Novation Speedio Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Novation Speedio (13 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/13
CONTENTS
Contents
• •1
Introduction.................................................................
Main Features..............................................................
Connections And Software Installation....................
Connecting Up To Equipment......................................
Windows XP USB Driver Installation...........................
Mac OSX USB Driver Installation................................
The Windows Sound System.......................................
About ASIO..................................................................
The SpeedIO Control Panel.........................................
About Latency..............................................................
Main Features And Operation....................................
Front Panel Layout......................................................
Gain Boost Section......................................................
Phantom Power Section..............................................
Input Gain Section.......................................................
Line Out Level Control.................................................
USB Activity Section....................................................
Monitoring Section.......................................................
The Sample Rate And Power LEDs............................
Appendix......................................................................
Troubleshooting...........................................................
Approvals.....................................................................
2
2
3
3
4
4
5
5
5
6
7
7
8
8
9
9
10
10
11
12
12
13
SpeedIO v10.qxd 23/01/04 12:05 Page 1
INTRODUCTION
Main Features
• •2
Thank you for purchasing the Novation SpeedIO USB interface. The SpeedIO is a state of the art product -
it combines a 16 channel MIDI input and output interface along with a high quality audio interface.
When used with a computer running a MIDI / Audio sequencer package it will provide a superb, compact
recording setup with only a single USB cable required to connect both MIDI and Audio signals to the com-
puter.
Main Features
* Two Novation high precision, low noise high bandwidth audio pre-amplifiers with switchable
phantom power and over 70 dB headroom deliver a warm, clear signal typical of Novations
commitment to sonic excellence.
* Integrated USB low latency Audio and MIDI - Requires just a single USB connection a computer
(no PSU needed)
* Separate headphone and line output level controls allowing fast recording / monitoring
turnaround.
* Continuously variable Monitor control allows for direct hardware zero latency monitoring or low
latency software monitoring via the audio application.
* 44.1 / 48 Khz 16 / 24 bit simultaneous 2 channel Audio input and output operation with concur-
rent MIDI transmission and reception.
* Independent Gain controls with LED signal level and overload display. Each channel has 20dB
boost switches.
* Driver software included to run on Windows XP or Mac OSX Operating systems.
SpeedIO v10.qxd 23/01/04 12:05 Page 2
Connecting Up To Equipment
In order to record or replay Audio or MIDI data it will be necessary to connect the SpeedIO to a desktop or
laptop computer with the appropriate MIDI and Audio recording software installed.
The SpeedIO draws all its power requirements from the USB cable, and so no power adapter or batteries
are needed.
The SpeedIO requires approx 350mA of power to operate, dependent on various conditions. Switching on
the Phantom power or turning up the monitor volume in the headphones will add to the power consump-
tion. Although the USB specification dictates that all computers should be able to supply 500mA of current
which is ample, in practice some Laptops are not able to supply as much as this.
For use with Laptops supplying low levels of USB power, it may be necessary to connect the SpeedIO via
a powered USB hub.
USB Driver Software Installation
In order to use the SpeedIO, it must be connected to a computer system using the USB cable supplied.
The USB connector is located on the rear panel. Before it can communicate with the computer’s USB con-
nection port, a special piece of software known as a ‘USB driver’ must be installed.
The USB driver software converts information arriving at the computer’s USB port into the correct format
for use by the software Audio and MIDI interface used by the computers operating system. Most music
application software (Cubase, Logic, Sonar, Digital Performer etc) use this software Audio and MIDI inter-
face to communicate with external hardware devices such as the SpeedIO or MIDI controller keyboards
and sound modules.
The USB driver software is located on the supplied CD ROM and must be used with the Windows XP or
Mac OSX Operating System. If using a PC with a different operating systems such as Linux, Windows 95,
98SE or 2000 USB support will not be available.
CONNECTIONS AND SOFTWARE INSTALLATION
Connecting To Equipment - USB Driver Installation
• •3
Guitar Microphone
Powered Monitor Loudspeakers
Desktop ComputerLaptop Computer or
Sound Modules
SpeedIO v10.qxd 23/01/04 12:05 Page 3


Product specificaties

Merk: Novation
Categorie: Niet gecategoriseerd
Model: Speedio

Heb je hulp nodig?

Als je hulp nodig hebt met Novation Speedio stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Novation

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd