Nexxt Nebula1200-AC Handleiding

Nexxt Router Nebula1200-AC

Lees hieronder de 📖 handleiding in het Nederlandse voor Nexxt Nebula1200-AC (15 pagina's) in de categorie Router. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/15
Model: ARN04904U2
Nebula1200-AC
DUAL BAND AC WIRELE S S ROU TE R
WARRANTY
Must regist er at:
nexxtsolutions.com/warranty
YEAR
*
*
SPEEDS
1200
Mbps
WIRELESS
COMBINED
ULTIMATE RANGE
Versión 11-16-2016
1. Preliminary steps
2. Product layout
Thank you for purchasing the new dual band router Nebula 1200-AC
from Nexxt Solutionsâ„¢. If any of the following items are mismatched,
missing or damaged, please contact the store from whom you
purchased the unit for immediate replacement.
This advanced network device works as wireless router, universal
repeater and WISP client. Before setting up the router, you must verify
that you have high-speed internet access available. The most widely
used connection nowadays is broadband DSL or Cable. The description
used in this guide is based on that type of connection.
LED indicators on the front panel provide information about network
activity, the connection and link status of the ports in real time. They
also facilitate activity monitoring and troubleshooting the performance
of the device.
• Dual band AC wireless router
• Power adapter 110/220V
• Network cable
• User guide
English
USER GUIDE
WPSW
Antennas: Four 5dBi omnidirectional antennas.
3/IPTV: This IPTV port can be used for connecting an Internet
Protocol TV receiver, and as a LAN port, when the IPTV feature is
not enabled.
LAN ports (2/1): Connect your local laptop or desktop computers
in your network to any of these RJ45 ethernet ports.
WAN: This RJ45 port is where you will connect the DSL/cable
modem or ethernet line from your ISP.
Power DC-IN: Connect the supplied power adapter to this jack.
Wi-Fi: Use this button to enable and disable the wireless function.
Reset/WPS:
Press and hold this button for about 8 seconds until all LEDs light
up once, and then release it to restore the device to its factory
default values.
Press and hold for a second to use the WPS feature (if enabled).
To successfully establish a WPS link, within the first 2 minutes the
wireless client’s WPS feature must be enabled.
First determine the optimum location for the router. The best place
is usually at the center of your wireless network with the antennas in
the upright position.
Then, connect the modem to the internet port of the router using
the supplied ethernet cable.
Connect your PC to the router if using a wired connection.
Insert one end of the supplied power adapter to the AC input jack
located on the rear panel of the router, before plugging the other
end to a standard electrical wall outlet.
3. Hardware installation
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
1
4
2
3


Product specificaties

Merk: Nexxt
Categorie: Router
Model: Nebula1200-AC

Heb je hulp nodig?

Als je hulp nodig hebt met Nexxt Nebula1200-AC stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Router Nexxt

Handleiding Router

Nieuwste handleidingen voor Router