Navman MiVue 750 Handleiding

Navman Dashcam MiVue 750

Lees hieronder de 📖 handleiding in het Nederlandse voor Navman MiVue 750 (2 pagina's) in de categorie Dashcam. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

User Manual

DDR MiVue

Revision: R01

(10/2019)

Trademark

All brand and product names are trademarks or registered trademarks of their respective companies.

Disclaimer

Speciﬁcations and documents are subject to change without notice. Navman does not warrant this document

is error-free. Navman assumes no liability for damage incurred directly or indirectly from errors, omissions, or

discrepancies between the device and the documents.

Visit www.navman.com.au | www.navman.co.nz for the latest User Manual available.

Note

Not all models are available in all regions.

Depending on the speciﬁc model purchased, the colour and look of your device and accessories may not exactly

match the graphics shown in this document.

Regulatory information

For regulatory identiﬁcation purposes, this Navman device is assigned a model number of N583. Marking labels

located on the exterior of your device indicate the regulations that your model complies with. Please check the

marking labels on your device and refer to the corresponding statements in this section. Some notices apply to

speciﬁc models only. The user needs to switch off the device when exposed to areas with potentially explosive

atmospheres such as petrol stations, chemical storage depots and blasting operations.

WEEE

This product must not be disposed of as normal household waste, in

accordance with the EU directive for waste electrical and electronic

equipment (WEEE – 2012/19/EU). Instead, it should be disposed of by

returning it to the point of sale, or to a municipal recycling collection point.

Privacy notice

Location Information

The Navman device and software a customer uses may, by its nature and function, create, contain, receive, store,

or transmit location based information that, either alone or in combination with other information, could identify a

person, establish a person's whereabouts, reveal the nature or type of places that a person visits or in which a person

is interested, or identify a person's movements, habits, and other information about a person ("Location Information").

This Location Information is used to provide location related services to customers. For this purpose, Navman* may

disclose Location Information to its related companies, service providers, and agents which may be located overseas in

countries including the USA, China, Taiwan, Australia, New Zealand and the Philippines. Except as explained below in

relation to country location when using connected device features, it is Navman's policy not to collect or store Location

Information, or to provide Location Information to unafﬁliated third parties or persons who are not agents or service

providers of Navman, without ﬁrst receiving the consent of the customer (such as where the customer subscribes to,

or directly or indirectly requests, location-based or similar services from Navman or a third party). Notwithstanding

this clause, if, and to the extent that, a court order, subpoena, or rule of law requires that Navman disclose Location

Information to a third party, Navman reserves the right to comply with such court order, subpoena, or rule of law.

Connected Device Information

If the customer accesses the Navman connected device feature (or a similar feature), including from a website or

mobile device, Navman may collect personal information about the customer through the connected device, such as

the customer’s username, email address, social networking account username (if the customer chooses to connect to

its social networking account), what country the customer is located in when using the device (but not other Location

Information), and internet protocol address, (“Connected Device Information”). Connected Device Information

may be automatically synced between the customer's compatible and connected devices. When a customer uses

the connected device feature, Location Information and dashcam recordings pass temporarily through our cloud

infrastructure and to your device for the purpose of providing that service to you. However, we do not collect or store

this data (except country location as explained above), even temporarily.

Navman will use this information to fulﬁl the customer’s requests for products and services, for communication, to

offer products or services related to the customer’s location (including by providing information about local businesses

onto the customer's Navman device), interests and preferences and to assist Navman in its development of products

and services. Connected Device Information may be provided to Navman's related companies, agents and third party

service providers to enable Navman to deliver programs, products, information and services and to maintain Navman’s

websites, mailing lists and other services. The recipients that Connected Device Information is provided to may be

located in different countries to that in which the customer is based, including in the USA, China, Taiwan, Australia,

New Zealand and the Philippines. The third parties that data is provided to may include social media providers if the

customer has linked the connected device feature to a social media account. Connected Device Information will not

be transferred to third parties that are not acting on behalf of Navman without the customer’s consent unless required

by law or for the purposes disclosed in this clause. The customer may choose not to provide Connected Device

Information to Navman, but this may cause certain features of the connected device to be unavailable.

Information Storage

Any Location Information or Connected Device Information will be collected and held by CloudMade Inc., 1370

Willow Road, Menlo Park, CA 94025, USA (a third party company which provides cloud services to us), MiTAC

Australia Pty Ltd, Unit 5, 43-51 College Street, Gladesville, NSW 2111, Australia. Navman will take reasonable steps to

secure any Location Information or Connected Device Information about the customer.

Access, correction and complaints

The customer may request to see a copy of the Location Information or Connected Device Information held by

Navman about the customer, and can request corrections to be made to the Location Information or Connected

Device Information. Navman's privacy policy contains information about how a customer may exercise their rights

under the foregoing sentence, how a customer may complain about any breach of privacy laws or applicable codes,

and how Navman will deal with such a complaint. Navman's privacy policy is available at http://www.navman.com.

au/Privacy_Policy.aspx.

* In this Privacy Notice, the term "Navman" means MiTAC Australia Pty Ltd (an entity registered in Australia and New

Zealand and trading as Mitac Professional Solutions, Magellan GPS Technology, MIO TECHNOLOGY and NAVMAN

TECHNOLOGY.

1-year limited warranty

1. Scope.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law and the New Zealand

Consumer Guarantees Act 1993. You are entitled to a replacement or refund for a major failure and for compensation

for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if

the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Where a product is comprised of both hardware and software and a separate software licence is provided with the product,

the terms of the software licence apply to the software and this limited warranty applies only to the hardware portion of the

product. This section does affect any rights you may have under the Consumer Guarantees (as deﬁned below).

This warranty is given by MiTAC Australia Pty Ltd ("Navman”), in Australia and New Zealand.

2. Warranty.

Apart from any rights that you may have because of the Consumer Guarantees (as deﬁned below), Navman warrants

to the original end-user retail purchaser from an authorized Navman dealer that this product will be free from defects in

material and workmanship and (where a User Manual is provided) will substantially conform to the speciﬁcations and

descriptions in the User Manual for the Warranty Period. The "Warranty Period" is one year from the date of original

retail purchase in Australia and New Zealand, as supported by a complete, legible and dated copy of the original sales

receipt.

3. Exclusions and Limitations.

This section sets out exclusions and limitations which apply to the warranty. It does not affect the rights of any person

under the Consumer Guarantees (as deﬁned below). This warranty does not cover any non-rechargeable batteries,

ﬁnishes, service performed or attempted by anyone other than an authorised Navman Service Centre, installations

or defects caused by improper installation, any products, components or parts not manufactured by Navman, any

claim in relation to infringement of any patent, trademark, copyright or other proprietary right, including trade secrets,

any damage or failure of the product caused by shipping, misuse, tampering, abuse, negligence, wear and tear in

excess of that expected from normal consumer use, unauthorised attachments or modiﬁcation, failure to maintain

as recommended, electrical discharges (including lightning), exposure to water (except as otherwise stated in the

User Manual), moisture or liquids, proximity or exposure to heat, disasters such as ﬁre, ﬂood, wind, and lightning,

or failure of availability or reliability of any external resource necessary or useful for the product's operation (for

example, and to the extent applicable, the global positioning system constellation of satellites and their transmissions;

trafﬁc, weather, navigation, point-of-interest, or other data; and radio-frequency or other wired or wireless signals,

whether transferring data or otherwise). Improper or incorrectly performed maintenance or repair, commercial use,

or alteration or removal of any serial number or the opening, dismantling or repair of this product by anyone other

than an authorised Navman Service Centre each will void this warranty. To the extent that the product is used or

useful for navigation: (a) the product, including any associated electronic charts or maps, navigation data, or radio or

other services, is a supplement to other navigational resources and not a replacement of them; (b) the product does

not replace any charts, maps, or other information required by law to be used for any activity (such as nautical or

aeronautical charts); (c) errors and omissions are inevitable; (d) the user is responsible for cross-checking the product

against other sources of navigation information; and (e) Navman recommends having back-up navigation tools

available in the event that the product becomes inoperable.

4. Remedies and How to Obtain Warranty Service.

If the product is defective or fails to conform with the warranted speciﬁcations, and you send the product and all

other required information and materials to Navman, or return it to the retail outlet from which it was purchased, on

or before the last day of the Warranty Period (refer to the process at 1 to 3 below), , Navman will repair or replace

(at Navman's option) the product. This is your remedy for defective or non-conforming products under Navman's

warranty. You may have other rights or remedies under applicable laws (including under the Consumer Guarantees,

as deﬁned below).

To obtain your warranty service:

1. Contact Navman to obtain a Return Materials Authorization number (RMA). You can reach Navman using the

Contact Details outlined at 3 below or through your authorized Navman dealer.

2. Pack the product, a copy of your dated purchase receipt, your address and telephone number, and any other

information Navman requests as part of the return authorization process (such as any return authorization form

you receive) in sturdy packing material.

Ship the product and the other required items to Navman at the address speciﬁed in the Contact Details below, or

return it to the retail outlet from which it was purchased, on or up to the end of the Warranty Period. You should

retain proof of shipping to evidence the date of shipment. Please send the item by registered post for tracking

purposes.

Contact Details:

In Australia:

Attention: MiTAC Repairs

Locked bag 5010

Gladesville

NSW 1675

Phone: 1300 628 626

Email: pcnsupportaus@navman.com.au

In New Zealand:

New Zealand Couriers INTL

Attention: Louna

Navman Returns

32 Botha Rd

Penrose

Auckland

Phone: 0800 466 286

Email: pcnsupportaus@navman.com.au

When returning products you must set out:

Sender's name: ...................................................................................

Sender's address: ...................................................................................

Sender's phone: ...................................................................................

Sender's email: ...................................................................................

RMA number (compulsory - please call the support number above for your RMA number).

If an RMA is not obtained before sending the unit in for repair, the unit will be quarantined and this will add to the repair

turnaround time by at least one week.

You must pay for shipping and any insurance to get the product to Navman at the applicable address. Except where

otherwise provided by Consumer Guarantees (as deﬁned below), you assume all risk of loss or damage to the product

until it arrives at Navman's facility. Navman will pay for ground shipping of the new or repaired product back to you at an

address in the same country as the repair facility and assume all risk of loss or damage to the product until it arrives at the

address you specify. You must request, and pay for, any different shipping method. The repair of the product may result

in loss of data. Navman will not be responsible for the loss or alteration of any user data stored in the product. You should

back up or otherwise preserve any such data before sending the product to Navman. Except where otherwise required

by Consumer Guarantees (as deﬁned below in this document), if Navman reasonably determines that the product has

not failed to meet the standards of the warranty, you will be liable for the cost of return shipment to you, Navman may

require payment of such costs before returning the product to you, and the risk of loss or damage will remain with you

notwithstanding Navman's possession of the product. The Warranty Period will stop running on the day you send the

product to Navman. The remainder of the Warranty Period will begin to run again when the repaired or replacement

product arrives at the address you specify.

5. Applicable Law.

Where the product was acquired by the original retail purchaser in Australia, this limited warranty is governed by the

laws of New South Wales. Where the product was acquired by the original retail purchaser in New Zealand, this limited

warranty is governed by the laws of New Zealand.

6. Consumer Guarantees

6.1 Interpretation.

In this 1-year limited warranty:

(a) "Australian Consumer Law" has the meaning given to that term in section 4 of the Competition and Consumer Act

2010 (Commonwealth of Australia);

(b) "Consumer" has the meaning given to that term in section 3 of the Australian Consumer Law, or section 2 of the New

Zealand Consumer Guarantees Act 1993, as the context requires;

(d) "PDH Goods or Services" means goods or services of a kind ordinarily acquired for personal, domestic or household

use or consumption.

6.2 Consumer Guarantees

Under the Australian Consumer Law (and other similar legislation of Australian states and territories) and the New

Zealand Consumer Guarantees Act 1993, certain statutory guarantees are conferred in relation to the supply of goods or

services to a Consumer (Consumer Guarantees).

