MGL Avionics Blaze ASI-5 Handleiding

MGL Avionics Meetapparatuur Blaze ASI-5

Lees hieronder de đź“– handleiding in het Nederlandse voor MGL Avionics Blaze ASI-5 (13 pagina's) in de categorie Meetapparatuur. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/13
Introduction
The ASI-5 is a 3 1/8” sunlight readable instrument that provides a wide range airspeed indication in both digital and
analog tape formats. Airspeed is based on the pressure generated by a pitot tube system and a static port is provided as
well for use by high speed aircraft. In addition, the ASI-5 provides a flight timer since takeoff and records the maximum
airspeed reached.
Airspeed can be indicated in statute miles per hour (mph), kilometers per hour (km/h) or nautical miles per hour (kts). The
analog airspeed tape can be scaled according to the aircraft’s flying speed range and ranges for Vs0, Vs1, Vfe, Vno and
Vne can be set. The ASI-5 also provides a programmable Vs and Vne airspeed alarm output. ASI sensitivity can be
calibrated by the user to cater for errors caused by pitot tube placement.
The ASI-5 instrument measures airspeed from 16mph to 250mph and is well suited to slower aircraft due to very good
sensitivity and linearity at low air speeds.
1 Features
•Large 2.6” high resolution 320x240, IPS (fully viewable in all directions), sunlight readable color LCD
display
• Measures airspeed from 16mph to 250mph and is well suited to slow aircraft due to very good sensitivity
and linearity at low air speeds
• Includes a flight timer since takeoff
• Airspeed units can be set to miles per hour (mph), kilometer per hour (km/h) or nautical miles per hour
(kts)
• Analog tape with programmable ranges for Vs0, Vs1, Vfe, Vno and Vne
• Contains a programmable Vs and Vne airspeed alarm output
• Records maximum airspeed reached in permanent memory
• Standard 3 1/8” aircraft enclosure (can be front or rear mounted)
• The LED backlight can automatically adjust to the ambient light, or it can be manually adjusted in the
menu system
• Rotary control plus 2 independent buttons for easy menu navigation and user input
• Wide input supply voltage range of 8 to 30V DC with built in voltage reversal and over voltage protection
for harsh electrical environments
• 1 year limited warranty
Blaze ASI-5
Airspeed Indicator (ASI)
Operating Manual – English 1.00
Blaze ASI-5 Operating Manual Page 2
2 Layout
3 Main Display
F2 / Down Button:
Menu system: Softkey button
Sunlight readable color graphic display:
The backlight can automatically adjust
to the ambient light or it can be manually
adjusted in the menu system
Rotary Control (Up/Down) & Enter Button:
Press the rotary control during the normal display screens to access the menu system. Rotate anti/clockwise for
up/down menu scrolling. Rotate the rotary control during the normal display mode to view the Max Values display.
F1 / Up Button:
Menu system: Softkey button
Normal Display: Start / Stop the
flight timer (Manual flight only)
3 1/8” enclosure.
Can be front or rear mounted
Airspeed unit
Digital airspeed
Airspeed tape
Duration of flight since takeoff
Vso (Min safe speed, landing)
Vs1 (Min safe speed, normal)
Vfe (Max flap speed)
Vno (Max maneuvering speed)
Vne (Max exceed speed)
Ambient light sensor
Blaze ASI-5 Operating Manual Page 3
3.1 Maximum Airspeed display
This display can be accessed by rotating the rotary control during the normal display
mode. Press the F1/Up button when the max values display is showing to reset the
maximum values to the current airspeed.
3.2 Start / Stop flight display
Press the F1/Up button during the normal display mode
to manually start/stop a flight. This key is only active if
the ASI-5 is setup to select the manual flight option
under the “TIMERS” setup menu.
Note: The maximum airspeed is stored in non-volatile
memory and is recalled on power-up.

Product specificaties

Merk: MGL Avionics
Categorie: Meetapparatuur
Model: Blaze ASI-5

Heb je hulp nodig?

Als je hulp nodig hebt met MGL Avionics Blaze ASI-5 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Meetapparatuur MGL Avionics

MGL Avionics

MGL Avionics FF-5 Handleiding

6 Juli 2023
MGL Avionics

MGL Avionics FF-4 Handleiding

4 Juli 2023
MGL Avionics

MGL Avionics INFO-2 Handleiding

2 Juli 2023
MGL Avionics

MGL Avionics Blaze ASI-5 Handleiding

30 Juni 2023
MGL Avionics

MGL Avionics ALT-5 Handleiding

28 Juni 2023
MGL Avionics

MGL Avionics ASV-1 Handleiding

24 Juni 2023
MGL Avionics

MGL Avionics Vega ASI-4 Handleiding

23 Juni 2023
MGL Avionics

MGL Avionics Blaze ASV-2 Handleiding

21 Juni 2023

Handleiding Meetapparatuur

Nieuwste handleidingen voor Meetapparatuur

Festo

Festo NEDY Handleiding

21 November 2024
Festo

Festo DFPD-10 Handleiding

21 November 2024
Dostmann Electronic

Dostmann Electronic RLD 380 Handleiding

20 November 2024
Milwaukee

Milwaukee 2225-20 Handleiding

19 November 2024
KĂĽbler

KĂĽbler Codix 542 Handleiding

19 November 2024
HT Instruments

HT Instruments FULLTEST3 Handleiding

19 November 2024
Joy-it

Joy-it VM-433 Handleiding

18 November 2024
Joy-it

Joy-it VAM-10010 Handleiding

18 November 2024
Rotronic

Rotronic CP11 Handleiding

18 November 2024
Techno Line

Techno Line MA 10230 Handleiding

18 November 2024