Olympia Protect 9571 Handleiding

Olympia Bewakingscamera Protect 9571

Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor Olympia Protect 9571 (2 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Protect 9571 Wireless Alarm System
G
QUICK
REFERENCE 1Page
Protect 9571 Wireless Alarm System
For detailed information, please refer to the operating manuals of the re๎€‚
spective components.
Scope of Delivery
Base unit 1
Power adapter plug 1
Remote control 1
Door/Window contacts 4
Wireless motion detector 2
Batteries 11x alkaline AAA
6x alkaline AA
1 x lithium CR2430 3 V
Assembly material Screws, dowels, adhesive tape
Operating instructions 1
Please check the contents of the package carefully. If anything is missing or
has been damaged during transport, DO NOT put the wireless alarm system
into operation! In such cases, contact your sales outlet, with your purchase
receipt to hand, or the OLYMPIA service centre.
NOTE: Keep the packaging in a safe place to protect
the equipment from damage should it need to
be dispatched in future.
Connecting the Base Unit
NOTE: In order to ensure unrestricted use of the base
unit, you need a SIM card from a mobile phone
provider. This is not included in the equipment
supplied.
Install a SIM card (not included with the equipment) in the base unit.
Insert three AAA alkaline batteries in the battery compartment (pay attention
to correct polarity).
Connect the base unit to the power socket.
Power socket
RESET
Power
adapter plug
DC 6V
RESET
Int Ext
Ext. Ant
SIM card
Antenna
switch
SOS (Emergency Call) Numbers
Enter the emergency call numbers in the base unit.
Configuration
Configure the alarm system according to your requirements.
Protect 9571 Wireless Alarm System
QUICK
REFERENCE
G
2Page
Putting the Remote Control into Operation
Remove the plastic strips from the battery on
the rear side.
Installing the Door/Window Contacts
Insert two batteries (AAA) in the battery compartment (pay attention to polar๎€‚
ity).
Fix the door/window contacts to all entrance doors and windows (examples).
Installing the Wireless Motion Detector
Install the holder for the wireless motion
detector at a suitable location.
WARNING: Risk of serious injuries through damaging
cables or lines!
During installation, pay attention to the possibil๎€‚
ity of cables running in the walls!
Insert three AA batteries in the battery
compartment (pay attention to correct polarity).
Install the wireless motion detector in the
holder.


Product specificaties

Merk: Olympia
Categorie: Bewakingscamera
Model: Protect 9571

Heb je hulp nodig?

Als je hulp nodig hebt met Olympia Protect 9571 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewakingscamera Olympia

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera