NANO Modules ALT Handleiding


Lees hieronder de šŸ“– handleiding in het Nederlandse voor NANO Modules ALT (7 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 241 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
ALT
Quick guide
Thank you for choosing ALT Quad VCA
for your Eurorack System.
Powering up
Turn off the power of your modular synthesizer.
Double check the power cord polarity. If you plug the module backwards you might
damage its electronic circuits.
If you ļ¬‚ip over your ALT Quad VCA, you will ļ¬nd the ā€œREDā€ mark at the PCB power
connector, which must match the colored line on the ribbon cable.
Once you have checked all the connections, you can turn on your modular system.
If you notice any anomalies, turn your system off right away and check again your
connections.
1.
2.
3.
4.
NANO Modules - ValĆØncia 2019 Ā©
Description
ALT is a Quadruple Voltage-Controlled Ampliļ¬er, which is an electronic device
that uses electric power to vary the amplitude of a signal applied to its input
terminals, producing a signal proportional to the control voltage at its output.
The amount of ampliļ¬cation provided by an ampliļ¬er is measured by its , which gain
is the ratio of output voltage, current, or power to input. There is no signal processing
in a VCA, just overall volume control.
ALT has 4 channels of voltage controlled ampliļ¬ers:
ā€¢ VCAs 1, 2, 3. Each one is equipped with a GAIN control, and a CV IN Attenuverter.
ā€¢ VCA 4. GAIN CV IN and the signal normalled to +5V (fully open VCA).
Additionally, the outputs of these channels are cascaded from left to right, allowing
ALT to behave as a four-channel mixer.
REDRED
ALT
Layout
This image will clarify the function of each of the elements of the module.
NANO Modules - ValĆØncia 2019 Ā©
ALT
VCA 1
VCA 2
VCA 3
1 2 3 4
CV1 CV2 CV3 CV4
ALT
1 2 3 4
+-
CV2
+-
CV1
+-
CV3
Signal Inputs
Gain
Signal Level Control
CV Level
Attenuverter
CV Input Control
Level Indicator
Signal Outputs
Each output is normalled to the
mix input of the adjacent one.
CV4 Input
VCA 4
This VCA can be
controlled by CV4 Input.
Signal Gain Control.
This CV input is normalled
to 5V (fully open VCA).
Signal Gain Control.
CV 1,2,3 Inputs


Product specificaties

Merk: NANO Modules
Categorie: Niet gecategoriseerd
Model: ALT

Heb je hulp nodig?

Als je hulp nodig hebt met NANO Modules ALT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd NANO Modules

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd