Novation nio 2|4 Handleiding

Novation Niet gecategoriseerd nio 2|4

Lees hieronder de 📖 handleiding in het Nederlandse voor Novation nio 2|4 (30 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 125 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/30

FA0163-01

INTRO

Welcome to the nio User Guide. This document should provide all the information you need to learn how to operate the

stylish USB interface. After detailing all of the controls and connections one by one, there are sections describing how

to record various sources, as well as defining output streams a and b and how to create monitor mixes. If you haven’t

already, you may want to also check out the printed Getting Started Guide in the box and the nio Tutorial movies on the

Novation website.

If you are having difficulty operating nio and cannot find the solution in this guide, go to the online answerbase at

www.novationmusic.com and type any relevant keywords into the search box.

WHAT’S IN THE BOX?

In the box with nio, you’ll find:

• Printed Getting Started Guide – to help you with the install process, plugging in and learning about basic operation

• Resources disc – contains the installer and full User Guide pdf

• USB cable – use this to connect to the computer after installation is complete

• Free software disc (e.g. Xcite+ pack) – contains any accompanying software and samples

GETTING STARTED

As outlined in the printed Getting Started Guide, the first stage of setting up nio is to run the installer. Separate PC

and Mac installers for nio can be found on the nio resources disc. Running the installer carries out the following actions:

• Installs the Audio driver

• Installs the MIDI driver

• Installs the FX Rack software

PC SETUP

1. Close all running programs

2. With nio disconnected from your computer, locate the nio PC installer on the resources disc and double-click to run it

3. You may be asked to restart your computer to complete installation

4. Once the installer has finished, or once your computer has restarted, connect nio to your computer. A balloon will appear

whilst Windows installs the device:

XP Vista

5. Wait for the balloon to tell you ‘Device driver software successfully installed’ (Win Vista) or ‘Your new device is installed

and ready to use’ (Win XP)

MAC SETUP

1. Close all running applications

2. With nio disconnected from your computer, locate the nio Mac installer on the resources disc and double-click to run it

3. You may be asked to restart your computer to complete installation

4. Once the installer has finished, or once your computer has restarted, connect nio to your computer

Nio can now be used as an Audio and MIDI device with your computer. To apply the nio FX to the audio inputs, launch the

nio FX Rack software from the Start menu (Windows) or your Applications folder (Mac).

FRONT PANEL CONTROLS

1. Sets the level of Headphones 1

2. Chooses the signal sent to Outputs 1 and 2. This can be ‘a’

(nio outputs 1/2 from the sequencer) or ‘mon’ (the monitor mix

created in the ‘monitor’ section below - 12 16and )

3. Sets the level of Outputs 1 and 2 on the rear panel

4. Shows the level of Input 1 or Output 1 (dependent on the position

of the ‘meters’ switch below - 14)

5. Sets the gain (level) of Input 1

6. Sets the gain (level) of Input 2

7. Shows the level of Input 2 or Output 2 (dependent on the position

of the ‘meters’ switch below - 14)

8. Sets the level of Outputs 3 and 4 on the rear panel

9. Chooses the signal sent to Outputs 3 and 4. This can be ‘a’ (nio

outputs 1/2 from the sequencer), ‘b’ (nio outputs 3/4 from the

sequencer) or ‘mon’ (the monitor mix created in the ‘monitor’

section below - 12 and 16)

10. Sets the level of Headphones 2

11. Indicates when nio’s Direct FX software is in use

12. Creates the blend of inputs and ‘playback’ (recorded) tracks for the monitor mix. In the extreme clockwise position,

only inputs are heard, whilst in the fully anticlockwise position, only the mix created by the a-b mix dial to the left is heard

13. Pans the inputs left and right respectively (stereo) or both centrally (mono) in the monitoring section (“mon” mix)

14. Selects the source shown by the LED meters above. Choices are Inputs 1/2 in the left position and Outputs 1/2 in

the right position

15. Selects the signal sent to the 2 pairs of headphones. Choices are ‘a’ (nio outputs 1/2 from the sequencer), ‘b’

(nio outputs 3/4 from the sequencer) or ‘mon’ (the monitor mix created in the ‘monitor’ section above - 12 and 16)

16. Creates a blend between ‘a’ (nio outputs 1/2 from the sequencer) and ‘b’ (nio outputs 3/4 from the sequencer).

This becomes the a-b ‘mix’ of playback tracks that can be blended with the inputs using the dial to the right to create

the monitor mix

Product specificaties

Merk:	Novation
Categorie:	Niet gecategoriseerd
Model:	nio 2\|4

Heb je hulp nodig?

Als je hulp nodig hebt met Novation nio 2|4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Novation

Novation Launchkey MMini 25 K4 Handleiding

5 September 2024

Novation Launch Control XL MKII Handleiding

27 Mei 2024

Novation mm10-X Handleiding

12 Januari 2024

Novation Xio 49 Handleiding

9 Juli 2023

Novation FLkey Mini Handleiding

7 Juli 2023

Novation Launchpad Handleiding

3 Juli 2023

Novation A-Station Handleiding

21 Juni 2023

Novation nio 2|4 Handleiding

19 Juni 2023

Novation Supernova II Rack Handleiding

16 Juni 2023

Novation Launchkey 25 MK1 Handleiding

16 Juni 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Bosch Styline MFQ40303GB Handleiding

22 November 2024

Bosch HEZ9YZ36UC Handleiding

22 November 2024

Peerless-AV PTM400S Handleiding

22 November 2024

Peerless-AV KIL746-EUK Handleiding

22 November 2024

Peerless-AV KILH543-EUK Handleiding

22 November 2024

Peerless-AV KIP588-4LG-EUK Handleiding

22 November 2024

Peerless-AV KIPC2546B-EUK Handleiding

22 November 2024

Peerless-AV KIPC2543B-EUK Handleiding

22 November 2024

Peerless-AV PTM200 Handleiding

22 November 2024

Peerless-AV KIPC2565B-EUK Handleiding

22 November 2024