Middle Atlantic RK-GD20 Handleiding

Middle Atlantic Niet gecategoriseerd RK-GD20

Lees hieronder de 📖 handleiding in het Nederlandse voor Middle Atlantic RK-GD20 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

I-00189 Rev D

Thank you for purchasing the RK-GDXX Glass Door. Please read these instructions thoroughly

before installing this product.

PRODUCT FEATURES

THANK YOU

- Locking door provides security

- Smoked, tempered glass provides a clean look

Page 2

# 2 Phillips Head Screwdriver or Power Driver with Bit

Door

(QTY -1)

BEFORE BEGINNING INSTALLATION

1) Move the rackrail to the recessed set of enclosure mounting holes using existing wood screws.

NOTE: When moving front rackrail to setback position, mount rail to recessed pilot holes on opposite

end of side panel. This hides the original mounting holes from view.

RACKRAIL

WOOD

SCREW

HARDWARE/ITEMS SUPPLIED

TOOLS REQUIRED

Self-Adhesive Hinge Plate

Hinge

Pivot Bushing (.347” O.D.)

Pivot Bushing (.313 O.D.)

5/8" Pan Head Wood Screw

Stop Pin

Locking Bracket

Magnet

QTY DESCRIPTION

Page 3

1) Determine desired hinge side and install

pivot bushings in top and bottom of rack.

(FIGURE A)

NOTE: Two bushing sizes are provided.

Use appropriate size bushing for your rack.

2) Remove adhesive backing and install both

hinge plates on inside of glass door. (FIGURE B)

LOCKING

BRACKET

WOOD SCREWS

(2) PAN HEAD

MAGNET

INSTALLATION

TOP HINGE

FIGURE A

HINGE

PLATES (2)

FIGURE C FIGURE D

FIGURE E

PIVOT

BUSHING

(TOP)

HINGE

PIVOT

BUSHING

(BOTTOM)

HINGE

PLATE

BOTTOM

HINGE

SCREWS (2)

FIGURE B

3) Slide bottom hinge against door and adjust so that hinge is flush with edge of door.

(FIGURE C, FIGURE D)

4) Tighten (2) screws to secure bottom hinge to hinge plate. (FIGURE C)

NOTE: Do not over tighten.

5) Pivot door into bottom pivot bushing. (FIGURE C)

6) Insert upper hinge into top pivot bushing and hold hinge in place with hand.

(FIGURE A)

7) Slide door into top hinge and adjust position of door, so that

hinge is flush with edge of door. (FIGURE D)

8) Tighten (2) screws to secure upper hinge to hinge plate.

: Do not over tighten.NOTE

9) If neccessary, adjust hinges to balance door opening gaps.

10) Attach locking bracket opposite hinge side with (2) wood

screws provided. Install magnet as shown. (FIGURE E)

PIVOT

BUSHING

(BOTTOM)

FLUSH

EDGE

Product specificaties

Merk:	Middle Atlantic
Categorie:	Niet gecategoriseerd
Model:	RK-GD20
Kleur van het product:	Zwart
Breedte:	474.7 mm
Diepte:	58.42 mm
Hoogte:	887.2 mm
Gewicht verpakking:	5440 g
Breedte verpakking:	558.8 mm
Diepte verpakking:	1003.3 mm
Hoogte verpakking:	146.1 mm
Soort:	Deur
Materiaal behuizing:	Gehard glas
Met slot:	Ja
Duurzaamheidscertificaten:	RoHS
Aantal per verpakking:	1 stuk(s)
Inclusief schroeven:	Ja
Aantal schroeven:	2
Rackcapaciteit:	20U
Code geharmoniseerd systeem (HS):	85389099