Nova Vision Handleiding

Nova Babyfoon Vision

Lees hieronder de đź“– handleiding in het Nederlandse voor Nova Vision (6 pagina's) in de categorie Babyfoon. Deze handleiding was nuttig voor 58 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
1. Camera
The camera uses either the integrated battery or the accompanying AC
adapter. The battery charges when the AC adapter is used. The power
indicator LED flashes while the battery is charging (red if the camera is off
and green if it is turned on). When the camera is fully charged the indicator
switches off or, if the camera is turned on, is a constant green. The camera
or the monitor can also be charged from a PC using the included USB
cable.
1.1 Camera on/off
Press On/Off for 2 seconds and the camera switches on. The Power
indicator LED is lit. Press On/Off for 2 seconds and the camera switches
off. The Power indicator LED goes out.
1.2 Integrated battery
If the power is disconnected, the camera starts using the battery auto -
matically. When the battery is low, the Power indicator LED will change
from green to red.
1.3 Night vision
The camera has 8 infrared LEDs in order to capture clear images at
distances of up to 3m in total darkness. These are activated automatically
when the inbuilt light sensor registers that the light is inadequate.
Note:The image changes to black/white when “night vision” is active.
1.4 Assembly
Screw the accompanying stand to the camera and tighten the nut.
Find somewhere to place the camera and point the lens at the area that is
to be monitored. Make sure that the child cannot reach the camera or the
adapter cable. The camera can be turned in all directions and is locked/
released with the large screw on the back of the stand. If the camera is to
be attached to the wall, check its placement before fixing in position.
Setup
3
GB
VisionNova 5 2009:Layout 1 30-10-09 14:25 Side 3
2 Monitor
2.1 LCD screen
Signal indicator. This behaves like a mobile
phone, showing whether the signal is strong
or weak. It is normal for the signal strength
to vary, even over short distances!
Alarm symbol. Shown if an alarm is set.
Battery indicator. Shows the remaining battery life using 4 levels.
Becomes transparent and flashes when the battery is empty.
The monitor uses a rechargeable 3.7V 850mAH Li-ion battery (included)
or one of the included AC power adapters.
Inserting batteries
Note: The Li-ion battery that is included should be charged for 10 hours
before being used for the first time.
1. Open the cover of the battery compartment on the back of the monitor.
2. Insert the battery so that the contacts on the battery touch the contacts
inside the battery compartment (printed side up).
3. Put the cover back in position.
4. Turn on the monitor by pressing the On/Off button for 3 seconds. The
Power indicator will light.
5. Press the On/Off button for 3 seconds to turn it off.
Note 1: The Power indicator is green when the battery is charged and red when
it is empty.
Note 2: Remove the battery if the monitor is not going to be used for
a prolonged period of time.
Mains power
1. Plug one of the included AC power adapters into a power socket and into
the socket on the side of the monitor. The battery is now charging. This is
shown by an animated symbol on the screen. The battery is fully charged
when the symbol is constant.
Note: When the connection between the camera and the monitor is functioning
properly the link indicator will have a green light. If the connection is
broken this will go out.
2.2 Adjusting volume
Press
M
or
L
to adjust the volume.
4
GB
VisionNova 5 2009:Layout 1 30-10-09 14:25 Side 4


Product specificaties

Merk: Nova
Categorie: Babyfoon
Model: Vision

Heb je hulp nodig?

Als je hulp nodig hebt met Nova Vision stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Babyfoon Nova

Handleiding Babyfoon

Nieuwste handleidingen voor Babyfoon