In addition to the warranty, you may also have other rights under the Consumer Guarantees which cannot be excluded,

restricted or modiﬁed by agreement. This warranty does not exclude, restrict or modify the application of any condition,

warranty, guarantee, right or remedy conferred by or implied under any provision of any statute where to do so would: (a)

Precautions and notices

l For your own safety, do not operate the controls of the product while driving.

l A window mount is needed when using the dash cam in a car. Make sure that you place the dash cam in an

appropriate place, so as not to obstruct the driver’s view or deployment of airbags.

l Make sure that no object is blocking the camera lens and no reﬂective material appears near the lens. Please

keep the lens clean.

l If the car’s windscreen is tinted with a coating, it may impact the recording quality.

Safety precautions

About the vehicle power adapter

l Use only the vehicle power adapter supplied with your device. Use of another type of the vehicle power

adapter may result in malfunction and/or danger.

l This product is intended to be supplied by a LISTED Power Unit marked with “LPS”, “Limited Power Source”

and output rated + 5 V dc / 1.0 A.

l Do not use the vehicle power adapter in a high moisture environment. Never touch the vehicle power adapter

when your hands or feet are wet.

l Allow adequate ventilation around the vehicle power adapter when connected to the device. Do not cover

the vehicle power adapter with paper or other objects that will reduce cooling. Do not use the vehicle power

adapter while it is inside a carrying case.

l Connect the vehicle power adapter to a proper power source. The voltage requirements are found on the

product case and/or packaging.

l Do not use the vehicle power adapter if the cord becomes damaged.

l Do not attempt to service the unit. There are no serviceable parts inside. Replace the unit if it is damaged or

exposed to excess moisture.

About the battery

CAUTION! This unit contains a non-replaceable internal Lithium Ion battery. The battery can burst or explode,

releasing hazardous chemicals. To reduce the risk of ﬁre or burns, do not disassemble, crush, puncture, or dispose

of in ﬁre or water.

Caution! Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the

instructions.

l Replace only with the same or equivalent type recommended by the manufacturer.

l The battery must be recycled or disposed of properly.

l Use the battery only in the speciﬁed equipment.

l Battery clause safety information.

Your product uses a Lithium-ion battery. It is important to follow the guidelines set out regarding this type of

Battery. Electronic devices using a lithium – ion battery such as Mobile phones, GPSs and cameras are designed to

operate at a temperature range of approximately 0°C to 50°C. Beyond these temperature limits, there may be a

risk of battery failure, when these electronic goods are exposed to extreme heat conditions for long periods.

It is recommended that you do not use your device in a humid, wet and/or corrosive environment. Do not put, store

or leave your device in or near a heat source, in a high temperature location, in strong direct sunlight and do not

expose it to temperatures over 60°C (140°F). Failure to follow these guidelines may cause the Lithium-ion battery to

leak acid, become hot, explode or ignite and cause injury and/or damage. Do not pierce, open or disassemble the

battery. If the battery leaks and you come into contact with the leaked ﬂuids, rinse thoroughly with water and seek

medical attention immediately. For safety reasons, and to prolong the lifetime of the battery, charging should not occur

at low (below 0°C/32°F) or high (over 45°C/113°F) temperatures.

THE LITHIUM-ION BATTERY CONTAINED IN THE PRODUCT MUST BE RECYCLED OR DISPOSED OF

PROPERLY. IT IS HIGHLY RECOMMENDED YOU USE YOUR PRODUCT ONLY WITH THE SUPPLIED DC POWER

LEAD (VEHICLE POWER ADAPTER/BATTERY CABLE) AND AC ADAPTER (HOME CHARGER) FOR BATTERY

CHARGING.

For more information on how to recycle your old electronic devices, please contact your local council ofﬁce. You

can also visit www.navman.com.au / www.navman.co.nz to view our latest trade-in offers.

Caring for your device

Taking good care of your device will ensure trouble-free operation and reduce the risk of damage.

l Keep your device away from excessive moisture and extreme temperatures.

l Avoid exposing your device to direct sunlight or strong ultraviolet light for extended periods of time.

l Do not place anything on top of your device or drop objects on your device.

l Do not drop your device or subject it to severe shock.

l Do not subject your device to sudden and severe temperature changes. This could cause moisture condensation

inside the unit, which could damage your device. In the event of moisture condensation, allow the device to dry

out completely before use.

l The screen surface can easily be scratched. Avoid touching it with sharp objects. Non-adhesive generic screen

protectors designed speciﬁcally for use on portable devices with LCD panels may be used to help protect the

screen from minor scratches.

l Never clean your device with it powered on. Use a soft, lint-free cloth to wipe the screen and the exterior of your

device.

l Do not use paper towels to clean the screen.

l Never attempt to disassemble, repair or make any modiﬁcations to your device. Disassembly, modiﬁcation or any

attempt at repair could cause damage to your device and even bodily injury or property damage and will void any

warranty.

l Do not store or carry ﬂammable liquids, gases or explosive materials in the same compartment as your device, its

parts or accessories.

l To discourage theft, do not leave the device and accessories in plain view in an unattended vehicle.

l Overheating may damage the device.

About GPS

l GPS is operated by the United States government, which is solely responsible for the performance of GPS. Any

change to the GPS system can affect the accuracy of all GPS equipment.

l GPS satellite signals cannot pass through solid materials (except glass). When you are inside a tunnel or building,

GPS positioning is not available. Signal reception can be affected by situations such as bad weather or dense

overhead obstacles (e.g. trees, tunnels, viaducts and tall buildings).

l The GPS positioning data is for reference only.

Important notice

In addition to the user manual, this document contains the following terms that apply to your use of your Navman

product:

1. Software licence;

2. Privacy notice; and

3. 1-year limited warranty.

The 1-year limited warranty applies separately to your use of the product, and should be read independently of the

other terms contained in the user manual.

Software licence

1. Generally.

Navman ("Licensor") is willing to grant the following licence (the "Licence") to use the software, if any, provided with

this Software Licence and Privacy Notice (whether provided separately or associated with a device) (the "Licensed

Product") to the original retail purchaser (and, subject to the limitations below, certain transferees) of the Licensed

Product or the device upon or with which the Licensed Product was installed or associated as of the time of purchase

(the "Customer") only if Customer accepts all of the terms of the Licence.

