MuxLab 500727 Handleiding

MuxLab Receiver 500727

Lees hieronder de 📖 handleiding in het Nederlandse voor MuxLab 500727 (2 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
© MuxLab Inc. -000938-A -000938-A94 SE
2321 Cohen Road, Saint-Laurent, Quebec, Canada. H4R 2N7
Tel: (514) 905-0588 Fax: (514) 905-0589
Toll Free (North America): (877) 689-5228
E-mail: URL: www.muxlab.com
info@muxlab.com
Specications
Environment
12G-SDI, 6G-SDI, 3G-SDI, HD-SDI & SD-SDI.
Devices
Camera, projectors, monitors, TV.
Transmission
Transparent to the user.
Detection
Auto Detection of the 12G/6G/3G/HD/SD-SDI Signal.
Bandwidth
11.88bps & 11.88/1.001Gbps
Data Rates
1.485, 2.97, 5.96 & 11.88 Gbps
Output Impedance
75
Signals
SDI protocol.
Supported Resolution
12G-SDI: 2160p50/59.94/60Hz (4:2:2)
6G-SDI: 2160p23.98/24/25/29.97/30Hz (4:2:2)
3G-SDI: 1080p50/59.94/60Hz (4:2:2)
HD-SDI: 1080p/23.98/24/25/29.97/30Hz
720p/50/59.94/60 Hz
1080i/50/59.94/60 Hz
SD-SDI: NTSC (59.94Hz), PAL (50Hz)
Audio
Up to 8 Audio Channels.
Ancillary Data
Supported
Input Signal
12G-SDI : SMPTE ST2082
6G-SDI : SMPTE ST2081
3G-SDI: SMPTE 424M, 425M
HD-SDI: SMPTE 292M, 296M
SD-SDI : SMPTE 259M, 344M
Connectors
One (1) BNC Female 75 Ohms, Gold Plated for input.
Four (4) BNC Female 75 Ohms, Gold Plated for outputs.
One (1) Locking Barrel Jack 2.1mm Power Connector.
Note: RG59 coaxial cables not included.
Cable Equalization
12G-SDI up to ft (230 70m)
6G-SDI up to 330ft (100m)
3G-SDI up to 594ft (180m)
Cable
RG-59 or better cable required.
Power Supply
One (1) 110-240V/5VDC power supply with interchangeable blades.
Power Consumption
3.0 Watt (Max)
Temperature
Operating: to 40°C Storage: -2 to 60°C
Humidity: Up to 90% non-condensing
Enclosure
Metal
Dimensions
3.19” x 1.61 x 0.95 (81mm x 41mm x 24mm)
Weight
0.37lbs (0.17kg)
Compliance
Regulatory: FCC, CE, RoHS Flammability: 94V0
Warranty
2 years
Order Information
5007 G-SDI 4 Splitter, 4K/60 27 12 1x
12 1XG-SDI 4 Splitter, 4K/60
500 277
Quick Installation Guide
Overview
The G-SDI 4 Splitter, 4K/60 (5007 ) allows one (1) 12G/6G/3G/HD/SD-SDI 12 1x 27
source to be distributed and amplied to up to four (4 12G/6G/3G/HD/SD-SDI )
displays The splitter supports up to 4K (3840 X 2160) video and HD audio, including .
480i (SD-SDI), 720p/1080i (HD-SDI) 1080p (3G-SDI), 4K/30 (6G-SDI) and 4K/60 ,
(12G-SDI) The device automatically detects the 12G/6G/3G/HD/SD-SDI signal and -. re
clocks and regenerates the signal at the output for extending distances between source
and displays Additionally, all connectors are on the rear panel for neater cabling. .
Applications
Applications include video production, broadcasting, outside broadcasting vehicle, SDI
camcorder, studio- -studio, post-production, live events, medical imaging display, to
mobile video.
Installation
1. 1x Identify the connectors on the G-SDI 12 4 Splitter as indicated on the
product labels above.
2. Connect the source to the 12G-SDI Input of the splitter.
3. our Connect up to f (4 display(s) to the 12G-SDI Outputs of the splitter. )
4. Connect the 5 VDC power supply to the splitter rst, and then plug the power
supply into an AC power outlet. If power is present, the power LED of the
© MuxLab Inc. 2020
splitter will be illuminated.
Note: Power ON the G-SDI 4 Splitter, 4K/60 only after all connections are 12 1x
made.
5. Power the equipment and verify the image quality.
6. The appropriate Data Rate LED will be ON to show the input signal rate speed
and that the signal is lock . ed
7. The following diagram shows the nal conguration.
Output Pairing
The outputs of this device work in pairs. Due to the high frequency and low jitter
requirement for 12G-SDI signals, to have the best performance it is strongly
recommended to use ohm terminator if a paired SDI tput port is not in use. a 75 ou
Please see the following table for the 12G-SDI output pairing:
Output Port
Pair A
Output 1 & 2
Pair B
Output 3 & 4
Troubleshooting
The following table describes some of the symptoms, probable causes and possible solutions
with respect to the installation of the G-SDI 4 Splitter, 4K/60: 12 1x
Symptom
Probable
Cause
No Image
No power
No Image
Source
No Image
Resolution
No Image
Coaxial Cable
No Image
Coaxial Cable distance
No Image
Coaxial Cable Quality
Flickering
Image
Synchronization
Choppy sound
Synchronization
If you still cannot diagnose the problem, please call MuxLab Customer Technical Support at
877-689-5228 (toll-free in North America) or (+1) 514-905-0588 (International).


Product specificaties

Merk: MuxLab
Categorie: Receiver
Model: 500727

Heb je hulp nodig?

Als je hulp nodig hebt met MuxLab 500727 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver MuxLab

MuxLab

MuxLab 500727 Handleiding

7 December 2024
MuxLab

MuxLab 500216 Handleiding

16 Januari 2024

Handleiding Receiver

Nieuwste handleidingen voor Receiver