Monacor ELIP-2000BX Handleiding

Monacor Bewakingscamera ELIP-2000BX

Lees hieronder de 📖 handleiding in het Nederlandse voor Monacor ELIP-2000BX (14 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/14

Quick Start Guide

Note:

This manual may contain some incorrect places, even though it was published with our carefully proofreading.

The news updates will be added to the next release without notice. Your valuable advice is really appreciated.

V 4.0

ELIP-2000BX ELIP-2036BF ELIP-2036DF

ELIP-2037PIR ELIP-2550BVM ELIP-2812BV

ELIP-2812BWDR ELIP-2812DV ELIP-2812DVM

Note:

PoE Switch

9 Port Fast Ethern et Swit ch With 8 Po rt PoE

Power Adapter

POE Ethernet Switch

RJ-45

HD IP Camera (PoE)

To PoE Switch LAN port

DC 12V

HD IP Camera

(without PoE)

HD IP Camera

(without PoE)

To Switch or Router LAN port

To router LAN port

Router

HDMI or VGA output

RJ-45 To router LAN port

To router LAN port

PoE NVR

To NVR PoE port

1. The camera should be connected to an OPTIONAL 12 volt power supply if you do not use PoE (Power

over Ethernet).

2. A Windows computer is more convenient to setup and troubleshooting.

Figure 1: Working With POE Switch

Figure 2: Working With POE NVR

Modifying the

Connecting the camera to system

Modifying the camera’s IP address

Note ou can also ﬁnd out the LAN conﬁguration via Windows GUI：Y

Now you can get all the

local network information.

IPv4 Address: 192.168.1.?

Subnet Mask: 255.255.255.0

Default gateway: 192.168.1.1

DNS Servers: 192.168.1.1

Default: IP address: 192.168.0.123 , Username: admin, Password: 123456

( We strongly recommend modifying the default password for your security).

Each IP camera has the same default IP address after leaving the factory. In order to

guarantee network connectivity and access the live video, it is essential to change the

camera’s IP address to unique via computer before using. To quickly configure the IP

camera, download the device search tool from the Internet: www.monacor.com ->

Support -> Downloads.

Before modifying the IP address you’d better conﬁrm the IP network planning and avoid

IP address conﬂict.

Steps on Local Area Windows 10 PC : Search Windows -> cmd -> ipconﬁg /all

Modifying the

Product specificaties

Merk:	Monacor
Categorie:	Bewakingscamera
Model:	ELIP-2000BX
Kleur van het product:	Black, Stainless steel, White
Gewicht:	640 g
Breedte:	76 mm
Diepte:	143 mm
Hoogte:	56 mm
Soort:	IP-beveiligingscamera
Bluetooth:	Nee
Maximale capaciteit van de geheugenkaart:	64 GB
Vormfactor:	Doos
Ondersteuning voor plaatsing:	Binnen & buiten
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Ja
Montagewijze:	Plafond/muur
Maximum resolutie:	1920 x 1080 Pixels
Totaal aantal megapixels:	2 MP
Videocompressieformaten:	H.264, H.265
Type stroombron:	DC, PoE
Stroomuitvoer (volt):	12
Stroomuitvoer (ampère):	0.15 A
Minimale belichting:	0.01 Lux
Aantal cameras:	1
Geïntegreerde geheugenkaartlezer:	Ja
Compatibele geheugenkaarten:	MicroSD (TransFlash)
Ingebouwde HDD:	Nee
Nachtvisie:	Ja
Video bewegings-detectie:	Ja
Audiosysteem:	2-weg
Aantal Ethernet LAN (RJ-45)-poorten:	1
Omvang optische sensor:	1/2.7 "
Type beeldsensor:	CMOS
Ondersteunde netwerkprotocollen:	RTSP, DHCP, NTP, DST, FTP, SMTP
Ethernet interface type:	Fast Ethernet
Dag/nacht modus:	Ja
Controle camerapanning:	Nee
Kantelfunctie camera:	Nee
BNC output ports:	1
Aantal sensoren:	1
Achtergrondverlichting compensatie:	Ja
Alarm ingang/uitgang:	Ja
Wifi:	Nee
Bedrijfstemperatuur (T-T):	-10 - 50 °C
Privézone maskeren:	Ja
Digital Wide Dynamic Range (DWDR):	Ja