MINI0806 DASH CAMERA Handleiding

MINI0806 Autocamera DASH CAMERA

Lees hieronder de 📖 handleiding in het Nederlandse voor MINI0806 DASH CAMERA (20 pagina's) in de categorie Autocamera. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
User's Guide For
MINI0806 DASH CAMERA
Please read this manual carefully before using.
This manual should be kept for future reference.
WARNING: The dash camera should be set up before driving.
Concentration should always be maintained on the task of driving, let the
dash camera record accidents caused by others not by youself.
– Do not expose the dash camera to dusty, dirty or sandy conditions, if these
gets into the camera or on the lens it can damage the components.
– Do not expose the dash camera to high temperatures.
The normal operating temperature of the dash camera is 0 C to 40 C (32F to
104F
High temperatures can shorten the life span of electronic device, and
extremely high temperature will shorten the battery and/or degrade the
plastic components. Note extreme temperatures can be achieved in parked
cars in direct sunlight.
Expose the dash camera to strong sunlight when using Motion Detection
mode may cause the dash camera to malfunction or become damaged as
the temperature can be too high in your car in summer.
– Do not expose the dash camera to a cold environment.
Extremely low temperatures can also damage the electronic components; if
there is water moisture in cold environment, freezing water can cause
damage, as can thawing.
– Do not try to dismantle or open the casing. Doing so may result in electrical
shock and will most likely result in damaging the dash camera.
– Do not mistreat the dash camera, dropping, sudden impact, and vibration
can cause damage.
– Do not clean the dash camera with chemicals, cleaning solution or a high
concentration detergent. Only a slightly damp cloth should be used.
Please download the latest firmware from:
www.mini0806.com
to upgrade the camera for improved stability and extra functions.
Extract the FIRMWARE.BIN file to the root folder of your microSD card; insert
the card into your mini0806 camera and power on. The camera will auto
examine the FIRMWARE.BIN file and popup a confirmation dialogue, press the
UP or DOWN button to choose YES and press OK to upgrade.
The camera will shut down automatically after upgrading is completed.
Enjoy.
PRECAUTIONS
UPGRADING
1
2
3
4
5
6
7
8
9
10
11
24
25
26
mini0806 camera
camera mounting bracket
(GPS logger inside)
27
1 - mount
2 - top cooling holes
3 - speaker holes
4 - CPL mounting bar
5 - lens
6 - front cooling holes
7 - bottom cooling holes
8 - side cooling holes
9 - power indicator
10 - recording indicator
11 - GPS/MIC indicator
APPEARANCE
12
13
14
17
18
19
15
16
20
21
22
23
12 - sticker
13 - HDMI output
14 - card B slot
15 - TFT screen
16 - mounting contacts
17 - UP button
18 - OK button
19 - DOWN button
20 - MIC holes
21 - microUSB port
22 - card A slot
23 - POWER button
24 - mount
25 - microUSB port
26 - VHB pad
27 - mounting contacts
APPEARANCE
OPERATION
Read this chapter to know how to operate the camera.
TURN ON /OFF YOUR CAMERA
You may turn on the camera by pressing the power button.
You may turn off the camera by holding the power button for 2 seconds.
The camera is also pre-congured to auto turn on and start recording once
it receives power, e.g. when the car engine is started.
The camera is also pre-congured to auto stop recording and turn off once
it loses power, e.g. when the car engine is stopped.
The camera is also pre-congured to auto turn off if it is in standby for a
long time without any button pressed.
The camera is also pre-congured to auto stop recording and turn off when
the internal battery runs out if there is no external power supply.
STORAGE CARD PREPARATION
The camera supports dual microSD cards, both 128GB MAX. It is
recommended to use Class 6 or Class 10 high speed microSD card to avoid
storage problems.
The videos can be stored in card A or card B depending on the setting.
Insert a microSD card in the card slot, the camera will auto start recording if
the power is on.
RECORDING A VIDEO
When the camera is standby, press the OK button to start video recording.
When the camera is recording, press the OK button to stop and enter
standby.
The camera is also pre-congured to auto start recording once it receives
power, i.e. when the car engine is started.
The camera is also pre-congured to auto stop recording and turn off once
it looses power, i.e. when the car engine is stopped.
TAKING A PHOTO
When the camera is in standby or recording, hold the OK button for 2
seconds to take a photo.
PLAYBACK ON CAMERA
When the camera is in standby, hold the DOWN button to enter playback on
the camera.
When the camera is in playback, hold the DOWN button to standby.
When the camera is in playback, press UP and DOWN buttons to highlight
the video or photo you want to review, then press OK to view.
When the camera is in playback, press UP and DOWN buttons to highlight
the video or photo you want to edit, then hold UP button to active the sub-
menu: Delete file, Protect file, Auto play, Copy to another card, Switch card.
Press UP and Down buttons to choose and then OK button to perform the
action.
The 0806 camera is pre-congured to provide you with a simple plug and play
experience - the default settings are the most popular options.
Please read this chapter to help you to customize the camera setting, when
you require a slightly different experience.
The default setting are listed in BOLD.
SETTING
VIDEO RESOLUTION
Here you can choose the video resolution you want to use; higher resolution
videos will take more storage space.
options: 2560x1080 30fps 21:9 (cinema mode)
2304x1296 30fps 16:9
1920x1080 45fps 16:9
1920x1080 30fps 16:9
HDR 1920x1080 30fps 16:9
1280x720 60fps 16:9
1280x720 30fps 16:9
VIDEO QUALITY
Here you can adjust the video quality; the quality will affect video grain,
sharpness, contrast and so on. Better quality videos will result in higher bit
rate and take more storage space.
options: Super Fine
Fine
Normal
PHOTO RESOLUTION
Here you can choose the photo resolution you want to use; higher resolution
photos will take more storage space.
options: 4M (2688x1512 16:9)
9M (4000x2250 16:9)
13M (4800x2700 16:9)
PHOTO QUALITY
Here you can adjust the photo quality; the quality will affect photo grain,
sharpness, contrast and so on. Better quality photos will take more storage
space.
options: Super Fine
Fine
Normal
AUTO EXPOSURE METERING
Here you can set the measuring area for Auto Exposure; this setting will affect
the video brightness and quality. CENTER is recommended if there is no
special requirement.
options: CENTER
AVERAGE
SPOT
SETTING
FLICKER
Here you can set the sensor flicker frequency to fit your AC power frequency
and reduce the effect of flickering lamps. Please leave it AUTO if you dont
know which frequency is in use in your country.
options: AUTO
60HZ
50HZ
WHITE BALANCE
Here you can set the image white balance mode to improve colour balance in
videos/images in different weather and lighting conditions. Auto is recommend
to fit most conditions.
options: AUTO
SUNNY
CLOUDY
TUNGSTEN
FLUORESCENT
EXPOSURE COMPENSATION
Here you can manually adjust the Exposure Values to improve the image
brightness.
options: -2.0
-1.7
-1.3
-1.0
-0.7
-0.3
0
+0.3
+0.7
+1.0
+1.3
+1.7
+2.0
ROTATE IMAGE 180°
When you want to mount the camera up-side-down, the setting will rotate the
recorded image 180° so that appears the correct way up on your TV/computer.
The button functions will be changed at the same time so that the UP button is
still at the top when the camera is rotated.
options: OFF
ON
LOOP RECORDING
The 0806 camera supports automatic loop recording when the card is full.
Here you can set the segment length according your requirement. If you need
a continuous video without any segmentation, please set it to OFF but be
SETTING
LANGUAGE
Here you can set the language you prefer.
options: ENGLISH
РУССКИЙ
DRIVER NUMBER
Here you can dene the driver number or your customized information to
stamp on the video (9 characters or numbers).
000000000
DATE STAMPING
Here you can dene the date stamping format on video.
options: OFF
YYMMDD
MMDDYY
DDMMYY
TIME STAMPING
Here you can dene the time stamping format on video.
options: OFF
12 HOURS
24 HOURS
DATE AND TIME
Here you can set the system date and time manually. The date/time
information will be automatically updated if GPS satellites are connected.
00 2014 / 11 / 11 12:12
time zone da t e t ime
The time zone, corrected for daylight saving time, will need to be set before the
GPS signal can correctly update the time.
SPEED STAMPING
The 0806 camera can record your driving speed and stamp the speed data on
video. Here you can dene the speed data display method
options: OFF
KM/H
MPH
DRIVER NUMBER STAMPING
The 0806 camera can stamp your driver number or your customized
information on video. Please dene the driver number in next title. Here is the
switch.
options: OFF
ON
options: OFF
LOG ONLY
ON
SPECIFICATION
mini0806 camera box content
dash camera unit
GPS logging mounting bracket
2° and 4° angle mounting wedge
wedge mounting screws M1.4*5mm
power lead for cigar lighter socket
USB Cable
VHB sticker pads
lens cleaner
manual
optional: 24mm CPL filter, no GPS mounting bracket, Parking Guard
mounting bracket and power lead, hardwire kit, external GPS antenna,
HDMI cable, AV-out cable, microSD-USB card reader, microSD-SD
adapter, microSD-WiFiSD adapter, microSD-microUSB OTG card reader,
microSD card(s)
mini0806 camera specication
4MP CMOS image sensor
135 degree angle view field, F2.0 aperture
1.5inch TFT LCD screen
cinema mode recording 2560*1080px 21:9 30fps
super HD recording 2304*1296px 16:9 30fps
full HD recording 1920*1080px 16:9 45fps
HD recording 1280*720px 16:9 60fps
H.264 coding MOV file recording
supports dual microSD card 128GB*2
supports High Dynamic Range boost
supports GPS route logging
supports G-sensor file protection and SOS manual file protection
supports parking guard (with Parking Guard mounting bracket)
supports movement detection
supports Lane Departure Warning System
supports Forward Collision Warning System
supports up-side-down mounting
supports HDMI output to TV and optional AV-out
supports Circular Polarizing Filters
supports 160degree rotating and 6 degree offset
built in 3.7V 200mAh Li-Polymer Battery
PC System Requirements
Windows XP or later operating system, MAC 10.1
Intel Pentium 4 2.8GHz CPU or above (recommended 3GHz)
at least 2GB RAM or above (recommended 4GB)
internet connection (for GPS log playback)


Product specificaties

Merk: MINI0806
Categorie: Autocamera
Model: DASH CAMERA

Heb je hulp nodig?

Als je hulp nodig hebt met MINI0806 DASH CAMERA stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Autocamera MINI0806

Handleiding Autocamera

Nieuwste handleidingen voor Autocamera