PLEASE READ THESE TERMS CAREFULLY. USING THE SOFTWARE WILL CONSTITUTE CUSTOMER'S

ACCEPTANCE OF THE TERMS AND CONDITIONS OF THIS LICENCE. PLEASE NOTE THAT THIS LICENCE IS NOT

ITSELF A LICENCE TO USE NAVIGATION DATA THAT MAY BE INCLUDED WITH A DEVICE. NAVIGATION DATA

IS COVERED BY A SEPARATE LICENCE AGREEMENT. IF YOU DO NOT AGREE TO THE TERMS OF THIS LICENCE,

DO NOT INSTALL OR USE THE LICENSED PRODUCT. RATHER, RETURN THE LICENSED PRODUCT (AND,

IF YOU RECEIVED THE LICENSED PRODUCT INSTALLED ON A DEVICE, RETURN THE DEVICE) PROMPTLY,

INCLUDING ALL PACKAGING AND WRITTEN MATERIALS, TO LICENSOR AND LICENSOR WILL REFUND

TO CUSTOMER THE ORIGINAL RETAIL PRICE PAID FOR THE PRODUCT (LESS DELIVERY AND HANDLING

CHARGES, WHERE PERMITTED).

2. Licence Grant.

This section does not limit or affect the rights of any person under the Consumer Guarantees (as deﬁned in section

7 below).

Licensor grants to Customer a non-exclusive licence (without right to transfer, assign, or sublicence except as stated

in this Licence) to use: (a) the Licensed Product (that term being further restricted where the Licensed Product

is, or contains, a work of authorship ﬁxed in tangible (including electronic) media to mean the single purchased

copy thereof); and (b) the accompanying materials, including any manuals contained in the Licensed Product (the

"Materials"), in accordance with the terms and conditions of this Licence.

3. Limitations on Use.

Customer will not place, secure, or use, or permit any other person to place, secure, or use, the Licensed Product

or any device associated with the Licensed Product, in a manner that limits any user or operator's view, that is likely

to distract any user or operator, or that may cause accidents, personal injury, or property damage. Customer, and

any user that Customer permits to use the Licensed Product or any associated device, is solely responsible for

observing safe driving, operating, and other practices so as to avoid accidents or injury to persons or property.

Certain functionality of the Licensed Product or the device may be dependent upon the use of hardware (sometimes

called a "dongle" or "module") or software keys that enable or unlock the functionality. This Licence does not permit

Customer to use any of such functionality unless Customer has also legitimately bought or otherwise obtained the

appropriate dongle, module, or software key. Each dongle, module, or software key is intended solely to enable

the portion of functionality of the Licensed Product or device described in the documentation associated with the

dongle, module, or software key and no other functionality.

4. Intellectual Property Rights.

As between Licensor and Customer, the copyright and all other intellectual property rights in the Licensed Product

and Materials (including any enhancements or modiﬁcations) are the property of Licensor. Customer must not

rent, lease, reproduce, translate, adapt, vary, reverse-engineer, or modify the Licensed Product or Materials or

communicate the same to any person other than in accordance with the terms of this Licence (or to the extent

permitted by mandatory laws). Customer may not rent or lend the Licensed Product, or reproduce, prepare any

derivative work, distribute, perform publicly, display publicly, perform by digital or other transmission, or broadcast

the Licensed Product. Any rights not expressly granted in this Licence are reserved by Licensor.

5. Transfer of Licence.

Customer may transfer this Licence to a subsequent transferee of the Licensed Product or the device, if any,

upon which the Licensed Product is installed, provided that Customer transfers to the transferee all physical

embodiments of the Licensed Product, the device upon which the Licensed Product is installed, if any, and all of

the Materials, and retains no copy or part of the Licensed Product or the Materials.

Where the Licensed Product is transferred, technical support offered by the Licensor will only be available to the

transferee, if the transferee provides proof of the original purchase of the Licensed Product.

6. Copying.

Customer may not copy the Licensed Product or Materials except that one copy of any separate software

component of the Licensed Product may be made to the extent that such copying is necessary for Customer's own

backup purposes.

7. Liability.

7.1 Interpretation - Consumer Guarantees.

In this Software Licence and Privacy Notice:

(a) "Australian Consumer Law" has the meaning given to that term in section 4 of the Competition and Consumer

Act 2010 (Commonwealth of Australia);

(b) "Consumer" has the meaning given to that term in section 3 of the Australian Consumer Law, or section 2 of the

New Zealand Consumer Guarantees Act 1993, as the context requires;

(d) "PDH Goods or Services" means goods or services of a kind ordinarily acquired for personal, domestic or

household use or consumption.

7.2 Consumer Guarantees

Under the Australian Consumer Law (and other similar legislation of Australian states and territories) and the New

Zealand Consumer Guarantees Act 1993, certain statutory guarantees are conferred in relation to the supply of goods

or services to a Consumer ("Consumer Guarantees").

7.3 Limitation of Liability – Consumer Guarantees.

Where you as a Consumer acquire goods and services under this Licence from Licensor:

(a) subject to clause 7.4, in Australia or New Zealand, where the goods or services are PDH Goods or Services, the

operation of the applicable Consumer Guarantees cannot be, and are not in this Licence, excluded, restricted or

modiﬁed; or

(b) in Australia (or if Consumer Guarantees are otherwise conferred in relation to goods and services by Australian

law), where the goods or services are not PDH Goods or Services, Licensor limits its liability for a failure to comply

with any Consumer Guarantee (other than where to do so would otherwise cause all or part of this clause to be void)

to (at Licensor's option): (i) in the case of goods, repairing or replacing the goods or paying the cost of having the

goods repaired or replaced; and (ii) in the case of services, re-supplying the services or paying the cost of having the

services re-supplied, and Licensor does not exclude or limit the operation of the Consumer Guarantees under any

other provision of this Licence or in any other manner and you agree it is fair and reasonable in all the circumstances

for Licensor's liability to be so limited.

To the extent permitted by law and except for the Consumer Guarantees, Licensor excludes from this Licence all

representations, guarantees, conditions, warranties, rights, remedies, liabilities and other terms that may be conferred

or implied by statute, general law or custom, in fact or otherwise, except any guarantee, implied term or right

conferred under any legislation (including the Australian Consumer Law and the New Zealand Consumer Guarantees

Act 1993), the exclusion of which would contravene legislation or cause part or all of this clause to be void.

7.4 Business Supplies in New Zealand

In New Zealand, where both Licensor and Customer are ‘in trade’ and Customer is acquiring the goods and services

for the purposes of a business, then both Licensor and Customer acknowledge and agree that the statutory

guarantees and implied terms, covenants and conditions contained in the New Zealand Consumer Guarantees Act

1993 are excluded to the fullest extent permitted by law and do not apply, and Licensor does not exclude or limit the

operation of the Consumer Guarantees under any other provision of this Licence or in any other manner and you

agree it is fair and reasonable in all the circumstances for Licensor's liability to be so limited.

7.5 Limitation of Liability – General.

To the extent permitted by law and except for any liability under the Consumer Guarantees: (a) the Licensor will not,

under any circumstances, be liable under the law of tort, contract, or otherwise for any loss of proﬁts or loss of data

or any indirect or consequential loss or damage, however caused, arising out of or in connection with this Licence;

(b) the Licensor's aggregate liability for all claims arising out of or in connection with this Licence will be limited to the

total amount actually and originally paid at retail by the customer for the Licensed Product; and (c) without limiting

the foregoing or any other limitation of liability or disclaimer contained in this Software Licence and Privacy Notice,

all limitations and disclaimers contained in the product warranty or any limited warranty for any product sold in

connection with the Licensed Product also apply to this Licence.

8. Termination.

Licensor may, in addition to any other remedies available to Licensor, terminate this Licence immediately if Customer

breaches any of its obligations under this Licence.

9. Product warranty.

The warranty for the Licensed Product is set out in the warranty documentation provided with the Licensed Product

or the device on which the Licensed Product is installed (subject to any exclusions and limitations set out in this

document), and applies in addition to this Licence and to any rights that you have under the Consumer Guarantees.

10. Governing Law and interpretation.

Where the Licensed Product was acquired by the original retail purchaser in Australia, this Licence is governed by

the laws of New South Wales, the parties submit to the non-exclusive jurisdiction of the courts of New South Wales.

Where the Licensed Product was acquired by the original retail purchaser in New Zealand, this Licence is governed

by the laws of New Zealand, the parties submit to the non-exclusive jurisdiction of the courts of New Zealand. The

term "Navman" refers to MiTAC Australia Pty Ltd of Unit 5, 43-51 College Street, Gladesville, NSW 2111, Australia.

contravene that statute or (b) cause any part of this clause to be void.

Where you as a Consumer acquire goods and services to which this warranty relates:

(a) subject to clause 6.3, in Australia or New Zealand, where the goods or services are PDH Goods or Services, the

operation of the applicable Consumer Guarantees cannot be, and are not in this warranty, excluded, restricted or

modiﬁed; or

(b) in Australia (or if Consumer Guarantees are otherwise conferred in relation to those goods and services by

Australian law), where the goods or services are not PDH Goods or Services, Navman limits its liability for a failure

to comply with any Consumer Guarantee (other than where to do so would otherwise cause all or part of this

clause to be void) to (at Navman's option): (i) in the case of goods, repairing or replacing the goods or paying

the cost of having the goods repaired or replaced; and (ii) in the case of services, re-supplying the services or

paying the cost of having the services re-supplied, and Navman does not exclude or limit the operation of the

Consumer Guarantees under any other provision of this warranty or in any other manner and you agree it is fair

and reasonable in all the circumstances for Navman's liability to be so limited.

6.3. Business Supplies in New Zealand

In New Zealand, where both Navman and you are ‘in trade’ and you are acquiring the goods and services for the

purposes of a business, then both Navman and you acknowledge and agree that the statutory guarantees and implied

terms, covenants and conditions contained in the New Zealand Consumer Guarantees Act 1993 are excluded to the

fullest extent permitted by law and do not apply, and Navman does not exclude or limit the operation of the Consumer

Guarantees under any other provision of this warranty or in any other manner and you agree it is fair and reasonable in

all the circumstances for Navman's liability to be so limited.

7. Disclaimers and Other Provisions

To the extent permitted by law and except for the Consumer Guarantees and the warranty described above, Navman

excludes all representations, guarantees, conditions, warranties rights and remedies, liabilities and other terms that

may be conferred or implied by statute, general law or custom, in fact or otherwise except any guarantee, implied

term or right conferred under any legislation (including the Australian Consumer Law and the New Zealand Consumer

Guarantees Act 1993), the exclusion of which would contravene legislation or cause part or all of this clause to be void

and the customer acknowledges that Navman does not warrant that the operation of the product will be continuous or

error-free.

Except for liability for a breach of a Consumer Guarantee (a) Navman will not, under any circumstances, be liable

under the law of tort (including negligence), contract, or otherwise for any loss of proﬁts or loss of data or any indirect

or consequential loss or damage, however caused, arising out of or in connection with the product; (b) Navman’s

aggregate liability for all claims arising out of or in connection with the product will be limited to the total amount

actually and originally paid at retail by the customer for the product.

8. Privacy Notice

We collect the personal information you provide when you obtain this warranty and if you make a warranty claim to

provide the warranty and any warranty service. We collect this information either directly from you or from the agent

which handles our warranty claims.

We may disclose your personal information to: (i) the agent which handles our warranty claims; (ii) our related

companies, our employees and agents; (iii) anyone required or authorised by law; and (iv) anyone else you authorise.

These recipients may be located overseas including in Australia, New Zealand, Taiwan, the USA, China and the

Philippines.

Our policy on the collection, use and disclosure of your personal information is set out in our Privacy Policy available

at http://www.navman.com.au/Privacy_Policy.aspx. Our policy contains details about how to access or correct the

personal information we hold and how to complain about a privacy breach and how we will handle such a complaint.

9. Disclaimer

In the event of improvements to the product, and software, or in limited circumstances where events occur outside

Navman's control, speciﬁcations and documents may be subject to change without notice. While Navman has taken

reasonable care to ensure the accuracy of this document, due to circumstances outside of Navman's control, Navman

cannot warrant this document is at all times error-free.

