect the Surround Back speaker with
the ampliļ¬erā€™s corresponding speaker terminals.
Also, be sure that you are connecting the speakerā€™s
positive (+) and negative (ā€“) input terminals with the
ampliļ¬erā€™s corresponding positive and negative
speaker terminals. Otherwise, undesirable sound ļ¬eld
or impaired bass-range reproduction will result.
ā€¢ Before turning on the ampliļ¬erā€™s power switch, pull
lightly on the speaker cable to ensure that they are
connected securely.
ā€¢ To prevent damage to cir-
cuitry, never short-circuit the
positive (+) and negative (ā€“)
speaker wire.
ā€¢ This speaker system can handle the speciļ¬ed input
power when it is used for ordinary music reproduc-
tion. If the following abnormal signals are fed to the
speaker, however, an overcurrent may ļ¬‚ow in the
internal circuits, causing burning or breakage of the
wires even if the input power is below the speciļ¬ed
rating.
1. Noise produced when FM station is not tuned in.
2. Sound produced when fast-forwarding cassette
tape deck.
3. High-frequency sound generated by an oscillator,
an electronic musical instruments, etc.
4. Oscillating ampliļ¬er signals.
5. Special test signals produced by audio checking
CD, etc.
6. Sound produced when connecting or disconnect-
ing audio connection cables. (Always turn off the
ampliļ¬erā€™s power before connecting or discon-
necting cables.)
7. Howling when a microphone is used.
ā€¢ Do not place magnetic objects such as screwdrivers
and iron parts near the speaker system since they use
speaker with strong magnets. Otherwise, the objects
may be attracted, causing injury or damaging the dia-
phragm.
Type: 2-way bass reļ¬‚ex
Impedance: 8
ā„¦
Maximum input power: 100 W
Output sound pressure level:
81 dB
Frequency response: 60 Hz - 35 kHz
Crossover frequency: 6000 Hz
Cabinet capacity: 1.2 l
Speaker (woofer): 8 cm cone
Speaker (tweeter): 2.5 cm balanced dome
Dimensions:
104 (W)
Ɨ
169 (H)
Ɨ
127 (D) mm
(Overall dimensions)
Weight: 1.1 kg
Speciļ¬cations and appearance are subject to change for
improvement without prior notice.
In catalogs and on packaging, the letter added to the end
of the product name indicates the color of the SKR-
3600. Speciļ¬cations and operation are the same regard-
less of color.
Connections
SURROUND BACK
SPEAKER
FRONT
SPEAKERS SURROUND
SPEAKERS CENTER
SPEAKER
R
L
R
L
A B
R
L
SKF-3600
Front right
speaker
SKF-3600
Front left
speaker
SKC-3600
Center speaker
SKM-3600
Surround right
speaker
SKM-3600
Surround left
speaker
Brown
1. Strip the insulation of speaker
cables, and twist the core wires
tightly.
2. While pressing the lever, insert
the wire into the hole, and then
release the lever.
3. Make sure that the terminals
are gripping the core wires, not
the insulation.
SKR-3600
Surround back
speaker
Precaution on use
Speciļ¬cations
En-
2


Product specificaties

Merk: Onkyo
Categorie: Speaker
Model: SKR-3600

Heb je hulp nodig?

Als je hulp nodig hebt met Onkyo SKR-3600 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Onkyo

Handleiding Speaker

Nieuwste handleidingen voor Speaker