Navilock NL-8012U Handleiding

Navilock GPS apparaat NL-8012U

Lees hieronder de 📖 handleiding in het Nederlandse voor Navilock NL-8012U (11 pagina's) in de categorie GPS apparaat. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/11

NL-8012U u-blox 8 multi GNSS USB receiver 4.50 m

Operation manual (62524)

1. Introduction

The NL-8012U is a USB GNSS receiver with an internal antenna and a u-blox 8 multi GNSS

chipset. The USB port enables the connection with a notebook, UMPC, tablet / car PC.

Thanks to its compact design and its high sensitive chipset, it is the ideal companion at work and

at leisure.

1.1. Contents*

1x Navilock NL-8012U

1x 8cm CD ROM including operation manual

* Before using the device, please make sure that all the parts are included in the package. If any

parts are missing or damaged, please contact your dealer immediately.

Important health and safety information

When using this product, take the following precautions in order to avoid possible damages and legal consequences. Always

follow all safety and operation manuals exactly and keep them for future reference. Observe all warnings in the operation manual

and on the product. In order to avoid injuries, electrocution, fire and damages to the product, observe the following precautions:

ELECTRIC SECURITY

This product is designed for operation with power supply via the USB port. Any other operation mode can be dangerous and may

void the warranty claims for this product. This unit contains an internal back-up battery.

NOTE: RECYCLE OR DISPOSE OF USED BATTERIES OR RECHARGEABLE BATTERIES IN

ACCORDANCE WITH ALL APPLICABLE REGULATIONS AND THE INSTRUCTIONS

INCLUDED WITH THE PRODUCT.

PRECAUTIONS REGARDING DIRECT SUNLIGHT

Make sure the unit is not exposed to very high humidity and temperatures. Never leave the unit, the battery or the rechargeable

battery for an extended period in a vehicle or plate, where the temperature can increase to over 60°C (140°F), for example on the

dashboard of a car, the window sill or behind a pane of glass, which is directly exposed to the sun or very strong UV light.

Otherwise the unit or the vehicle may be damaged, and the battery or the rechargeable battery may overheat.

Damages requiring repairs

Disconnect the unit from the AC supply in the following cases; also disconnect the rechargeable battery and contact an

authorized repair man or your dealer.

• Liquid or an object has entered the product.

• The product has fallen down or was damaged.

• There are visible signs of overheating.

• When operated normally, the product does not function flawlessly.

Avoid using the unit directly after strong temperature changes.

If the unit is exposed to strong temperature and humidity fluctuations, condensation can form in the unit. In order to avoid damage

to the unit, please wait until the condensation has dried off before using the unit.

NOTE: If you bring the unit from a cold to a warm environment, or vice versa, first let it get

accustomed to the new temperature before turning it on.

2. Starting operation

2.1.

Microsoft Windows

Plug the USB cable in a free USB port on your notebook etc. The NL-8012U will be

recognized by your Windows operating system, which will attempt to install a driver. Abort

this process, and start “ u-center 8.xx Installer.exe ” from the CD-ROM, or download the

driver from the Navilock website. Follow the installation instructions. After the installation

is completed, restart your computer. Then the GNSS COM port will be available in the

device manager under connections. Set this port in your navigation or route planner

software. Do not use another program that accesses this port at the same time.

3. LED indicator

This GNSS receiver doas have LED indicator!

White lights: USB connection on

White flashes: GNSS satfix

4. Application environment

The NL-8012U can be used as a USB GNSS receiver under Windows Vista/7/8. The

corresponding Microsoft Windows driver is available on the CD-ROM.

5. Functional test and GNSS system selection with u-center 8.xx in MS Windows

1. Load u-center software from:

http://www.navilock.de/produkte/G_62524/software.html?setLanguage=en. Install the

software on your unit. Select the version suitable for your system. U-center is a pure test

program and cannot be used for navigation or orientation. It must always be closed after the

test. It blocks the COM port and does not allow any access of the navigation or route

software to the COM port. It also serves for updating the Assist GNSS data and other

configuration switches as SBAS properties.

If the NMEA protocol is displayed in u-center, but you cannot find a receiver in the application

software, the connection problem is not with the receiver, but with the selected software setting.

In this case, the software manufacturer support center may be able to help you.

Product specificaties

Merk:	Navilock
Categorie:	GPS apparaat
Model:	NL-8012U
Kleur van het product:	Zwart
Gewicht:	- g
Breedte:	65 mm
Diepte:	45 mm
Hoogte:	2 mm
LED-indicatoren:	Ja
USB-connectortype:	USB Type-A
Aantal USB 2.0-poorten:	1
Interface:	USB
Frequentie:	1575.42 MHz
Oplaadbaar:	Nee
Gevoeligheid:	- dBmW
Aantal kanalen:	- kanalen
Antenne:	Intern
Acquisitietijden - koud:	26 s
Acquisitietijden - warm:	- s
WAAS ontvangst:	Ja
Navigatie protocollen:	GGA, GSA, GSV, RMC, VTG
Acquisitietijden - heet:	1 s
Navigation signals supported:	L1