10. Notes

Not all models are available in all regions. Depending upon the speciﬁc model purchased, the colour and look of

your device and accessories may not exactly match the graphics shown in this document. The screenshots and

other presentations shown in this document are for reference only. They may differ from the actual screens and

presentations generated by the actual product.

5 6 1 5 N 5 8 3 0 0 0 8 R 0 1

Getting to know your dash cam

Note: The screenshots and other presentations shown in this manual may differ from the ones generated by the

actual product.

8 9

1 Mini-USB connector

2 Device mount socket

3 LCD screen

4 System indicator

5 Microphone

6 Memory card slot

7 Shutdown button

8 Camera lens

9 Speaker

Power button ( ) / Function keys

Power button

Press and hold for 2 seconds to manually turn the dash cam on and off.

Function keys

The device provides four function keys to control the corresponding icons displayed on the LCD screen. The keys'

functions may vary on different screens.

Manually starts an event recording.

Enters Parking mode.

Opens the Menu screen.

(Recording screen)

Moves to the next option.

Acts as the ENTER button.

Moves to the previous option.

Acts as the BACK button.

(Menu screen)

Setting the date and time

To make sure that the date and time of your recordings are correct, check the settings before you begin recording.

1. Press > .System > Date / Time

2. Do one of the following:

l Select , and Use GPS time

then set the time zone of your location and set the daylight saving time. The

system will set the date and time according to the GPS location.

l Select Manual, and the system will display the date and time setting screen. Use / to adjust

the value of the selected ﬁeld; press and repeat the step until all ﬁelds have been changed. When

completed, press .

Recording in driving mode

Continuous recording

By default, the system will automatically begin with continuous recording in a few seconds after start-up. The

System indicator ﬂashes in green and amber alternately while the recording is in progress.

The recording may be divided into several video clips; recording will not stop between video clips. When your

memory card ﬁlls up with continuous recordings in the "Normal" category, it will automatically record over the

oldest existing ﬁles in this category.

When continuous recording is in progress, you can manually stop recording by pressing . Press to

return to the recording screen; the system will start continuous recording automatically.

The continuous recordings can be found in the “Video” category for ﬁle playback.

Event recording

Note: The system will automatically calibrate the G sensor of the device during start-up. If the device's viewing

angle or installation position has been changed from the original position after start-up, please turn the device off

and on again to recalibrate the G sensor. Otherwise, it may cause the G sensor to malfunction and impact the event

recording feature of the device.

By default, if an event happens such as a sudden impact, high speed driving, an aggressive turn or an accidental

crash during continuous recording, the G sensor will prompt the dash cam to start recording the event. You can

change the sensitivity level of the G sensor by selecting .> Video Recording > G-Sensor Sensitivity

The event recording saves the duration from 3 seconds before the event until 17 seconds after the event. The

event recording can last up to 1 minute if the sensor is triggered again during the recording. When your memory

card ﬁlls up with event recordings in the "Event" category, it will automatically record over the oldest existing ﬁles in

this category.

If you want to manually start an event recording while continuous recording is in progress, press the Event button

( ).

The event recordings can be found in the “Event” category for ﬁle playback.

Using a memory card

You must insert a memory card (not supplied) before you can start recording.

The dash cam supports Class 10 memory cards with 8 GB – 128 GB capacity.

Hold the card by the edges and gently insert it into the slot as shown in the

illustration. To remove a card, gently push the top edge of the card inwards to

release it and pull it out of the slot.

Formatting a card

If you need to format a memory card (all data will be erased), press > .Format

Note:

l DO NOT apply pressure to the centre of the memory card.

l Navman does not guarantee the product’s compatibility with memory cards from all manufacturers. Please

check your card manufacturer's speciﬁcations and warranty to ensure it is suitable for use in dash cameras and

loop recording devices.

l Before you start recording, please format the memory card to avoid malfunction caused by ﬁles not created by

the dash cam.

l You may need to format your memory card periodically to ensure it remains in good condition to record and

save ﬁles.

l You are advised to turn the device off before removing the memory card.

Turning the dash cam on

Complete the installation according to the instructions in the “Using your dash cam in a vehicle” section. Once the

vehicle engine is started, the dash cam automatically turns on. The System indicator glows in green when the dash

cam is powered.

Shutting down the dash cam

Occasionally you may need to perform a hardware reset when the dash cam stops responding or if it appears to

be “frozen” or unresponsive. To shut down the dash cam, press and hold the Power button ( ) until the system

powers off.

If the system does not turn off by keeping the Power button pressed, you can

force it to shut down by inserting a small rod (such as a straightened paper clip)

into the Shutdown button of the device.

System icons

Various system icons on the status bar at the top of the screen provide the status information of your device. The

displayed icons will vary depending on your device model and state.

1 Recording indicator

2 Current time

3 Microphone status

4 GPS signal status

5 Current GPS car speed

1 2 4

Using your dash cam in a vehicle

Note:

l To ensure the highest quality recordings, you are advised to place the dash cam near the rear-view mirror.

l Select an appropriate location for mounting the device in a vehicle. Never place the device where the driver’s

ﬁeld of vision is blocked.

l If the car’s windscreen is tinted with a reﬂective coating, it may be athermic and impact the GPS reception. In this

instance, please mount your device where there is a “clear area.”

l The system will automatically calibrate the G sensor of the device during start-up. If the device's viewing angle or

installation position has been changed from the original position after start-up, please turn the device off and on

again to recalibrate the G sensor. Otherwise, it may cause the G sensor to malfunction and impact other features

of the device (such as the event recording and the Parking mode features).

l The dash cam is designed to stay connected with the vehicle power adapter to ensure optimal performance.

The battery is designed as a backup power source for short-term use only in the event when the vehicles power

system is cut out during an incident so the dash cam can save the last recording. It is not to be used as a sole

source of power for prolonged periods.

Make sure that your car is parked on level ground. Follow the instructions to securely mount your dash cam and rear

camera into a vehicle.

1. Before attaching the device mount to the windscreen, it is recommended to clean the windscreen with rubbing

alcohol and make sure that the installation area is free of dust, oil and grease.

2. When adjusting the angle of mounting, make sure

that the camera’s view is parallel with the level

ground and the ground/sky ratio is close to 6/4.

3. Connect the vehicle power adapter to the cigarette

lighter. Route the cables through the top ceiling

and the A-pillar so that it does not interfere with

driving. Make sure that the cable installation does

not interfere with the vehicle's airbags or other safety

features.

Note: The installation illustrations are for your

reference only. The placement of the devices and

cables may vary depending on the vehicle model.

If you encounter any problems during installation,

contact a skilled installer (such as the service

personnel of the vehicle) for assistance.

Parking mode

Note:

l The dash cam cannot operate the Parking mode function on the internal battery power. It requires an additional

power source to record the video during the Parking mode, such as an uninterruptible power cable or Smart Box

accessory which is sold separately. Visit www.navman.com.au to purchase this accessory.

l The system will automatically calibrate the G sensor of the device during start-up. If the device's viewing angle or

installation position has been changed from the original position after start-up, please turn the device off and on

again to recalibrate the G sensor. Otherwise, it may cause the G sensor to malfunction and impact the Parking mode

feature of the device.

The Parking mode is disabled by default. Before enabling Park mode, please check your device memory storage

allocation. Go to to set a proper allocation for parking recording. Changing the > System > Storage Allocation

allocation will erase the contents on the memory card, so save any videos or photos to your computer ﬁrst.

You can enable the function by selecting > Parking Mode > Detection > On. (The icon will appear on

the screen.) When the Parking mode detection is enabled, the system will enter the Parking mode when the car stops

moving for about 5 minutes. When movements or vibrations are detected during the Parking mode, the system will save

the duration from 3 seconds before the event until 17 seconds after the event. The saved recording can last up to 1

minute if the sensor is triggered again during the recording. When your memory card ﬁlls up with parking recordings in

the "Parking" category, it will automatically record over the oldest existing ﬁles in this category.

Note:

l You can press to manually enter the Parking mode while continuous recording is in progress.

l The parking recording is triggered by the G sensor and motion detection of the device. You can change the

conﬁguration by selecting > Parking mode Motion Detection G-Sensor Sensitivity > and .

To exit the Parking mode (the system will resume continuous recording), press . You will be prompted to play the

saved parking recording (if available).

The parking recordings can be found in the “Parking” category for ﬁle playback.

Camera mode

The dash cam allows you to take a photo: press > > Camera .

The photos can be found in the “Photo” category for ﬁle playback.

Playback mode

To select a video or photo for playback:

1. Press .> File Playback

2. Select the desired type.

3. Press / to select the desired ﬁle from the list and then press to start playback.

4. During playback, you can:

l While playing videos, press / to play the previous/next video.

l While viewing photos, press / to display the previous/next photo.

l Press to return to the list.

l Press to display the pop-up menu to select:

l Play/Pause: Starts or pauses the playback.

l Move to Event: Moves the ﬁle to the “Event” category.

l Transfer to phone: Uploads the selected video/photo to your smartphone.

l Delete: Deletes the ﬁle.

Getting connected

MiVue Pro app

The MiVue Pro app allows you to view, share and back up the videos recorded on a MiVue dash cam via WIFI.

Search for "MiVue Pro" in Apple App Store or in Google Play Store to download the app for free.

Note:

l The MiVue Pro app is compatible with iOS 9.0 (and above) and Android 5.0 (and above) devices. Navman does

not guarantee the product’s compatibility with smartphones from all manufacturers.

l Not all MiVue dash cam models support the MiVue Pro app or all its features.

Setting up a WIFI connection

On your dash cam, press > > to enable the WIFI mode. Once enabled, the WIFI setting screen WIFI On

displays the SSID and password of the dash cam.

Follow the steps to set up the WIFI connection between the dash cam and the smartphone via the MiVue Pro app.

1. Make sure that you have enabled the WIFI function on the smartphone.

2. Open the MiVue Pro app and tap the "+" icon.

3. Tap Select WIFI and then select the dash cam you want to connect to.

4. Tap Done to complete the WIFI connection.

Note:

l The instructions about operating the smartphone are for reference only. The actual setting options and methods

may vary depending on your phone type/model and the app version.

l The WIFI connection between your Navman device and smartphone is not Internetenabled.

You can check the WIFI connection status by the WIFI icon on the dash cam.

The dash cam is connected to the smartphone and paired with the MiVue Pro app.

The dash cam is not connected to the smartphone.

The dash cam is connected to the smartphone but not paired with the MiVue Pro app yet.

On your smartphone, open the MiVue Pro app and keep it awake. You can now transfer videos by pressing the Event

button ( ).

Over-the-air (OTA) update

Occasionally, Navman may offer you various software updates, including the device ﬁrmware and safety camera

data. You can upgrade the data via OTA updates of the MiVue Pro app. When the new data is available, you will be

asked to upgrade the data when you open the app. Follow the on-screen instructions to complete the update.

For more information on the MiVue Pro app features, refer to the separate MiVue Pro App Quick Start Guide.

System settings

To customise the system settings, press .

l File Playback

Plays the recorded videos and photos.

l Camera

Press to enter Camera mode.

l WIFI

Enables or disables the WIFI mode of the dash cam.

l Sound Recording

Sets if you want to include sounds in the recordings.

l Driving Safety

The dash cam provides advanced driving safety functions to make your driving safer.

l Headlight Reminder: The system will remind you to turn the lights on when you are driving after dark.

l Driver Fatigue Alert: 2 hoursThe system will remind you to take a break for a long-distance drive ( ,

3 hours 4 hours or ).

l Parking mode

Allows you to change the settings of Parking mode. The available settings include:

l Detection: When enabled, the dash cam will automatically start recording when it detects movements or if

an event happens in Parking mode.

l Detection Method: Only G-sensor Only MotionSets the parking detection method to , or Both

Motion & G-sensor.

Note: The G Sensor detection method is based on any physical movements/vibrations of the vehicle

detected by the Gravity Sensor; the Motion detection method is based on any movement in the ﬁeld of view

of the front camera.

l , ,Auto Entry: Sets the level (Low Medium High or Manual) for the G sensor to activate the Parking

mode. For example, when the option is set to , the G sensor will have a low sensitivity and the system will Low

enter the Parking mode much easier.

l Motion Detection: Sets the sensitivity level of motion detection that triggers the system to save the

parking recording.

l G-Sensor Sensitivity: Sets the sensitivity level of the G sensor that triggers the system to save the parking

recording.

l Video Recording

Changes the settings of recording, including:

l Video Clip Length: Sets the length of each video clip for a continuous recording.

l WDR: Enables the Wide Dynamic Range (WDR) function to improve the dash cam's image quality under

high-contrast lighting conditions.

l EV: Sets the proper exposure level to adjust the brightness of the image.

l Frequency: Sets the frequency for the camera to avoid problems caused by artiﬁcial light sources that are not

constant.

l G-Sensor Sensitivity: Sets the sensitivity level of the G sensor that triggers the event recording during

continuous recording.

l Stamps: Sets the information ( or ) that will be displayed on the recorded video.Coordinates G-Sensor

l Speed Stamp: Displays the driving speed on the recorded video.

l Text Stamp: Displays the customised information on the recorded video.

l System

Allows you to change the system settings of the device.

l Satellites: Displays the status of GPS signal reception.

l Date/Time: Sets the system date and time.

l System Sound: Enables or disables system notiﬁcation sounds.

l Volume: Adjusts the volume level.

l LCD Standby

l Always On: Keeps the LCD on.

l HUD: Turns off the LCD but still display the time and speed information.

l 10 sec/1 min/3 min: Sets the timer for the LCD to turn off automatically after recording starts.

l Language: Sets the language.

l Distance Unit: Sets the preferred distance unit.

l Storage Allocation: The system provides the default memory conﬁgurations to store the videos and photos.

Select the proper conﬁguration based on your usage.

l Restore to Defaults: Restores system settings to factory defaults.

l Version: Displays the software information.

l Format

Formats a memory card. (All data will be erased.)

MiVue Manager

MiVue Manager™ is a tool for you to view the videos recorded on a MiVue™ dash cam.

Note: Not all features are available for every model.

Installing MiVue Manager

Download the Setup ﬁle from https://www.navman.com.au/mapping/ or https://www.navman.co.nz/mapping/.

Double-click Setup.exe and follow the on-screen prompts to install MiVue Manager.

IMPORTANT! You may be prompted to install the MOV and AVI codecs for video playback if they are missing on your

computer. Search online to install the required codecs.

Playing the recording ﬁles

1. Remove the memory card from the dash cam and access the card on the computer via a card reader; or connect

the dash cam to your computer via a USB cable (not supplied). You are advised to copy the recording ﬁles to your

computer for backup and playback.

2. Start MiVue Manager on the computer.

l By default, MiVue Manager shows the calendar and the ﬁle list on the right.

l When a recording ﬁle exists, you will see the date marked with “ ”. Click that date to display the ﬁles that

were recorded on that date.

l You can choose the ﬁle type to display: / / .Event Normal Parking

l To display all ﬁles in the current folder, click . To return to the calendar view, click .All Calendar

Note: Your model may not support all ﬁle types.

3. Double-click the desired ﬁle on the ﬁle list to start playback.

4. The playback controls are described as follows:

1 2 3 4 5 6 7

1 Skips to the previous/next ﬁle on the list.

2 Starts or pauses the playback.

3 Changes the playback speed to 1/4x, 1/2x, 1x (default), 1.5x, or 2x.

4 Mutes or unmutes the volume.

5 Adjusts the volume level.

6 Plays the video in full screen.

7 Displays the playback progress. You can click on a point along the track bar to move directly to a different

location for the playback.

5. During playback, you can check more driving information from the dashboard panel and the G sensor chart

that are displayed below the video playback screen.

l On the dashboard panel, click to display the map screen.

Note: The map screen may not display when the computer is not connected to the Internet or when your

MiVue model does not support the GPS function.

l G sensor chart displays data in 3-axis waveform about the car’s shift forward/backward (X), to the right/left

(Y) and upward/downward (Z).

6. The tool bar allows you to do the following:

1 2 3 4 5 6 7

1 Selects the folder that stores the recording ﬁles.

2 Previews and prints the current video image.

3 Saves the selected ﬁles to the speciﬁed location on your computer.

4 Captures and saves the current video image to the speciﬁed location on your computer.

5 Opens the Settings Menu. The Settings items are described as follows:

l Sets the display language of MiVue Manager.Change Language:

l Sets the colour scheme of MiVue Manager.Change Skin:

l Checks if there is any new version of MiVue Manager. Internet access is Check for Update:

required for this feature.

l Displays the version and copyright information of MiVue Manager.About:

6 Exports the GPS information of the selected ﬁle in the KML format to the speciﬁed location on your

computer.

7 Uploads the selected ﬁle to YouTube™.

Product specificaties

Merk:	Navman
Categorie:	Dashcam
Model:	MiVue 750

Heb je hulp nodig?

Als je hulp nodig hebt met Navman MiVue 750 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Dashcam Navman

Navman MiVue WORKMATE XDC Handleiding

7 Juli 2023

Navman MiVue ALTA Handleiding

6 Juli 2023

Navman MiVue ALTA DC Handleiding

1 Juli 2023

Navman FOCUS450 Dual Handleiding

11 Juni 2023

Navman MiVue Stealth Handleiding

27 Maart 2023

Navman MiVue Speedocam DC Handleiding

17 Maart 2023

Navman MiVue 750 Handleiding

2 Maart 2023

Navman MiVue 800 Handleiding

12 November 2022

Navman MiVue 700 Handleiding

30 Oktober 2022

Navman MiVue 755 Handleiding

27 Oktober 2022

Handleiding Dashcam

Nieuwste handleidingen voor Dashcam

Hikvision AE-DC5113-F6S Handleiding

18 December 2024

Hikvision AE-DC5013-F6 Handleiding

18 December 2024

Hikvision AE-DC8322-G2PRO Handleiding

18 December 2024

Rexing RoadMate CPDuo Handleiding

16 December 2024

Rexing V3 Handleiding

16 December 2024

Rexing V1P Gen 3 Handleiding

16 December 2024

Rexing RH2-3 Handleiding

16 December 2024

Rexing M4-4 Handleiding

16 December 2024

Rexing M2-4CH Handleiding

16 December 2024

Rexing MTC1 Handleiding

16 December 2024