Mtx Audio iWa225 Handleiding

Mtx Audio Niet gecategoriseerd iWa225

Lees hieronder de 📖 handleiding in het Nederlandse voor Mtx Audio iWa225 (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

Owner’s manual

iWa225

Smart in-wall Bluetooth® 2x25W ampliﬁer

mtxaudio.eu facebook.com/MTXEuropetwitter.com/MTXEurope

In the Box

Speciﬁcations

Connections

Thank You !

Thank you for purchasing the MTX iWa225 high-end, high-deﬁnition audio ampliﬁer. The iWa225 is designed to deliver a deeper dimension

that brings your music to life. No other system provides the exacting measure of clarity in such a small unit. Whether you are listening from

your iPad, iPhone, iPod or computer, the iWa225 delivers outstanding sound quality. Congratulations for making a smart choice and enjoy

the ultimate audio experience with MTX.

1. RCA Inputs - These RCA inputs are used with your external

music source. MTX recommends only high quality RCA cables to

decrease the possibility of radiated noise entering the system.

2. Bluetooth antenna connector - Connect the provided an-

tenna. Note the BT input will not work properly without the

antenna. It also requires that the IR receiver and IR remote

control are in sight.

3. IR (Infra red receiver connector - Connect the provided IR

sensor. Note that without IR sensor, the remote control will not

be functional.

4. Speakers connectors - Connect your 4Ω or 8Ω speakers to it.

Be carefull with the polarities. Reverse polarity strongly de-

grades the level of serious and sound quality.

5. Power supply connector - use the provided power cord

and connect it to a 110V or 220V wall plug. You don’t need to

change any setting.

1x iWa225 amp with its built in power supply

1x Bluetooth antenna

1x Power cable

1x IR (Infra red) receiver

1x Remote control

1x This owner’s manual

• Power : 2x25W RMS @4Ω 0,1%THD+N or 2x13W RMS @8Ω 0,1%THD+N

• Compatible load : 4Ω to 8Ω

• Inputs : Bluetooth and Aux (RCA)

• Remote : IR receiver with 100cm cable

• Power supply : 100~120V - 200~240V, 50 - 60Hz

• Dimensions : 8x20x8cm

• Weight : 920g (amp only)

Remote control keys

Quick start

Bluetooth paring

Recycling

How to Stay Tuned :

Do not trash this product. You must deliver it to the applicable collection point for recycling. The iWa225 is made of highly recyclable com-

ponents and materials.

1. Power OFF : use to switch oﬀ the unit. Note that it doesn’t switch on the unit…

2. Aux input : push once to switch on the iWa225 and use the AUX input.

->The right red LED will switch on

3. Bluetooth input : Push once to switch on the iWa225 and to use the BT input.

->The left blue LED will switch on

4. Volume UP : use it to raise the volume level

5. Skip backward : push once to go back in track (only available in BT)

6. Skip forward : push once to go next (only available in BT)

7. Volume Down : use it to reduce the volume level

8. Play/Pause : push once to play or pause the track(only available in BT mode)

9. BT paring : Push once to pair a new device to with your iWa225.

Push once to release the BT connexion.

1. Screw the antenna

2. Connect the speakers. It is important to respect the speaker polarities to get a good sound and a good bass response. Note that the

minimum speaker load is 4Ω

3. Connect the RCA inputs if available

4. Connect the IR sensor and make it visible for the IR remote control

5. Connect the power cable to a wall socket. Your iWa225 is ready

6. On the remote control, remove the battery protection to activate it

7. Press the Aux input or the BT input on the remote control. The amp is on.

8. If you use the Aux input, adjust the volume level.

9. If you use the Bluetooth input, go to the next paragraph.

1. First connexion : push the Bluetooth key (n°3) on the remote control. The unit is switching on and the blue LED is now on.

2. Push once on the “BT paring/release” key (n°9) on the remote control. The blue LED is now ﬂashing blue. The unit is ready to pair.

3. On your BT device (Cell phone, iPad, computer…), go to the BT preferences and tap on “MTX iWa225” to pair the devices together.

4. When it is done, go to your music app and play a track.

Note 1 : After 1 minute without BT signal, the unit will switch to Aux automatically if it detects signal on Aux.

Note 2 : You have to be in BT input to release BT.

Note 3 : You can always release the MTX iWa225 and make it available for an other BT device by simply pushing the “BT paring” (n°9) key

on the remote control. You don’t need to disconnect the devices, just push once “BT paring” (n°9).

https://www.facebook.com/MTXEurope

https://twitter.com/MTXEurope

http://www.mtxaudio.eu

Product specificaties

Merk:	Mtx Audio
Categorie:	Niet gecategoriseerd
Model:	iWa225

Heb je hulp nodig?

Als je hulp nodig hebt met Mtx Audio iWa225 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Mtx Audio

Mtx Audio TRP8 Handleiding

8 Juli 2023

Mtx Audio iWa250 Handleiding

22 Juni 2023

Mtx Audio Terminator TNA251 Handleiding

20 Juni 2023

Mtx Audio RTP8x2 Handleiding

20 Juni 2023

Mtx Audio RTP8x3 Handleiding

19 Juni 2023

Mtx Audio MUDBTRC Handleiding

16 Juni 2023

Mtx Audio RTP12 Handleiding

16 Juni 2023

Mtx Audio iWs65 Handleiding

13 Juni 2023

Mtx Audio X3-17-DK Handleiding

12 Juni 2023

Mtx Audio AWBTSW Handleiding

12 Juni 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Panasonic NB-W250 Handleiding

25 November 2024

Alpine CHM-S611 Handleiding

25 November 2024

AOpen DE3650-C Handleiding

25 November 2024

Lazer Urbanize MIPS Handleiding

25 November 2024

Symmons Dia 353GB-24 Handleiding

25 November 2024

SoundTube IPD-RS62-EZ Handleiding

25 November 2024

Moen Camerist 4905 Handleiding

25 November 2024

Lazer Cameleon DLX Handleiding

25 November 2024

DMT DLD-85 Handleiding

25 November 2024

AOpen AM1120T Handleiding

25 November 2024