Nissin I40 (Fujifilm) Handleiding

Nissin Flitser I40 (Fujifilm)

Lees hieronder de 📖 handleiding in het Nederlandse voor Nissin I40 (Fujifilm) (22 pagina's) in de categorie Flitser. Deze handleiding was nuttig voor 70 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/22
for Fujifilm
INSTRUCTION MANUAL
Thank you for purchasing a Nissin product
Before using this flash unit, please read this instruction manual and
refer your camera owner’s manual carefully to get a better
understanding of the proper operation to enjoy flash photography.
Nissin i40 Fujifilm version has been developed for digital Fujifilm system cameras
with hotshoe and the latest TTL flash control technology. Please note that i40 Fujifilm
is not usable with other branded cameras for TTL operation.
Please refer Nissin’s compatibility chart shown at its home page for details and
recent updates: http://www.nissin-japan.com or http://www.nissindigital.com
SPECIAL FEATURES
The i40 features the use of a selector dial to quickly
move through all settings.
Flash protection function:
When the red LED lamp starts blinking, it means
that flash is overheating.
The LED turns red when charging.
When the LED lamp turns green, the flash is
charged and you can start to shoot.
Compatible cameras
1
These safety instructions refer to important information on how to use this product
safely and properly. Please read the following instructions before using the product.
SAFETY INSTRUCTIONS
WARNING
The flash unit contains high voltage electric parts. Do not try to open or repair the flash unit.
Return it back to the repair service station or the store where you bought it from.
Do not touch the inside parts from the opening when the unit was dropped or broken.
Do not shoot the flash directly to the eyes at short distance. It may damage the eyes.
When taking a flash picture, especially toward a baby, it is recommended to keep the flash unit
at least 1 meter (3.3feet) away from the subject. Or use diffuser or bounce the light to the
ceiling or wall to soften its intensity.
Do not place the flash unit near any flammable gas, chemicals or such liquids. It may cause fire
or electric shock.
Do not touch the flash unit with wet hands or use in the water. The flash unit carries high
voltage inside and it may cause an electric shock.
Do not shoot the flash unit directly at the driver of automobiles or such vehicles.
Do not set the flash window close to the human body and shoot, which may get scalded.
Place the batteries correctly in position. Placing the batteries in wrong polarity may cause
leakage, exothermic heat or explosion.
Do not use the included carabiner for climbing.
CAUTIONS
Do not leave or store the flash unit in the temperature over 40ºC/ 104ºF, such as in the
automobile.
The flash unit is not water resistance. Keep the unit away from rain, snow and humidity.
Do not use benzene, thinner or other alcoholic agents to clean the unit.
Do not use this flash unit with cameras which are not recommended in the compatibility list at
official website, otherwise it may damage the camera’s circuitry.
Remove the batteries when not in use for a longer period of time.
Do not have a heavy impact to the flash unit, nor throw it onto a hard surface floor.
This symbol refers to the possibility of personal injury, death or property
damage if not followed as described.
This sign refers to conditions which may cause damage or defect.
2


Product specificaties

Merk: Nissin
Categorie: Flitser
Model: I40 (Fujifilm)

Heb je hulp nodig?

Als je hulp nodig hebt met Nissin I40 (Fujifilm) stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Flitser Nissin

Handleiding Flitser

Nieuwste handleidingen voor Flitser