Mtx Audio iWa250 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Mtx Audio iWa250 (28 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 137 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28
mtxaudio.eu facebook.com/MTXEuropetwitter.com/MTXEurope
Owner’s Manual
iWa250
Smart Wireless Airplay® DLNA® TOSLINK® 2x50W RMS Amplifier
Designed by MTX in Phoenix, AZ - USA
2 Ch. Class-D wireless smart amp.
Designed and developed by MTX in Phoenix - AZ, USA
Assembled in China
MTX - Mitek Europe
23 rue des Apennins - 75017 Paris - France
1. In the Box 2. Specifications
Left Right
hank You !
Summary
Thank you for purchasing the MTX iWa250 high-end, high-definition audio amplifier. The iWa250 is designed to deliver a
deeper dimension that brings your music to life. No other system provides the exacting measure of clarity in such a small
unit. Whether you are listening from your iPad®, iPhone®, iPod® or your computer, the iWa250 delivers outstanding sound
quality. Congratulations for making a smart choice and enjoy the ultimate audio experience with MTX.
1. In the Box
2. Specifications
3. Connections
4. LED status
5. Remote control keys
6. Installation
7. How to connect the iWa250 to your
Wi-fi network (iOs macOS)
8. How to choose a streaming device with iOs
9. How to choose a streaming device with macOS
10. How to connect the iWa250 to your
Wi-fi network (Android®/Windows®)
11. “Wi-fi Direct Mode : the iWa250 can create its
own Wi-fi network
12. How to use Spotify Connect
13. Automatic Networked Standby and OFF
14. Safety Informations
15. About Apple® & Airplay®
16. RF Parameters
17. Recycling
18. Support / Help / Question ?
19. Stay Tuned
1x iWa250 amp with its built in
universal power supply
2x Wi-fi antennas
1x Power cable (Europlug)
1x IR (Infrared) receiver
1x Remote control
1x This owner’s manual
• Output Power :
- 2x50W RMS @4Ω 0,1% THD+N
- 2x25W RMS @8Ω 0,1% THD+N
• Compatible load : 4Ω to 8Ω
• Inputs : - Airplay®/DLNA® - Aux (RCA) - TOSLINK® (JIS F05)
• Infrared remote control
• Power supply : 100V~120V - 220V~240V, 50~60Hz
• Dimensions : 3.15“x 8“x 3.15“ (8x20x8cm)
Weight : 1900g (Amp only)
Top
3. Connections
1. Power OFF :
Push once to switch the unit OFF -> Both LEDs will
switch off. Note that this key doesn’t switch on the
amp. You have to push an input to switch the unit on.
Push for 5 seconds to reset the amp -> The iWa250
will switch off with factory settings applied.
2. Airplay®/DLNA®/Wi-fi input :
• Push once to switch on the iWa250 on Airplay®/
DLNA® input -> The right LED will switch on in green.
Push for 10 seconds, the iWa250 will switch off the
Wi-fi. If you push the Airplay®/DLNA® key for another
10 seconds, the iWa250 will switch on the Wi-fi again.
3. AUX (Auxiliary) input :
Push once to switch on the iWa250 and use the AUX
input -> The right LED will switch on in red.
4. TOSLINK® input : Push once to switch on
the iWa250 and use the optical TOSLINK® input
-> The right LED will switch on in blue.
5. Volume UP : Use to raise the volume level.
6. Volume Down : Use to reduce the volume level.
7. Skip backward : Push once to go back one track
(Only with Airplay® and Spotify®).
8. Skip forward : Push
once to go to the next track
(Only with Airplay® and
Spotify®).
9. Play/Pause : Push once
to play or pause the track
(Only with Airplay® and
Spotify)
10. Wi-fi settings :
Push once to start the
pairing process and put
the iWa250 in the network
-> The left LED will
flash pink during the
process. When the
amp will be connected
to your netwotk, the left
LED will turn to blue. See section 7 (iOs macOS) or 10
(Android® Windows®).
Push for 5 seconds to turn the unit into “Wi-fi
Direct mode (The unit creates its own network)
-> The left LED will turn to red. See section 11.
11. Bass level down : use to reduce the bass level.
12. Bass level up : use to raise the bass level.
1. Power supply connector - use the provided power
cord and connect it to a 110V or 220V wall plug. You don’t
need to change any setting, the power supply is universal.
2. RCA Input - These RCA inputs are used with your
external music source. MTX recommends only high
quality RCA cables to decrease the possibility of radiated
noise entering the system.
3. TOSLINinput - this optical input is designed to be
connected with any optical audio divice. For example,
you can use it with your TV, your DVD/CD/BR player or any
streaming device.
4. Infrared receiver connector - Connect the provided IR
sensor. Note that without IR sensor, the remote control will
not be functional. It also requires that the IR receiver and IR
remote control are in sight.
5&6. Speakers connectors - Connect or speakers
here. Ensure correct polarity, positive-to-positive (+/+)
and negative-to-negative (-/-). Reversing the polarity
strongly degrades the bass level and sound quality.
7&8. Wi-fi antenna connectors - Connect the provided
antennas. Note that the Airplay®/DLNA® input will not
work properly without the antennas.
9. Wi-fi status LED (Left) :
• Blue : connected to a Wi-fi network (Regular status).
• Flashing Blue : Searching for a Wi-fi network.
• Flashing Pink : in pairing process to join the Wi-fi network.
See section 7 (iOs macOS) or 10 (Android® Windows®)
• Red : “Wi-fi Direct“ mode, the unit creates its own Wi-fi network
called “MTX iWa250 network”. See section 11.
10. Input LED (Right) :
• Green : Airplay®/DLNA®/Wi-fi input.
• Red : Aux input (RCA).
• Blue : Optical TOSLINK® input.
3. Connections
5. Remote control keys
4. LED Colours Status


Product specificaties

Merk: Mtx Audio
Categorie: Niet gecategoriseerd
Model: iWa250

Heb je hulp nodig?

Als je hulp nodig hebt met Mtx Audio iWa250 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Mtx Audio

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd