Milwaukee 2206-20 Handleiding

Milwaukee Multimeter 2206-20

Lees hieronder de 📖 handleiding in het Nederlandse voor Milwaukee 2206-20 (20 pagina's) in de categorie Multimeter. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/20

Cat. No. / No de cat.

2205-20, 2206-20

FORK METERS

ESTEUR ÉLECTRIQUE À MÂCHOIRES OUVERTES

COMPROBADORES DE CORRIENTE TIPO HORQUILLA

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

IMPORTANT

SAFETY

INSTRUCTIONS

WARNING

READ ALL SAFETY WARNINGS

AND INSTRUCTIONS

Failure to follow the warnings and instructions

may result in electric shock, re and/or serious

injury, as well as instrument damage and/or dam-

age to the equipment being tested. Save these

instructions - This operator’s manual contains

important safety and operating instructions for

the MILWAUKEE Fork Meters. Before using, read

this operator’s manual and all labels on the Fork

Meters.

DANGER

Never make measurement on a

circuit in which volatage over

AC1000C exists. Use only leads rated 1000V or

better.

Do not attempt to make measurement in the pres-

ence of ammable gases. Otherwise, the use of

the instrument may cause sparking, which can

lead to an explosion.

Never attempt to use the instrument if its surface

or your hand is wet.

Do not exceed the maximum allowable input of

any measuring range.

Only test on unenergized circuits unless abso-

lutely necessary.

Check tool functionality on a known circuit rst.

Never assume tool is working. Assume circuits

are live until they can be proven de-energized.

Do not ground yourself while measuring. Avoid

body contact with earthed or grounded surfaces

such as pipes, radiators, ranges and refrigera-

tors.

Never open the Battery cover during a measure-

ment.

This instrument is to be used only in its intended

applications or conditions. Otherwise, the instru-

ment's safety functions may not work, resulting in

serious personal injury and instrument damage.

To reduce the risk of injury from shock and arc

blasts, always wear personal protective equip-

ment where live conductors are exposed.

WARNING

Never attempt to make measure-

ment if any abnormal conditions,

such as broken case and exposed metal parts

are found on the instrument.

Do not rotate the Rotary Dial while the test leads

are being connected.

Verify proper operation on a known source before

use or taking action as a result of the indication

of the instrument.

Do not install substitute parts or make any modi-

cation to the instrument. For repair or re-cali-

bration, return the tool to a factory Service/Sales

Support Branch or authorized service station.

Do not try to replace the batteries if the surface

of the instrument is wet.

Disconnect all the cords and cables from the

object under test and power o󰀨 the instrument

before opening the Battery Cover for Battery

replacement.

This tool is designed to be powered by 2-AA

batteries properly inserted into the MILWAUKEE

Fork Meters. Do not attempt to use with any other

voltage or power supply.

Install battery according to polarity (+ and –)

diagrams.

Do not leave batteries within the reach of children.

Do not mix new and used batteries. Do not mix

brands (or types within brands) of batteries.

Properly dispose of used batteries.

Do not incinerate or dismantle batteries.

Under abusive conditions, liquid may be ejected

from the battery, avoid contact. If contact ac-

cidentally occurs, flush with water. If liquid

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irrita-

tion or burns.

CAUTION

Set the Dial to an appropriate posi-

tion before starting measurement.

Firmly insert the test leads.

Disconnect the test leads from the instrument for

current measurement.

Do not expose the instrument to the direct sun,

high temperature and humidity or dewfall.

Altitude 2000m or less. Appropriate operating

temperature is within -10ºC and 50ºC.

Keep away from excess dust and water.

Be sure to power o󰀨 the instrument after use.

When the instrument will not be in use for a

long period, place it in storage after removing

the batteries.

Use a cloth dipped in water or neutral detergent

for cleaning the instrument. Do not use abrasives

or solvents.

SYMBOLOGY

Read Operator’s Manual

Double insulation

Risk of electric shock

Indicates that this instrument can clamp

on bare conductors when measuring a

voltage corresponding to the applicable

measurement category, which is marked

next to this symbol.

Earth

Danger, Warning, or Caution - Consult

the operator's manual for additional

safety information.

Battery compartment

European Conformity Mark

C US

UL Listing for Canada and U.S.

Cat III

Cat IV

Classication of transient overvoltages,

based on nominal line voltage to earth.

Do not dispose of this product as

unsorted municipal waste.

SPECIFICATIONS

Cat. No. 2205-20, 2206-20 ......................................

Accuracy is specied for 1 year after calibration, at

operating temperatures of 18°C to 28°C (64°F to

82°F), with relative humidity at 0 % to 85 %.

Maximum voltage between any

terminal and earth ground ........................ 1000 V

Jaw Opening ........................ approx. 5/8" (16 mm)

(maximum conductor size)

Temperature

Operating ........... -10°C to 50°C (14°F to 122°F)

Storage ............. -40°C to 60°C (-40°F to 140°F)

Temperature Coe󰀩cient................................0.1 x

(specied accuracy)/°C

(<18°C or >28°C)

Operating Altitude ............................2,000 meters

IP Rating ......................................................... IP54

(International Dust and Water Protection)

Drop Test ................................................... 1 Meter

Battery ......................... 2 AA, NEDA 15 A,IEC LR6

Battery Life ..............Approx. 26 Hours all lights on

Safety Compliances ......EN61010-1, UL 61010-1,

EN61010-031 (Probes),

IEC 61010-2-32 (Clamp Assemblies),

IEC/EN 61010-1 2nd Edition for measurement

Category IV 600V, Category III 1000V,

Pollution Degree 2, EMC EN61326-1

Certications........................................ cULus, CE

FUNCTIONAL DESCRIPTION

1. Light On/O󰀨 button

2. Hold button

3. Jaws

4. Light

5. NCV indicator

6. Dial

7. Display

8. Terminal inputs

Cat. No.

2206-20

Lo-

Cat. No.

2205-20

Dial Position Range Resolution Accuracy

Voltage AC/DC 400V

1000V 0.1V/1V : ±(1.5% + 5 dgt) 45-500 Hz

: ±(1.0% + 2 dgt)

Current AC 200A 0.1A ±(3.0% + 3 dgt) 45-60 Hz

Resistance

Continuity

400.0Ω

4.000kΩ

40.00kΩ

400.0kΩ

4.000MΩ

40.00MΩ

0.1Ω

0.001kΩ

0.01kΩ

0.1kΩ

0.001MΩ

0.01MΩ

±(1.0% + 5 dgt)

±(1.0% + 2 dgt)

±(2.0% + 5 dgt)

Capacitance (2206-20) 1000μF 1μF ±(1.9% + 2 dgt)

100.0μF 0.1μF

Current DC (2206-20) 400.0μA

1000μA 0.1μA ±(1.0% + 2 dgt)

Temperature C° / F°

(2206-20)

-40ºC ~ 400ºC

-40ºF ~ 752ºF

0.1°C

0.2°F

°C:±(1% + 2°C)

ºF:±(1% + 3 ºF)

Lo-Z Low Input Impedance

(2205-20)

400.0V

1000V 0.1V/1V ±(2.0% + 3 dgt) AC:45~500Hz

FUNCTIONS

Product specificaties

Merk:	Milwaukee
Categorie:	Multimeter
Model:	2206-20
Kleur van het product:	Black, Red
Gebruikershandleiding:	Ja
Stroombron:	Batterij/Accu
Beeldscherm:	LCD
Ondersteuning voor plaatsing:	Draagbare multimeter
Type product:	Digitale multimeter
Type batterij:	AA
Synchronisatie ingangsimpedantie:	40 Ohm