Novation Launchpad Pro Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Novation Launchpad Pro (28 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 101 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28
Programmer’s Reference Guide
Document number: FFFA001331-02
Version 1.01
Written by John Wilson and Lottie Thomas
Edited by Alex Godfrey & Ed Fry
© Focusrite Audio Engineering LTD
© Focusrite Audio Engineering LTD
2
Table of Contents
About this Guide 3
Number Systems and MIDI conventions 3
Bootloader 3
Basic Features 4
Basic Layouts 4
Basic 4Communication
Set- 5up Screen
Colours 6
Note Layout 6
Drum Layout 8
Fader Layout 9
Programmer Layout 16
Device Inquiry 18
Advanced Features 20
Lighting LEDs Using SysEx Messages 20
Flashing 21
Pulsing 21
RGB Mode 22
MIDI Clock 23
Text scrolling 23
System Exclusive Messages 25
Other SysEx Messages 28
© Focusrite Audio Engineering LTD
3
About this Guide
Launchpad Pro communicates using MIDI over USB and MIDI jack, operating in both directions. This manual,
describing the MIDI communication format, is all the information you need to be able to write software that
is customised for Launchpad Pro.
This is not an exhaustive document. Certain extra System Exclusive messages are used for authentication,
and for remote firmware upgrade. These are beyond the scope of this document, however, it is worth
knowing that they exist in case you encounter them while you are playing with Launchpad Pro.
Number Systems and MIDI conventions
There are three ways of expressing MIDI data in this manual. The first, where appropriate, is a plain English
description of the message. When we describe a musical note, middle C is deemed to be ‘C3’ or note 60.
MIDI channel 1 is considered to be the lowest- - . numbered MIDI channel and channels range from 1 16
MIDI messages are also expressed in plain data, with decimal and hexadecimal equivalents. The hexadecimal
number will always be followed by an ‘h’ and the decimal equivalent given in brackets. For example a Note
O h n message on channel 1 is signified by the status byte 90 (144).
Bootloader
Launchpad Pro has a bootloader mode that allows the user to configure and save certain settings. The
bootloader is accessed by holding the button device n. Setup whilst switching the o
The top two rows of square buttons he device The device ID can be used to set t USB ID of Launchpad Pro.
ranges from 1 – 16 and the selected ID is represented by an orange button This also sets the USB . identity,
which h h.ranges from 51 to 60 The default ID from the factory is 1. If more than one Launchpad Pro is to be
used on USB, then each device must have a different USB ID selected.
Figure 1: Bootloader display


Product specificaties

Merk: Novation
Categorie: Niet gecategoriseerd
Model: Launchpad Pro

Heb je hulp nodig?

Als je hulp nodig hebt met Novation Launchpad Pro stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Novation

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd