Motorola PIP1610 Handleiding

Motorola Babyfoon PIP1610

Lees hieronder de 📖 handleiding in het Nederlandse voor Motorola PIP1610 (52 pagina's) in de categorie Babyfoon. Deze handleiding was nuttig voor 64 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/52

Models:

PIP1610 HD CONNECT

PIP1610-2 HD CONNECT

PIP1610-3 HD CONNECT

PIP1610-4 HD CONNECT

Quick start guide / Schnellstartanleitung / Guide de démarrage rapide

/ Snelstartgids / Guía de inicio rápido / Guida rapida / Guia de início

rápido / Skrócona instrukcja obsługi / Rychlý návod / Stručná príručka /

Snabbstartsguide / Hurtigstart-guide

1. At a glance

Baby (camera) unit

Parent unit

1. Screen display

2. Dual sound level indications

(front and top view)

3. Power button

Press and hold to turn on or o. Press

to turn the screen on or o.

4. Menu button

Press to open the menu.

5. OK / Zoom button

Press to conﬁrm a selection/zoom in

or out.

6. Navigation button

Pan or tilt the camera to dierent

directions/adjust menu settings/

press left or right to select the

parent unit's volume level.

7. Volume / Back button

8. Talk back button

Press and hold to talk to the baby.

9. Antenna

10. Speaker

1. Camera

2. Desk stand

3. Speaker

4. Antenna

5. Power jack

6. Power / Linking LED indicator

Lights up in blue when the parent unit is

powered on and linked to the baby (camera)

unit.

7. Pair button

Press and hold to pair with the parent unit.

2. Connect and charge

Baby (camera) unit

1. Plug the DC plug of the power adapter into

the power socket on the rear of the baby

(camera) unit and plug the other end of the

AC adapter into the wall socket.

2. The baby unit turns on and the power

indicator lights up in blue and blinks in red

after 30 seconds if the parent unit has not

been powered up.

WARNING

Strangulation Hazard. Children have STRANGLED in cords. Keep this cord out of the

reach of children (more than 1 meter or 3 feet away). Do not remove the tags from

the AC Adapters. Only use the AC Adapters provided.

Parent unit

A rechargeable battery is already pre-installed inside the parent unit. When fully

charged, you can move the parent unit without losing the link and picture from the

baby (camera) unit. When charging the battery for the ﬁrst time, charge for at least

16 hours continuously.

1. Plug the DC plug of the power adapter into

the power socket on the side of the parent

unit and plug the other end of the AC adapter

into the wall socket.

2. Switch on the AC power.

3. Press and hold the power button on the top of

the parent unit to turn it on.

4. When the parent unit is fully charged, will

appear steadily on the screen display.

Note

Use only the supplied power adapter (DC5V / 1500 mA).

Pair the baby (camera) unit to the parent unit

We have paired the baby unit to the parent unit in the pack. In case you want to pair

an extra camera, press and hold on the rear of the baby (camera) unit until the

voice prompt is heard. 'Ready for pairing'

3. Wall mount the baby (camera) unit

1. Mark the positions of 2 screw holes on the wall. Drill a screw hole at each marking.

2. Install the supplied wall anchors into 2 screw holes on the wall.

3. Insert the supplied wall mounting screws into the wall anchors.

4. Remove the desk stand by loosening the screw on the underside of the desk

stand.

5. Fix and fasten this screw on the baby (camera) unit and the wall mount bracket.

6. Hang the wall mount bracket on the wall mounting screws on the wall.

Press and hold

Product specificaties

Merk:	Motorola
Categorie:	Babyfoon
Model:	PIP1610
Kleur van het product:	Wit
Gewicht verpakking:	4210 g
Breedte verpakking:	225.8 mm
Diepte verpakking:	343.9 mm
Hoogte verpakking:	229.8 mm
Gebruikershandleiding:	Ja
LED-indicatoren:	Ja
Beeldschermdiagonaal:	5 "
Resolutie:	1920 x 1080 Pixels
Snelstartgids:	Ja
Ingebouwde luidsprekers:	Ja
Interface:	Wi-Fi
Ingebouwde microfoon:	Ja
Soort apparaat:	Camera
Maximumbereik:	300 m
Zender breedte:	120.1 mm
Zender diepte:	95.7 mm
Zender hoogte:	132.3 mm
Receiver gewicht:	280 g
Transmitter gewicht:	240 g
Receiver breedte:	95.5 mm
Diepte van de receiver:	170.6 mm
Receiver hoogte:	56.3 mm
Smartphone-ondersteuning:	Ja