Mikrotik PL7510Gi Handleiding

Mikrotik Powerline adapter PL7510Gi

Lees hieronder de 📖 handleiding in het Nederlandse voor Mikrotik PL7510Gi (5 pagina's) in de categorie Powerline adapter. Deze handleiding was nuttig voor 61 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/5

PWR-LINE PRO

The PWR-LINE PRO allow Ethernet-like connectivity between supported devices over regular electrical power

lines. When plugged into the same electrical circuit, the device will establish Ethernet connectivity by using the

HomePlug AV 2 standard. PWR-LINE PRO does not require any system software or configuration, it's ready to use.

Connecting

Plug one PWR-LINE PRO device into a power socket.

Connect to one of the LAN ports of your MikroTik router to the PWR-LINE PRO Ethernet port.

Plug another PWR-LINE PRO unit (or any other compatible device) somewhere in the same electrical

circuit.

Use the sync button to connect the devices and your local network will automatically be extended. Please

see section on how to pair additional PWR-LINE PRO devices.PWR connection button (sync)

PWR-LINE PRO supports PoE out from Ethernet port to power another Mikrotik device, this can be

activated with a switch, please see section.LED lights and PoE switch

Mounting

PWR-LINE PRO can be mounted on the wall using four provided screws:

1. To access mounting points, remove a center screw, that is holding top cover, using PH2 screwdriver.

2. Mark four points for screw holes in the desired place on the wall for PWR-LINE PRO.

3. Drill using 5 mm drill bit for dowel holes and insert them by slight tapping if necessary.

4. Mount PWR-LINE PRO and close top cover, center screw tightening force 0.5 – 0.7 Nm, attach provided

3M sticker to cover center screw.

The IP rating scale for this device is IPX0.

When mounting indoors, please ensure that cable feed is pointing downwards. We recommend using shielded Cat6

cables for our devices.

Powering

The device accepts powering directly from 100-230 V AC , ~50/60 Hz wall socket it is plugged into. ⏦The

power consumption under maximum load can reach 5 W. Max power consumption with PoE-Out 14 W.

In order to reach a speed of 600 Mbps, your electrical sockets needs to be grounded.

To connect with another PWR-LINE device, both need to be on the one electrical phase.

See mikrotik.com/products for the latest version of this document. Document #49004 Modified on: 14.OCT.2019

Expansion slots and ports

•One Gigabit Ethernet port, supporting 24 V PoE output by default settings is set to OFF.

Buttons and Jumpers

PWR connection button (sync)

•Hold 0.5 – 3 seconds. For 120 seconds will try to communicate with another PWR-LINE PRO device. A

blinking amber LED light indicates that it is in search mode. You have to also do the same on the other

PWR device, so they can synchronize. Press button again to cancel the search.

•Hold 5 – 8 seconds. A new security key is generated. This is needed to remove a PWR-LINE PRO device

from an existing PWR network.

•Hold 10 – 15 seconds. Resets all PWR related settings.

•In case of trouble to pair device, hold the SYNC button for 5 - 8 seconds to generate new network key and

then re-attempt to pair it in PWR-LINE PRO network again holding SYNC button for 0.5 – 3 seconds.

LED lights and PoE switch

1. Blue LED indicates device power ON state.

2. Amber LED indicates that the device is paired, blinking amber indicated that the device is in search mode.

Can be activated with sync button. Please refer to the PWR connection button (sync) section.

3. Green LED indicates Ethernet port connectivity.

4. Red LED indicates that PoE is active.

5. PoE switch by default settings is set to OFF. A standard ballpoint pen can be used to switch positions. The

Red light will indicate that PoE is active.

Accessories

Package includes the following accessories that come with the device:

•K-62 fastening set.

•EU/US power cord, D03+QT1 H03VV-F 0x0.75 mm2, 30 cm RoHS, White color.

Specifications

For more information about this product, specification and pictures please visit our web page:

https://mikrotik.com/product/pl7510gi

See mikrotik.com/products for the latest version of this document. Document #49004 Modified on: 14.OCT.2019

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Note: This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with the

unit to ensure compliance.

Industry Canada

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following

two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,

including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.

L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2)

l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en

compromettre le fonctionnement.

See mikrotik.com/products for the latest version of this document. Document #49004 Modified on: 14.OCT.2019

Product specificaties

Merk:	Mikrotik
Categorie:	Powerline adapter
Model:	PL7510Gi
Kleur van het product:	Wit
Breedte:	94 mm
Diepte:	105 mm
Hoogte:	32 mm
LED-indicatoren:	Ja
Ethernet LAN:	Ja
Aantal per verpakking:	1 stuk(s)
Interfacetype Ethernet LAN:	Gigabit Ethernet
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Maximale overdrachtssnelheid van gegevens:	- Mbit/s
Wifi:	Nee
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50/60 Hz
Bedrijfstemperatuur (T-T):	-40 - 60 °C