Nanuk 945 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Nanuk 945 (16 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 249 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
Care and Use Guide
Guide d’entretien et d’utilisation
Guía de uso y precauciones
| English p2
| français p6
| español p10
Warranty Information
Thank you for purchasing this NANUK case.
Please read the directions below to learn how to properly use and care for your case.
O-ring seal
Your NANUK case is equipped with an EPDM gasket that has been designed to give superior performance and resist compressive deformation over time. To ensure
a watertight seal, the gasket must be free of cuts, abrasions or tears. Debris or foreign material caught between the sealing rib on the bottom of the case and the
gasket on the top of the case will prevent the case from sealing properly. Applying a coat of an automotive type surface protector is recommended to help prevent
dirt and debris from sticking to the seal. If the seal becomes damaged a replacement seal can be ordered from Plasticase.
Cleaning
All NANUK cases are constructed of high impact NK-7 resin designed to absorb the shocks of transport. The surfaces of the case can easily be wiped clean with
a non-abrasive cleaner approved for use on plastic. Avoid using brushes that could scratch the case. To keep your case looking like new we recommend using an
automotive type surface protector.
Auto pressure equalizer
All NANUK cases are equipped with an automatic pressure release valve. This valve automatically equalizes the pressure on the inside of the case. To ensure correct
operation, this valve does not require any maintenance, does not need to be rotated or adjusted, and must not be blocked.
Care and Use
2
3
Press down on the sliding button in the middle
of the lower latch.
Hold the button down and pull the lower latch
towards you to release the compressive force.
Release the button and continue pulling on the
lower latch until it reaches the end of its travel.
Release the lower latch and the upper latch
should disengage; The case can now be opened.
If the latch does not disengage automatically,
press down on the lid and the latches will fall
open. This may be required when the case is
heavily loaded.
Pull the lower latch upwards until you can
engage the upper latch onto the lid of the case.
Once the upper latch is engaged, push
downward on the lower latch until the locking
button engages with the lower half of the case.
An audible click will indicate that the latch is
securely closed. If the latch is in the closed
position but the button does not return to the
locked position, ensure that there are no foreign
objects or debris that are preventing the button
from engaging into the locked position.
Pull the lower latch upwards until you can
engage the upper latch onto the lid of the case.
Once the upper latch is engaged, push
downward on the lower latch until the locking
button engages with the lower half of the case.
An audible click will indicate that the latch is
securely closed. If the latch is in the closed
position but the button does not return to the
locked position, ensure that there are no foreign
objects or debris that are preventing the button
from engaging into the locked position.
Opening Closing
1 1
2 2
3
3
Powerclawâ„¢ latches


Product specificaties

Merk: Nanuk
Categorie: Niet gecategoriseerd
Model: 945

Heb je hulp nodig?

Als je hulp nodig hebt met Nanuk 945 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Nanuk

Nanuk

Nanuk 903 Handleiding

7 Augustus 2023
Nanuk

Nanuk 945 Handleiding

20 Februari 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd