Mikoterm eCompact Plus Handleiding

Mikoterm CV Ketel eCompact Plus

Lees hieronder de 📖 handleiding in het Nederlandse voor Mikoterm eCompact Plus (18 pagina's) in de categorie CV Ketel. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/18

Guidebook for installaon, handling and maintenance ENG–

eCompact

Electric block-boiler for heating systems with thermoregulatory microprocessor - IN WALL

FU-eCompact-01/2022

CONTENT

Content

1. Instructions for safe work

1.1 Description of symbols

1.2 Instructions for safe work

2. Device data

2.1. Typology

2.1.1 Statement on compliances

2.1.2 Regular application

2.2 Instructions for mounting

2.3 Instructions for work

2.4 Inhibitors and anti-frost products

2.5 Norms, regulations and standards

2.6 Tools, materials and auxiliary measures

2.7 Minimum distances and burnable construction materials

2.8 Product description

2.9 Waste disposal

2.10 Factory plate

2.11 Dimensions

2.12 Delivery scope

2.13 Technical data

3. Transportation

4. Installation of device

4.1 Be careful prior to assembly

4.2 Distances

4.3 Boiler installation

4.4 Connecting to a hydraulic network

4.5 Connecting to the electric network

4.5.1Connect the external control of the boiler (room thermostat)

4.6 Device Functions

4.6.1 Heating pump air emission and de-blocking

4.6.2 Boiler and installation air emission

4.7 Boiler power selection table

5. Commissioning

5.1 Before commissioning

5.2 First turn on

5.3 Commissioning log

6. Setting the boiler operation

6.1 Symbols that may appear on display

6.2 Warning symbols (codes)

6.3 Error symbols (codes)

6.4 Protection against impermissible pressure and temperature values

6.5 Setting the operating mode

6.6 Description of operating mode

6.7 Setting the heating parameter

6.7.1 Setting the default boiler temperature

6.7.2 Setting the default boiler power

6.8 Room thermostat

6.9 Termination of the work of the heating system

6.10 Switching off the boiler

7. Possible problems, causes and measures to be taken

8. Pump

8.1 Pump Wilo-Para MSL/6-43SC

9. Product data sheet (in accordance with EU regulation no.

811/2013)

Instructions for safe work

1.1

Description of symbols

Warnings

Warnings in text are marked by gray triangle,

background warnings are framed

Electric shock danger is marked by lightning

symbol in warning triangle

The signal words at the beginning of the warning mean the

way and level of consequences if protective measures are not

applied

 means that smaller material damages may occur NOTE

 means that smaller to middle injuries may occur CAUTION

 means that heavy injuries may occur WARNING

 means that heavy injuries may occur DANGER

Important information

Important information, meaning no danger for

people and things, are marked by the symbol

displayed in the following text. These are limited by

lines, above and below the text.

1.2

Instructions for safe work

General safety instructions

Non-compliance with safety instructions may cause heavy

injuries or lethal outcomes and material damages and –

environment pollution.

 Electrical installation should be examined by an expert

prior to the device assembly.

 All electric works should be performed by authorised

person in accordance with corresponding regulations

 Commissioning and maintenance and repairs should be

done by authorised service only

 Technical acceptance of installations should be

performed in accordance with corresponding regulations

Danger because of disrespecting security rules in alert

situations, for example fire.

 Never expose your-self to life danger. Own security

always has priority

Damage occurred because of wrong handling

Wrong handling may lead to injuries of persons and/or

installation damage.

 Make sure that device is available only toprofessionals

 Installation and commissioning, and maintenance and

repair, must be done only by service authorised for

electrical works

 The manufacturer assumes no liability for damage

resulting from improper installation of the unit by the

installer.

Installation and commissioning

 Placement of device can be done only by authorised

service

 Boiler can be turned on only if installation is with

corresponding pressure level and working pressure

regular Do not close the safety valves in any way to .

avoid damage caused by excessive pressure. During

the warm-up period, the water on the safety valve of

the hot water circuit and the hot water pipe may leak.

Periodically check the pressure in the heating system.

Ensure that the pressure is always within the values

given in the manual, regardless of whether the device

has elements that protect it from low or high pressure

operation.

 Install this device only in the room where freezing is not

possible to occur

 Do not store or dispose inflammable materials or

liquids in the vicinity of this device

 Keep safe distance in accordance with valid

regulations

 Never cover the appliance with a fire hazard

 Never close the device on your own. Always consult an

expert for any changes to the device environment

 It is recommended to install an additional control

device - room thermostat. It will allow you to maintain a

stable room temperature value and therefore full

comfort in your living space. Using a room thermostat

saves electricity. Energy. Note that increasing the room

temperature for each grade C increases energy

consumption by approximately 7%. Never cover the

room thermostat. The air circulation around it must be

enabled for its operation to be correct. Follow the

installation instructions that came with the room

thermostat

Life threat of electric power shock

 Secure electric power connecting is done by

authorised service! Comply with connecting scheme

 Prior to any work: turn off electric power supply. Secure

against accidental turn on

 Do not mount this device in moist rooms

Control examination / Maintenance

 Recommendation for user: conclude agreement on

maintenance with authorised service to perform annual

maintenance and controlling examinations

 User is responsible for safety and environmental

acceptance of the installation

 Comply with safety work instruction as given in the

chapter Cleaning and Maintenance

Authentic spare parts

There shall not be undertaken any responsibility for

damage occurred due to spare parts not delivered by the

manufacturer

 Use only original spare parts

Instructions for safe work

Product specificaties

Merk:	Mikoterm
Categorie:	CV Ketel
Model:	eCompact Plus

Heb je hulp nodig?

Als je hulp nodig hebt met Mikoterm eCompact Plus stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding CV Ketel Mikoterm

Mikoterm eCompact Plus Handleiding

23 Maart 2023

Mikoterm eTK 6÷36kW Handleiding

5 Maart 2023

Handleiding CV Ketel

Nieuwste handleidingen voor CV Ketel

Kospel EKD.M3 Handleiding

18 November 2024

Baxi Platinum iPlus Handleiding

17 November 2024

Baxi Platinum Compact Handleiding

17 November 2024

Remeha Tzerra Ace-Matic 35c CW5 Handleiding

7 Augustus 2024

Remeha Tzerra Ace-Matic 28c CW4 Handleiding

7 Augustus 2024

Bosch HRC 26 Basis 1 Handleiding

4 Maart 2024

Bosch HRC 35 Handleiding

23 November 2023

Bosch HRC Turbo Comfort Systeem 30 Handleiding

23 November 2023

Bosch HRC 30 Basis 1 Handleiding

23 November 2023

Viessmann Vitoligno 300-C Handleiding

14 November 2023