Middle Atlantic PDW-12X220J Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Middle Atlantic PDW-12X220J (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
I-00349 Rev A
CONFIGURATOR SOFTWARE SAVES TIME!
Customize and order your PDW
Series Power Strip through our
website, middleatlantic.com.
Our Configurator Software
allows you to define outlet type,
quantity, circuits, groupings
and length - up to 84 inches.
An image of your powerstrip will
be displayed.
THANK YOU
Thank you for purchasing the PDW Series High Capacity Vertical Power Strip. Please read these instructions
thoroughly before installing this product.
PRODUCT FEATURES
- Up to Twenty, 15 AMP or 20 AMP Circuits
- Up to Eight, 30 AMP Circuits
- Custom configurations quickly available
- Circuits are identified on both the receptacles and the wires
- External ground stud for rack and equipment bonding
- Custom length flexible metallic conduit tails available (J-Box standard) to accommodate jobsite conditions.
- Standard and Isolated Ground available
- Receptacles types include: standard, twist-lock, isolated ground, and multiple colors
- Hospital grade receptacles available upon request
Page 2
• WARNING: TO REDUCE THE RISK OF AN ELECTRIC SHOCK, DO NOT EXPOSE TO WATER, RAIN OR MOISTURE
• WARNING: MUST BE CONNECTED TO A MAINS WITH A PROTECTIVE EARTHING CONNECTION
• WARNING: FOR PLUGGABLE EQUIPMENT, THE MAINS PLUG OR AC INLETS USED AS THE DISCONNECT
DEVICES SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHOULD REMAIN READILY ACCESSIBLE
• WARNING: FOR PERMANENTLY CONNECTED EQUIPMENT A READILY ACCESSIBLE DISCONNECT DEVICE
SHALL BE INSTALLED NEAR THE EQUIPMENT POWER SOURCE.
• CAUTION: NO USER SERVICEABLE PARTS
IMPORTANT SAFETY INSTRUCTIONS
• Read these instructions
• Keep these instructions
• Heed all warnings
• Follow all instructions
• Do not use this apparatus near water
• Clean only with dry cloth
• Protect the power cord from being walked on or pinched particularly at plugs, receptacles, and the point where
they exit from the apparatus
• Only use attachments/accessories specified by the manufacturer
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
The lightning flash with the arrowhead symbol,
within an equilateral triangle is intended to alert
the user to the presence of uninsulated
dangerous voltage within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons
DANGEROUS VOLTAGE
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance
ATTENTION
GROUNDING METHODS FOR HARD WIRED POWER STRIPS
STANDARD GROUND MODEL
The green or bare wire extending from the power strip into the J-box is to be connected to the J-box grounding
stud along with the ground wire from the feeder circuit. If there is no ground wire contained in the feeder
circuit, a metallic conduit connection will act as the equipment grounding conductor.
ISOLATED GROUND MODEL
The green wire with the yellow stripe extending from the power strip into the J-box is NOT to be connected
to the J-box grounding stud. This wire is to be connected to an "isolated" (insulated) ground wire coming
from the feeder circuit. This isolated ground wire will only be connected to the ground of the Isolated
Receptacles. The power strip chassis must be connected to a separate safety ground, which is connected to the
J-box grounding stud, or the chassis ground may be provided by a metallic conduit connection.
IMPORTANT NOTE
Although this metallic conduit grounding method is allowed by the National Electrical Code, a separate
grounding conductor is highly recommended to reduce the potential for ground loops in the signal path.
CIRCUIT ARRANGEMENT
Multiple circuit power strips can be wired for single or multiple circuit operation.
Each circuit of the power strip must be connected to a circuit with an overcurrent protection device protecting each
circuit.
HARDWARE KIT (91-00222)
QTY
SCREW 6
OVAL NUT 6
MUST BE INSTALLED BY A QUALIFIED ELECTRICIAN OR ELECTRICAL CONTRACTOR
SLOTHOLE
FIGURE A
Rackrail Bracket
LOCATE MOUNTING HOLES
FLANGE
1) The Holes in the PDW Flange ALIGN over the SLOT and HOLE in the Rackrail Bracket as shown (FIGURE A).
Page 3
FIGURE C
SLIDE PDW
MOUNTING
2) Using the supplied hardware, mount rst through the SLOT in the Rackrail as shown. (FIGURE B)
3) Leave the hardware loosely assembled and slide the Power Strip into your desired position. (FIGURE C)
FIGURE B
SLOT -
(FIRST
MOUNTING
POINT)
NOTE: For optimum stabilty, use all supplied hardware to mount on all available rackrail brackets.


Product specificaties

Merk: Middle Atlantic
Categorie: Niet gecategoriseerd
Model: PDW-12X220J

Heb je hulp nodig?

Als je hulp nodig hebt met Middle Atlantic PDW-12X220J stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Middle Atlantic

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd