Onkyo SKF-3600 Handleiding

Onkyo Speaker SKF-3600

Lees hieronder de 📖 handleiding in het Nederlandse voor Onkyo SKF-3600 (4 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Speaker System

SKF-3600

Instruction Manual

Thank you for your purchase of the Onkyo speaker

system.

Please read this manual thoroughly before using it.

Following the instructions in this manual will enable

you to obtain optimum performance and listening

enjoyment from your new speaker system.

Please retain this manual for future reference.

Contents

Supplied accessories 2

Using the included

speaker bases 2

Placement 2

Connections 3

Precaution on use 3

Speaker care 4

Use with a TV set or

computer 4

Speciﬁcations 4

SKF-3600 (front speaker)

× 2

Speaker cord

× 2 (red, white: 3.5m)

Speaker base

× 2

Screws

× 6

Front left and right speakers

Output overall sound. They play the most important role

in a home theater system, by creating basic sound

images and ﬁelds.

Place the front speakers in front of the listener so that

they point to the listener’s ears in the listening position

for music and movies. Ideal speaker placement is so that

they are located symmetrically.

The speaker cabinet is made of wood and sensitive to

extreme temperatures and humidity. Avoid placing the

speaker system in locations subjected to direct sunlight

or in humid places such as near an air conditioner, bath-

room, or kitchen.

Before making speaker connection, attach the supplied

speaker bases to the SKF-3600.

1. Turn the speaker upside down.

2. Match the screw halls on the speaker base to those

on the speaker, and ﬁx the base to the speaker using

screws.

SAFETY PRECAUTIONS:

• When attaching the speaker bases, work with them on

a ﬂat, level, and solid ﬂoor.

• After attached the speaker bases, verify that the

speakers stand upright and stably.

Using the speaker cable hook

The supplied speaker base has a speaker cable hook. It

is recommended that you hook the cables on the hook to

avoid cable congestion.

Supplied accessories

Placement

Using the included speaker bases

• Be sure to turn off your ampliﬁer before connecting

the speaker system. Connecting it while the ampliﬁer

is on may result in damage to the ampliﬁer or the

speaker system.

• The nominal impedance of this speaker system is 8

Ω

Use only ampliﬁers capable of handling this imped-

ance.

• Use the supplied speaker cables to connect between

the speaker’s input terminals and the ampliﬁer’s

speaker terminals as illustrated below.

• Be sure to connect the Right and Left speakers with

the ampliﬁer’s corresponding speaker terminals.

Also, be sure that you are connecting the speaker’s

positive (+) and negative (–) input terminals with the

ampliﬁer’s corresponding positive and negative

speaker terminals. Otherwise, undesirable sound ﬁeld

or impaired bass-range reproduction will result.

• Before turning on the ampliﬁer’s power switch, pull

lightly on the speaker cables to ensure that they are

connected securely.

• To prevent damage to circuitry,

never short-circuit the positive

(+) and negative (–) speaker

wire.

• This speaker system can handle the speciﬁed input

power when it is used for ordinary music reproduc-

tion. If the following abnormal signals are fed to the

speaker, however, an overcurrent may ﬂow in the

internal circuits, causing burning or breakage of the

wires even if the input power is below the speciﬁed

rating.

1. Noise produced when FM station is not tuned in

2. Sound produced when fast-forwarding cassette

tape deck

3. High-frequency sound generated by an oscillator,

an electronic musical instruments, etc.

4. Oscillating ampliﬁer signals

5. Special test signals produced by audio checking

CD, etc.

6. Sound produced when connecting or disconnect-

ing audio connection cables (Always turn off the

ampliﬁer’s power before connecting or discon-

necting cables.)

7. Howling when a microphone is used

• Do not place magnetic objects such as screwdrivers

and iron parts near the speaker system since they use

speakers with strong magnets. Otherwise, the objects

may be attracted, causing injury or damaging the dia-

phragm.

Connections

SURRO UND BACK

SPEAKER

FRONT

SPEAKERS SURROUND

SPEAKERS CENTER

SPEAKER

A B

SKF-3600

Front right

speaker

SKF-3600

Front left

speaker

SKC-3600

Center speaker

SKM-3600

Surround right

speaker

SKM-3600

Surround left

speaker

Red White

1. Strip the insulation of speaker

cables, and twist the core wires

tightly.

2. While pressing the lever, insert

the wire into the hole, and then

release the lever.

3. Make sure that the terminals

are gripping the core wires, not

the insulation.

Both SKC-3600 and SKM-3600 come with SKS-3600.

Precaution on use

Product specificaties

Merk:	Onkyo
Categorie:	Speaker
Model:	SKF-3600

Heb je hulp nodig?

Als je hulp nodig hebt met Onkyo SKF-3600 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Speaker Onkyo

Onkyo HT-S3405 Handleiding

22 Juni 2023

Onkyo HTP-2S Handleiding

27 Mei 2023

Onkyo SKS-4700 Handleiding

23 Mei 2023

Onkyo SKS-3600 Handleiding

5 Mei 2023

Onkyo D-407F Handleiding

2 Mei 2023

Onkyo D-309H Handleiding

1 Mei 2023

Onkyo SKS-HT230 Handleiding

16 April 2023

Onkyo SKR-L500 Handleiding

11 April 2023

Onkyo SKS-101 Handleiding

10 April 2023

Onkyo Smart Speaker G3 VC-GX30 Handleiding

4 April 2023

Handleiding Speaker

Nieuwste handleidingen voor Speaker

Braun LE03 Handleiding

23 November 2024

HK Audio L5-112X Handleiding

23 November 2024

Samson Rubicon R8a Handleiding

22 November 2024

Sony SS-SPG01 Handleiding

22 November 2024

Sony SS-MB200H Handleiding

22 November 2024

Sony SS-MB300H Handleiding

22 November 2024

JBL Studio 690 Handleiding

22 November 2024

JBL Studio 680 Handleiding

22 November 2024

Kramer Tavor 8-Sub Handleiding

21 November 2024

Kramer Galil 6-AW Handleiding

21 November 2024