Navilock NL-602U Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Navilock NL-602U (13 pagina's) in de categorie GPS apparaat. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/13
NL-602U ublox6 USB receiver
Operation manual (61840)
1. Introduction
The USB 2.0 GPS Receiver based on u-blox 6 SuperSense® chipset and it has a built-in
antenna for high sensitivity. Besides GPS, this u-blox 6 chipset enables you in future to receive
also Galileo, the european navigationsystem.
You can use this GPS Receiver with a Notebook and a suitable routing software for navigation.
1.1. Contents*
1 x Navilock NL- 602U
1 x 8 cm CD ROM including operation manual
* Before using the device, please make sure that all the parts are included in the package. If any
parts are missing or damaged, please contact your dealer immediately.
Important health and safety information
When using this product, take the following precautions in order to avoid possible damages and legal consequences. Always
follow all safety and operation manuals exactly and keep them for future reference. Observe all warnings in the operation manual
and on the product. In order to avoid injuries, electrocution, re and damages to the product, observe the following precautions:
ELECTRIC SECURITY
This product is designed for operation with power supply via the USB port. Any other operation mode can be dangerous and may
void the warranty claims for this product. This unit contains an internal back-up battery.
NOTE: RECYCLE OR DISPOSE OF USED BATTERIES OR RECHARGEABLE BATTERIES IN
ACCORDANCE WITH ALL APPLICABLE REGULATIONS AND THE INSTRUCTIONS
INCLUDED WITH THE PRODUCT.
PRECAUTIONS REGARDING DIRECT SUNLIGHT
Make sure the unit is not exposed to very high humidity and temperatures. Never leave the unit, the battery or the rechargeable
battery for an extended period in a vehicle or plate, where the temperature can increase to over 60°C (140°F), for example on the
dashboard of a car, the window sill or behind a pane of glass, which is directly exposed to the sun or very strong UV light.
Otherwise the unit or the vehicle may be damaged, and the battery or the rechargeable battery may overheat.
Damages requiring repairs
Disconnect the unit from the AC supply in the following cases; also disconnect the rechargeable battery and contact an
authorized repair man or your dealer.
Liquid or an object has entered the product.
The product has fallen down or was damaged.
There are visible signs of overheating.
• When operated normally, the product does not function flawlessly.
Avoid using the unit directly after strong temperature changes.
If the unit is exposed to strong temperature and humidity uctuations, condensation can form in the unit. In order to avoid damage
to the unit, please wait until the condensation has dried o before using the unit.
NOTE: If you bring the unit from a cold to a warm environment, or vice versa, first let it get
accustomed to the new temperature before turning it on.
2. Starting operation
2.1. Plug the USB cable in a free USB port on your notebook etc. The NL-602U will be
recognized by your Windows operating system, which will attempt to install a driver. Abort this
process, and start u-center_6.01_Installer.exe -ROM, or download the driver from the CD
from the Navilock website. Follow the installation instructions. After the installation is
completed, re-start your computer. Then the GPS COM port will be available in the Device
Manager under Connections. Set this port in your navigation or route planner software. Do not
use another program that accesses this port at the same time.
3. LED indicator
Flashes, with Satx
Lights, without Satx
3. Application environment
The NL-602U can be used as a USB GPS receiver under Windows 2000/XP/Vista/7. The CE/
corresponding driver is available on the CD-ROM.
The operation under Linux Kernel 2.6.x will be explained in the description on the CD.
Furthermore you will nd a driver for Windows 7 Sensor and Location API on the CD.
4. Functional test with u-Center 6.xx
1. Install the u-Center software on your unit. Select the version suitable for your
system. U-Center is a pure test program and cannot be used for navigation or
orientation. It must always be closed after the test. It blocks the COM port and does not
allow any access of the navigation or route software to the COM port. It also serves for
updating the Assist GPS data and switching to EGNOS.
If the NMEA protocol is displayed in u-Center, but you cannot nd a receiver in the application
software, the connection problem is not with the receiver, but with the selected software setting.
In this case, the software manufacturer support center may be able to help you.


Product specificaties

Merk: Navilock
Categorie: GPS apparaat
Model: NL-602U

Heb je hulp nodig?

Als je hulp nodig hebt met Navilock NL-602U stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding GPS apparaat Navilock

Handleiding GPS apparaat

Nieuwste handleidingen voor GPS apparaat