Omnitron Systems iConverter Handleiding

Omnitron Systems Niet gecategoriseerd iConverter

Lees hieronder de 📖 handleiding in het Nederlandse voor Omnitron Systems iConverter (12 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 110 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/12
Page 1
iConverter®
2-Module Power Chassis
User Manual
38 Tesla, Irvine, CA 92618 USA
Phone: (949) 250-6510; Fax: (949) 250-6514
Page 2
Warning
The operating description in this Instruction Manual is for use by qualiîš¿ed personnel
only. To avoid electrical shock, do not perform any servicing of this module other than
that contained in the operating instructions, unless you are qualiîš¿ed and certiîš¿ed to do
so by Omnitron Systems Technology, Inc.
Caution
All user-required operations can be performed without opening the chassis. Never
attempt to open or remove the cover or tamper with the chassis. There are no user
replaceable or serviceable parts in this unit. Equipment is not intended to be installed
and used in a place (home, school, or public area) accessible to the general population.
Warranty
This product is warranted to the original purchaser against defects in material and
workmanship for a period of TWO YEARS from the date of shipment. A LIFETIME
warranty may be obtained by the original purchaser by REGISTERING this product with
Omnitron within 90 days from the date of shipment. TO REGISTER, COMPLETE AND
MAIL OR FAX THE ENCLOSED REGISTRATION FORM. Or you may register your
product on the Internet at http://www.omnitron-systems.com. During the warranty period,
Omnitron will, at its option, repair or replace a product which is proven to be defective.
For warranty service, the product must be sent to an Omnitron designated facility, at
Buyer’s expense. Omnitron will pay the shipping charge to return the product to Buyer’s
designated US address using Omnitron’s standard shipping method.
Limitation of Warranty
The foregoing warranty shall not apply to defects resulting from improper or inadequate
use and/or maintenance of the equipment by Buyer, Buyer-supplied equipment, Buyer-
supplied interfacing, unauthorized modiîš¿cations or tampering with equipment (including
removal of equipment cover by personnel not speciîš¿cally authorized and certiîš¿ed by
Omnitron), or misuse, or operating outside the environmental speciîš¿cation of the product
(including but not limited to voltage, ambient temperature, radiation, unusual dust,
etc.), or improper site preparation or maintenance. No other warranty is expressed or
implied. Omnitron speciîš¿cally disclaims the implied warranties of merchantability and
îš¿tness for any particular purpose.
Exclusive Remedies
The remedies provided herein are the Buyer’s sole and exclusive remedies. Omnitron
shall not be liable for any direct, indirect, special, incidental, or consequential damages,
whether based on contract, tort, or any legal theory.
Page 3
iConverter
2-Module Power Chassis User Manual
1. 0 GENERAL DESCRIPTION
The iConverter 2-Module Power Chassis is powered by a single internal universal AC
or DC power supply and can accommodate up to two iConverter media converters. It is
ideal for enterprise Local Area Network (LAN) or Metropolitan Area Network (MAN)
applications where remote management and explicit demarcation between the service
provider’s equipment and customer’s equipment is required.
Fig. 1 2-Module Chassis (Shown without modules installed)
This User Manual describes the following models:
Configuration 2-Module AC
8.5 watts
2-Module AC
16.5 watts
2-Module DC
6.6 watts
2-Module DC
16.5 watts
2-Module Chassis 8230-0 8231-0 8235-0 8236-0
2-Module Chassis with
Dying Gasp Support 8230-1 8231-1 8235-1 8236-1
Wall-Mount Hardware Kit 8249-0 8249-0 8249-0 8249-0
Blank Module Panel 8090-0 8090-0 8090-0 8090-0
For wide temperature (-40 to 60º C), add a "W" to the end of the model number.
Consult factory for extended temperature (-40 to +75º C) models.
1.1 Dying Gasp Trap
The 8230-1, 8231-1, 8235-1 and 8236-1 chassis feature Dying Gasp Trap, which reports
loss of power input or chassis power supply failure. This feature requires an iConverter
management module be installed in the chassis. When power failure occurs, the chassis
reserves enough power to keep the installed modules running in order to send a îš¿nal
SNMP alert to the management software.

Product specificaties

Merk: Omnitron Systems
Categorie: Niet gecategoriseerd
Model: iConverter

Heb je hulp nodig?

Als je hulp nodig hebt met Omnitron Systems iConverter stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Omnitron Systems

Omnitron Systems

Omnitron Systems miConverter Handleiding

11 Maart 2024
Omnitron Systems

Omnitron Systems iConverter Handleiding

11 Maart 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

CyberPower

CyberPower BPS240V9A Handleiding

7 November 2024
CyberPower

CyberPower CPS3500PIE Handleiding

7 November 2024
Danby

Danby WUF170W Handleiding

7 November 2024
Danby

Danby DUF167A5WDD Handleiding

7 November 2024
Dual

Dual HS130 Handleiding

7 November 2024
Dual

Dual HS141 Handleiding

7 November 2024
Sonicware

Sonicware LIVEN Ambient Ø Handleiding

7 November 2024
Dual

Dual HS51 Handleiding

7 November 2024
Sonicware

Sonicware LIVEN BASS&BEATS Handleiding

7 November 2024
Dual

Dual HS140 Handleiding

7 November 2024