Neutrik NL4FXX-W-S Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Neutrik NL4FXX-W-S (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 5 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
ASSEMBLY INSTRUCTION
R
Page 1BDA 638
Ă°
ATTENTION: speak IS NOT TO BE USED AS AN AC/DC MAINS OR POWER SUPPLY CONNECTOR!ON®
C CONNECTOR NOT TO BE ENGAGED AND DISENGAGED IN NORMAL USED WHEN LIVEAUTION:
OR UNDER LOAD.
ATTENTION: NE PAS UTILISER POUR COUPER LE COURANT
TO BE INSTALLED BY QUALIFIED PERSON .ONLY
A
B
C
A
B
Place bushing and chuck overthe (1) (2) the
cable.
Important: huckC and Bushing cannot be placed
over the cable after the assembly or the insert.
Prepare cable as shown.the
Slide the cable into the contacts and clamp
BASSEMBLY INFORMATION
CABLE PREPARATION: 2 POLE
Approval based:
Rating:
Wire size:
Cable O.D.: *-S:
*-L:
EN / IEC
EN 61984
IEC 61984
250 V ac / 30 A
1.0 - 4.0 mm2
6.0 - 12.0 mm (0.24 - 0.47")
10.0 - 16.0 mm (0.39 - 0.63")
UL / CSA
UL 1977
CAN/ No.CSA C22.2 182.3
250 V ac / 30 A
16 - 11 AWG
6.0 - 12.0 mm (0.24 - 0.47")
10.0 - 16.0 mm (0.39 - 0.63")
CABLE PREPARATION: 4 POLE
C
WIRING: 2 POLE WIRING: 4 POLE
1+
1-
2-
2+
1+
1-
[0. "]35
9 mm
[ ”]1.06
2 mm7
[0. "]35
9 mm
[ ”]1.06
2 mm7
1.
2.
speakON®Loudspeaker Cable Connector
|
NL2FXX-W-* & NL4FXX-W-*
AIMPORTANT SAFETY INFORMATION
Torx size
T8
Torque Value 0.7 Nm
(6.2 inch pound)
ASSEMBLY INSTRUCTION - speakON Cable Connector NL2FXX-W-* & NL4FXX-W-*
I
Page 2BDA 638
E
Position chuck (1) on insert (2).
Slide intoinsert (2) with chuck (1) together
housing (3)
.
Slide bushing (4) over ( ).chuck 1
Hold the connector with the NEUTRIK tool (5)
and tighten bushing with the NEUTRIK tool
(6) as shown.
For an exact mounting position use a torque
wrench with mm ( inch) and27 1 1/8 hex bit (7)
tighten it with 2. Nm ( ).5 22 inch pound / 1.8 lb-ft
NEUTRIK tool Information:
(5) HTLACA
(6) HTLACB
Ă°
D
3
1.
2.
D
E
4
5
7
Neutrik
HTLACA
27 mm 1 1/8 inch
Hex bit
4
6
Torque Value 2.5 Nm
(22 inch pound / 1.8 lb-ft)
Neutrik
HTLACB
8
Important:
Push and turn simultaneously.
Important:
Align the chuck by positioning
the nose into keyway.
Important:
All 3 parts must habe the
SAME COLOR CODING,
BROWN (2 pole) or
GREEN (4 pole).
.
FOR DISASSEMBLY!
1. Use the Neutrik tool HTLACB.
Position the tool on the surfaces and open the2.
clamping sleeve.
HTLACB
CAUTION
To ensure protection category, do not expose the connection to
bending forces (e.g. do not attach loads to the cable, no free-
dangling cable windings etc.).
ASSEMBLY INSTRUCTION - speakON Cable Connector NL2FXX-W-* & NL4FXX-W-*
I
https://www.neutrik.com/products/audio/speakon
FMore Information on the www.neutrik.com
Page 3
DDISASSEMBLY INFORMATION
ESAFETY INFORMATION
CFINISHED CONNECTOR
NL2FXX-W-* NL4FXX-W-*
SAFETY WARNING
For safety and certification reasons the connector must be
replaced in case of any broken parts or .excessive wear and tear
FORCE
www.neutrik.com
Draft. Nr.: BDA 638 V4
Update: 2023-07-19
Data subject to change without prior notice. 20 NEUTRIK23 . NEUTRIK / speakON are registered trademark of Neutrik AG.© ® ® ®
ALL RIGHTS RESERVED.
Neutrik AG LI-9494 Schaan
I
A brand of the Neutrik Group


Product specificaties

Merk: Neutrik
Categorie: Niet gecategoriseerd
Model: NL4FXX-W-S

Heb je hulp nodig?

Als je hulp nodig hebt met Neutrik NL4FXX-W-S stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Neutrik

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd