Netatmo NWA01-WW Handleiding

Netatmo Weerstation NWA01-WW

Lees hieronder de 📖 handleiding in het Nederlandse voor Netatmo NWA01-WW (5 pagina's) in de categorie Weerstation. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
Wind Gauge for Netatmo Weather Staon
What is the addional Wind Gauge module?
You can add an addional Wind Gauge module to your Netatmo Weather Staon. It does not work
separately and needs the Netatmo Staon to operate.
It allows you to monitor wind speed and direcon.
You can add only one Wind Gauge module to your Netatmo Weather Staon.
Downloaded from www.vandenborre.be
Setup and precauon
Important:
- Do not twist the Wind Gauge.
- Do not touch the sensors.
Setup from smartphone / PC
To add an addional Wind Gauge module to the staon, follow the instrucons on its quick start
guide, or click on "Add/Remove a module" in the sengs menu, under "My staons". The app will
guide you through the installaon.
1. You need to launch the module Manager from the smartphone/tablet app or your PC.
o If you are using a PC, connect the staon to the PC with the USB cable.
o If you are using your smartphone, touch the top of the staon’s main module unl it
blinks blue, the staon is now in Bluetooth mode so it can be congured from your
phone.
2. Select the opon New Wind Gauge . “ ”
3. Remove the baeries from the Wind Gauge and reinsert them. You need to unscrew the four
screws at the boom base to access the baeries compartment.
4. Once the baeries are reinserted, place the Wind Gauge next to the staon (at about 10 cm
/ 4 inches).
5. The Staon will recognize the module. The setup is done. Now you can place the Wind Gauge
up to 100m away from the main Staon, nd below some ps on how to nd the best spot.
The Wind Gauge should be placed at the highest point possible in order to get reliable measures and
avoid turbulences created by obstacles surrounding it. It is recommended to place it about 1 m / 4 .
above the top of your roof.
The Wind Gauge should be placed horizontally and the arrow (there’s one at on the top and one in
the boom) must be poinng to the North. You can use your smartphone's compass app to check
that when you install your Wind Gauge at home.
To secure the Wind Gauge, you may use a ¼ inches standard camera mounng screw.
Downloaded from www.vandenborre.be
Wind measurement
Wind speed and direcon are measured using four ultrasonic transducers. The Wind Gauge measures
the me between the moment a signal is emied and the moment it is received, along two
perpendicular direcons. Wind speed along the N-S axis and W-E axis are then merged using
trigonometric funcons to obtain the real speed and the direcon.
Displayed measures
Your dashboard displays:
- Last 5 minutes average wind speed and direcon. The arrow indicates the wind direcon and its size
is proporonal to the speed. Light grey dashes around the arrow indicate the dominant wind
direcons during the last hour.
An arrow poinng down means that the wind is blowing from the North (N = 0°). An arrow poinng
to the le means that the wind is blowing from the East (E = 90°).
- Maximum wind gust (speed and direcon) over the last 10 minutes.
- Maximum wind gust (speed and direcon) during the day (since last midnight).
Graphs let you navigate through historic average wind (speed and direcon) and gusts (speed and
direcon).
Downloaded from www.vandenborre.be


Product specificaties

Merk: Netatmo
Categorie: Weerstation
Model: NWA01-WW
Kleur van het product: Black,Transparent
Ingebouwd display: Nee
Gewicht: 260 g
Breedte: 85 mm
Diepte: 85 mm
Hoogte: 110 mm
Gewicht verpakking: 545 g
Breedte verpakking: 160 mm
Diepte verpakking: 100 mm
Hoogte verpakking: 160 mm
Gebruikershandleiding: Ja
Stroombron: Batterij/Accu
Connectiviteitstechnologie: Draadloos
Type stroombron: Batterij/Accu
Werkt met Amazon Alexa: Ja
Veiligheidsfunties: UV resistant,Waterproof
Upgraden van firmware mogelijk: Ja
Klok functie: Nee
Ophangsysteem voor aan de muur: Ja
Maximale afstand: 100 m
Draadloze technologie: Wi-Fi
Meetfuncties: Anemometer (windsnelheid)
Wifi: Ja
Bedrijfstemperatuur (T-T): -40 - 65 °C
Relatieve vochtigheid in bedrijf (V-V): 0 - 100 procent
Type batterij: AA
Ultraviolet ( UV) bescherming: Ja
Aantal batterijen (sensor): 4
Meetfuncties grafisch display: Ja
Aantal sensoren ondersteund (max): 1
Slim weerstation: Ja
Gemeten omgevingsomstandigheden: Windsnelheid
Windsnelheid meting bereik: 0 - 50 m/s
Windsnelheid meting eenheid: km/h,m/s,mph

Heb je hulp nodig?

Als je hulp nodig hebt met Netatmo NWA01-WW stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Weerstation Netatmo

Handleiding Weerstation

Nieuwste handleidingen voor Weerstation