Musway M4+ Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Musway M4+ (36 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/36
M4+
4-CHANNEL CLASS D AMPLIFIER
WITH 8-CHANNEL DSP
VERSION 1.0
V3
2
ENGLISH
TECHNICAL SPECIFICATIONS
POWER SUPPLY
Voltage: 7 - 15 VDC
Idle current: 1.2 A
Switched off: <0.1 mA
Consumption @ 13.8 VDC 2 Ω Max. Musical Power : 40 A
Remote IN: 7,5 - 15 VDC (1 mA)
Remote OUT: 7,5 - 15 VDC (200 mA)
Fuse: 40 A
AMPLIFIER STAGE
Distortion - THD (1 kHz @ 4 Ω, 90% Power): 0.05 %
Bandwidth (-3 dB, 2 V RMS, 4Ω): 15 Hz - 22 kHz
S/N ratio @ A weighted, 1 V, Max. Power: 95 dB A
Damping factor @ 1 kHz, 2 V RMS, 4 Ω: > 70
Input sensitivity: 8 V - 24 V RMS (High-level); 1.5 V - 4.5 V RMS (Low-level)
Input impedance: 13 Ω (High-level); 47 kΩ (Low-level)
LOAD IMPEDANCE (MIN):
4CH: 2 Ω
2CH - Bridge (1-2) (3-4): 4 Ω
OUTPUT POWER (RMS) @ 13.8 VDC, 1% THD:
4CH @ 4 Ω: 100 W x 4
4CH @ 2 Ω: 135 W x 4
2CH - (Bridge 1/2; 3/4) @ 4 Ω: 270 W x 2
SIGNAL OUTPUTS
RCA CH5 / CH6 / CH7 / CH8 OUT: 4 V RMS Max.
Declaration of Conformity
Audio Design GmbH hereby declares that the MUSWAY M4+V3 device complies with
Directive 2014/53/EU. The full declaration of conformity can be viewed at www.musway.de/CE
3
ENGLISH
DIGITAL SIGNAL PROCESSOR (32 bit Clock speed: 330 MHz)
Crossover: Full / Hi Pass / Lo Pass / Band Pass
Crossover type and slope: Bessel / Butterworth / Linkwitz @ 12/18/24/30/36/42/48 dB
Crossover Frequency: 1 Hz step @ 20 Hz - 20 kHz
Phase inversion: 0° / 180°
Output Equalizer: 31-Band Parametrical Equalizer: ±12 dB
Time Alignment Distance: 0 - 692 cm
Time Alignment Delay: 0 - 20 ms
Time Alignment Step: 0,08 ms; 2,8 cm
Time Alignment Fine Set: 0,02 ms; 0,7 cm
Presets (Local Stored): 6 Presets
GENERAL REQUIREMENTS
PC connections Micro USB (1.1 / 2.0 / 3.0)
Software/PC requirements: Microsoft Windows (32/64 bit):
XP, Vista, Windows 7, Windows 8, Windows 10
Graphic card min. resolution: 1024 x 768
Ambient operating temperature range: 0 - 55 °C
SIZE / WEIGHT
Size without brackets (mm): 150 x 44 x 200
Net Weight (kg): 1,6
SCOPE OF DELIVERY
1 x M4+ DSP Ampliîš¿erV3
1 x 2,5 m ISO Cable Harness with System Connector incl. 20 A Fuse
1 x 1,5 m USB Cable
1 x 6-pole Cable Adapter (INPUT CH5/6, REM IN/OUT)
4 x Mounting Bracket incl. Screws
1 x Owner’s Manual (English/German)
1 x 40 A replacement fuse
1 x 3 mm hex key


Product specificaties

Merk: Musway
Categorie: Receiver
Model: M4+

Heb je hulp nodig?

Als je hulp nodig hebt met Musway M4+ stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver Musway

Musway

Musway M12 Handleiding

15 Maart 2023
Musway

Musway D8 Handleiding

6 Februari 2023
Musway

Musway M4+ Handleiding

17 Januari 2023

Handleiding Receiver

Nieuwste handleidingen voor Receiver