Nedis BTTR100BK Handleiding

Nedis Audiostreamer BTTR100BK

Lees hieronder de 📖 handleiding in het Nederlandse voor Nedis BTTR100BK (76 pagina's) in de categorie Audiostreamer. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/76
BTTR100BK
MANUAL (p. 2)
ANLEITUNG (S. 5)
MODE D’EMPLOI (p. 8)
GEBRUIKSAANWIJZING (p. 11)
MANUALE (p. 14)
MANUAL DE USO (p. 17)
MANUAL (p. 20)
HASZNÁLATI ÚTMUTATÓ (o. 23)
YTTÖOHJE (s. 26)
BRUKSANVISNING (s. 29)
NÁVOD K POUŽITÍ (s. 32)
MANUAL DE UTILIZARE (p. 35)
ΕΓΧΕΙΡΙΔΙΟ XPHΣHΣ (σελ. 38)
BRUGERVEJLEDNING (s. 41)
VEILEDNING (s. 44)
ИНСТРУКЦИЯ (47 стр.)
KILAVUZ (s. 50)
KASUTUSJUHEND (lk. 53)
NÁVOD (s. 56)
ROKASGRĀMATA (lpp. 59)
NAUDOJIMO VADOVAS (62 p.)
PRIRUČNIK (str. 65)
РЪКОВОДСТВО (p. 68)
INSTRUKCJA OBSŁUGI (str. 71)
PRIROČNIK (str. 74)
Audio transmitter with Bluetooth® Wireless Technology for headphones
ENGLISH
2
Product view
Pairing button
USB power connector
Audio input for TV or audio device
Setup
1. Connect the 3.5mm connector to the BTTR100BK.
2. Connect the other 3.5mm connector to the headphone output of a TV or
audio device.
3. Connect the USB connector to the USB port of the TV or audio device (or
connect the USB connector to a USB power adapter)
Operation
Connect the rst set of headphones or music receiver:
1. Take your Bluetooth® headphones or Bluetooth® music receiver.
2. Press the pairing button (check the device manual).
ENGLISH
3
3. After being connected for the rst time, the two devices will recognise each
other next time.
Connect the second set of headphones or music receiver:
1. Take the second set of Bluetooth® headphones or Bluetooth® music
receiver.
2. Press the pairing button (check the device manual).
3. Press the pairing button on the BTTR100BK once for approx. 1~2seconds.
The LED light starts blinking while the transmitter searches for the second
set of headphones or music receiver. The device that was connected rst, is
muted.
4. If the devices are connected, the LED light is constantly switched on.
Note
The BTTR100BK features the option to connect two Bluetooth® A2DP devices at
the same time. If you would like to connect a second A2DP device, you need to
reset the BTTR100BK to establish a new connection.
Reset
Press the pairing button on the BTTR100BK and release it again. The LED light
on the BTTR100BK starts blinking while the transmitter is searching for A2DP
devices nearby.
LED indication
Indication Meaning Description
Flash every 5seconds Pairing Searching for a device in pairing mode
Constantly switched on Connected BTTR100BK and device are connected
Troubleshooting
If you do not hear any sound coming from your headphones or music receiver,
check the following:
- make sure the BTTR100BK is powered;
- make sure the audio cable is correctly connected to the BTTR100BK;
- make sure that the audio source is working properly;
- make sure the volume of the audio source is set correctly;
- make sure your device is at a maximum distance of 10metres of the audio
transmitter.


Product specificaties

Merk: Nedis
Categorie: Audiostreamer
Model: BTTR100BK

Heb je hulp nodig?

Als je hulp nodig hebt met Nedis BTTR100BK stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Audiostreamer Nedis

Handleiding Audiostreamer

Nieuwste handleidingen voor Audiostreamer